Skip to content

L
linux
Commit 6a5d3c61 authored by Manivannan Sadhasivam's avatar Manivannan Sadhasivam Committed by Bjorn Andersson
Browse files
Options

ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB 

Telit FN980 TLB is the development platform based on the Qualcomm SDX55
chipset. This basic support includes support for debug serial, NAND
flash, BAM DMA, USB and regulators support.
Signed-off-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-12-manivannan.sadhasivam@linaro.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 222ed6a2
Hide whitespace changes
Inline Side-by-side
Showing with 284 additions and 1 deletion
arch/arm/boot/dts/Makefile
View file @ 6a5d3c61
......@@ -929,7 +929,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb \
qcom-sdx55-mtp.dtb
qcom-sdx55-mtp.dtb \
qcom-sdx55-telit-fn980-tlb.dtb
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
......
arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts 0 → 100644
View file @ 6a5d3c61
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Linaro Ltd.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "qcom-sdx55.dtsi"
#include "qcom-pmx55.dtsi"
/ {
model = "Telit FN980 TLB";
compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55";
qcom,board-id = <0xb010008 0x0>;
aliases {
serial0 = &blsp1_uart3;
};
chosen {
stdout-path = "serial0:921600n8";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
mpss_debug_mem: memory@8ef00000 {
no-map;
reg = <0x8ef00000 0x800000>;
};
ipa_fw_mem: memory@8fced000 {
no-map;
reg = <0x8fced000 0x10000>;
};
mpss_adsp_mem: memory@90800000 {
no-map;
reg = <0x90800000 0xf800000>;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
vreg_bob_3p3: pmx55-bob {
compatible = "regulator-fixed";
regulator-name = "vreg_bob_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
vreg_s7e_mx_0p752: pmx55-s7e {
compatible = "regulator-fixed";
regulator-name = "vreg_s7e_mx_0p752";
regulator-min-microvolt = <752000>;
regulator-max-microvolt = <752000>;
vin-supply = <&vph_pwr>;
};
vreg_sd_vdd: sd-vdd {
compatible = "regulator-fixed";
regulator-name = "vreg_sd_vdd";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
vin-supply = <&vreg_vddpx_2>;
};
vreg_vddpx_2: vddpx-2 {
compatible = "regulator-gpio";
regulator-name = "vreg_vddpx_2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2850000>;
enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
states = <1800000 0>, <2850000 1>;
startup-delay-us = <200000>;
enable-active-high;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
};
&apps_rsc {
pmx55-rpmh-regulators {
compatible = "qcom,pmx55-rpmh-regulators";
qcom,pmic-id = "e";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-l1-l2-supply = <&vreg_s2e_1p224>;
vdd-l3-l9-supply = <&vreg_s3e_0p824>;
vdd-l4-l12-supply = <&vreg_s4e_1p904>;
vdd-l5-l6-supply = <&vreg_s4e_1p904>;
vdd-l7-l8-supply = <&vreg_s3e_0p824>;
vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
vdd-l14-supply = <&vreg_s7e_mx_0p752>;
vdd-l15-supply = <&vreg_s2e_1p224>;
vdd-l16-supply = <&vreg_s4e_1p904>;
vreg_s2e_1p224: smps2 {
regulator-min-microvolt = <1280000>;
regulator-max-microvolt = <1400000>;
};
vreg_s3e_0p824: smps3 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
};
vreg_s4e_1p904: smps4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1960000>;
};
vreg_l1e_bb_1p2: ldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo2 {
regulator-min-microvolt = <1128000>;
regulator-max-microvolt = <1128000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo3 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
vreg_l4e_bb_0p875: ldo4 {
regulator-min-microvolt = <872000>;
regulator-max-microvolt = <872000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
vreg_l5e_bb_1p7: ldo5 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo7 {
regulator-min-microvolt = <480000>;
regulator-max-microvolt = <900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo8 {
regulator-min-microvolt = <480000>;
regulator-max-microvolt = <900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo9 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
vreg_l10e_3p1: ldo10 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo11 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo12 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo13 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo14 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo15 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
ldo16 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
};
};
&blsp1_uart3 {
status = "ok";
};
&qpic_bam {
status = "ok";
};
&qpic_nand {
status = "ok";
nand@0 {
reg = <0>;
nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
/* ico and efs2 partitions are secured */
secure-regions = <0x500000 0x500000
0xa00000 0xb00000>;
};
};
&remoteproc_mpss {
status = "okay";
memory-region = <&mpss_adsp_mem>;
};
&usb_hsphy {
status = "okay";
vdda-pll-supply = <&vreg_l4e_bb_0p875>;
vdda33-supply = <&vreg_l10e_3p1>;
vdda18-supply = <&vreg_l5e_bb_1p7>;
};
&usb_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l4e_bb_0p875>;
vdda-pll-supply = <&vreg_l1e_bb_1p2>;
};
&usb {
status = "okay";
};
&usb_dwc3 {
dr_mode = "peripheral";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7