Commit 6a473308 authored by Ron Mercer's avatar Ron Mercer Committed by David S. Miller

qlge: Add/use function for link up/down.

We need to set/clear the mac address register when the link goes up/down
respectively.  Without this both ports of a 2-port device can end up
with the same mac address in a bonding scenario.
The new ql_link_on() and ql_link_off() will also be used in handling
certain firmware events.
Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7fab3bfe
......@@ -1607,6 +1607,8 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev);
int ql_cam_route_initialize(struct ql_adapter *qdev);
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
int ql_mb_about_fw(struct ql_adapter *qdev);
void ql_link_on(struct ql_adapter *qdev);
void ql_link_off(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
......
......@@ -448,6 +448,22 @@ static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
return status;
}
void ql_link_on(struct ql_adapter *qdev)
{
QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
qdev->ndev->name);
netif_carrier_on(qdev->ndev);
ql_set_mac_addr(qdev, 1);
}
void ql_link_off(struct ql_adapter *qdev)
{
QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
qdev->ndev->name);
netif_carrier_off(qdev->ndev);
ql_set_mac_addr(qdev, 0);
}
/* Get a specific frame routing value from the CAM.
* Used for debug and reg dump.
*/
......@@ -1696,13 +1712,13 @@ static void ql_process_mac_tx_intr(struct ql_adapter *qdev,
/* Fire up a handler to reset the MPI processor. */
void ql_queue_fw_error(struct ql_adapter *qdev)
{
netif_carrier_off(qdev->ndev);
ql_link_off(qdev);
queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
}
void ql_queue_asic_error(struct ql_adapter *qdev)
{
netif_carrier_off(qdev->ndev);
ql_link_off(qdev);
ql_disable_interrupts(qdev);
/* Clear adapter up bit to signal the recovery
* process that it shouldn't kill the reset worker
......@@ -3312,7 +3328,7 @@ static int ql_adapter_down(struct ql_adapter *qdev)
int i, status = 0;
struct rx_ring *rx_ring;
netif_carrier_off(qdev->ndev);
ql_link_off(qdev);
/* Don't kill the reset worker thread if we
* are in the process of recovery.
......@@ -3384,7 +3400,7 @@ static int ql_adapter_up(struct ql_adapter *qdev)
*/
if ((ql_read32(qdev, STS) & qdev->port_init) &&
(ql_read32(qdev, STS) & qdev->port_link_up))
netif_carrier_on(qdev->ndev);
ql_link_on(qdev);
ql_enable_interrupts(qdev);
ql_enable_all_completion_interrupts(qdev);
netif_tx_start_all_queues(qdev->ndev);
......@@ -4035,7 +4051,7 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
pci_disable_device(pdev);
return err;
}
netif_carrier_off(ndev);
ql_link_off(qdev);
ql_display_dev_info(ndev);
cards_found++;
return 0;
......
......@@ -238,7 +238,7 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
&qdev->mpi_port_cfg_work, 0);
}
netif_carrier_on(qdev->ndev);
ql_link_on(qdev);
}
static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
......@@ -251,7 +251,7 @@ static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
if (status)
QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
netif_carrier_off(qdev->ndev);
ql_link_off(qdev);
}
static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
......@@ -849,7 +849,7 @@ void ql_mpi_idc_work(struct work_struct *work)
case MB_CMD_PORT_RESET:
case MB_CMD_SET_PORT_CFG:
case MB_CMD_STOP_FW:
netif_carrier_off(qdev->ndev);
ql_link_off(qdev);
/* Signal the resulting link up AEN
* that the frame routing and mac addr
* needs to be set.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment