Merge tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes for 5.14-rc5. They resolve a
  number of small reported issues, including:

   - cdnsp driver fixes

   - usb serial driver fixes and device id updates

   - usb gadget hid fixes

   - usb host driver fixes

   - usb dwc3 driver fixes

   - other usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
  usb: dwc3: gadget: Avoid runtime resume if disabling pullup
  usb: dwc3: gadget: Use list_replace_init() before traversing lists
  USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
  USB: serial: pl2303: fix GT type detection
  USB: serial: option: add Telit FD980 composition 0x1056
  USB: serial: pl2303: fix HX type detection
  USB: serial: ch341: fix character loss at high transfer rates
  usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro
  usb: cdnsp: Fixed issue with ZLP
  usb: cdnsp: Fix incorrect supported maximum speed
  usb: cdns3: Fixed incorrect gadget state
  usb: gadget: f_hid: idle uses the highest byte for duration
  Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
  usb: otg-fsm: Fix hrtimer list corruption
  usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
  usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
  usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
  usb: gadget: f_hid: fixed NULL pointer dereference
  usb: gadget: remove leaked entry from udc driver list
  ...

drivers/thunderbolt/switch.c

@@ -1875,18 +1875,6 @@ static struct attribute *switch_attrs[] = {
 	NULL,
 };
 
-static bool has_port(const struct tb_switch *sw, enum tb_port_type type)
-{
-	const struct tb_port *port;
-
-	tb_switch_for_each_port(sw, port) {
-		if (!port->disabled && port->config.type == type)
-			return true;
-	}
-
-	return false;
-}
-
 static umode_t switch_attr_is_visible(struct kobject *kobj,
 				      struct attribute *attr, int n)
 {
@@ -1895,8 +1883,7 @@ static umode_t switch_attr_is_visible(struct kobject *kobj,
 
 	if (attr == &dev_attr_authorized.attr) {
 		if (sw->tb->security_level == TB_SECURITY_NOPCIE ||
-		    sw->tb->security_level == TB_SECURITY_DPONLY ||
-		    !has_port(sw, TB_TYPE_PCIE_UP))
+		    sw->tb->security_level == TB_SECURITY_DPONLY)
 			return 0;
 	} else if (attr == &dev_attr_device.attr) {
 		if (!sw->device)

drivers/usb/cdns3/cdns3-ep0.c

@@ -731,6 +731,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
 		request->actual = 0;
 		priv_dev->status_completion_no_call = true;
 		priv_dev->pending_status_request = request;
+		usb_gadget_set_state(&priv_dev->gadget, USB_STATE_CONFIGURED);
 		spin_unlock_irqrestore(&priv_dev->lock, flags);
 
 		/*

drivers/usb/cdns3/cdnsp-gadget.c

@@ -1882,7 +1882,7 @@ static int __cdnsp_gadget_init(struct cdns *cdns)
 	pdev->gadget.name = "cdnsp-gadget";
 	pdev->gadget.speed = USB_SPEED_UNKNOWN;
 	pdev->gadget.sg_supported = 1;
-	pdev->gadget.max_speed = USB_SPEED_SUPER_PLUS;
+	pdev->gadget.max_speed = max_speed;
 	pdev->gadget.lpm_capable = 1;
 
 	pdev->setup_buf = kzalloc(CDNSP_EP0_SETUP_SIZE, GFP_KERNEL);

drivers/usb/cdns3/cdnsp-gadget.h

@@ -383,8 +383,8 @@ struct cdnsp_intr_reg {
 #define IMAN_IE			BIT(1)
 #define IMAN_IP			BIT(0)
 /* bits 2:31 need to be preserved */
-#define IMAN_IE_SET(p)		(((p) & IMAN_IE) | 0x2)
-#define IMAN_IE_CLEAR(p)	(((p) & IMAN_IE) & ~(0x2))
+#define IMAN_IE_SET(p)		((p) | IMAN_IE)
+#define IMAN_IE_CLEAR(p)	((p) & ~IMAN_IE)
 
 /* IMOD - Interrupter Moderation Register - irq_control bitmasks. */
 /*

drivers/usb/cdns3/cdnsp-ring.c

@@ -1932,15 +1932,13 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
 		}
 
 		if (enqd_len + trb_buff_len >= full_len) {
-			if (need_zero_pkt && zero_len_trb) {
-				zero_len_trb = true;
-			} else {
-				field &= ~TRB_CHAIN;
-				field |= TRB_IOC;
-				more_trbs_coming = false;
-				need_zero_pkt = false;
-				preq->td.last_trb = ring->enqueue;
-			}
+			if (need_zero_pkt)
+				zero_len_trb = !zero_len_trb;
+
+			field &= ~TRB_CHAIN;
+			field |= TRB_IOC;
+			more_trbs_coming = false;
+			preq->td.last_trb = ring->enqueue;
 		}
 
 		/* Only set interrupt on short packet for OUT endpoints. */
@@ -1955,7 +1953,7 @@ int cdnsp_queue_bulk_tx(struct cdnsp_device *pdev, struct cdnsp_request *preq)
 		length_field = TRB_LEN(trb_buff_len) | TRB_TD_SIZE(remainder) |
 			TRB_INTR_TARGET(0);
 
-		cdnsp_queue_trb(pdev, ring, more_trbs_coming | need_zero_pkt,
+		cdnsp_queue_trb(pdev, ring, more_trbs_coming | zero_len_trb,
 				lower_32_bits(send_addr),
 				upper_32_bits(send_addr),
 				length_field,

drivers/usb/class/usbtmc.c

@@ -2324,17 +2324,10 @@ static void usbtmc_interrupt(struct urb *urb)
 		dev_err(dev, "overflow with length %d, actual length is %d\n",
 			data->iin_wMaxPacketSize, urb->actual_length);
 		fallthrough;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-	case -EILSEQ:
-	case -ETIME:
-	case -EPIPE:
+	default:
 		/* urb terminated, clean up */
 		dev_dbg(dev, "urb terminated, status: %d\n", status);
 		return;
-	default:
-		dev_err(dev, "unknown status received: %d\n", status);
 	}
 exit:
 	rv = usb_submit_urb(urb, GFP_ATOMIC);

drivers/usb/common/usb-otg-fsm.c

@@ -193,7 +193,11 @@ static void otg_start_hnp_polling(struct otg_fsm *fsm)
 	if (!fsm->host_req_flag)
 		return;
 
-	INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+	if (!fsm->hnp_work_inited) {
+		INIT_DELAYED_WORK(&fsm->hnp_polling_work, otg_hnp_polling_work);
+		fsm->hnp_work_inited = true;
+	}
+
 	schedule_delayed_work(&fsm->hnp_polling_work,
 					msecs_to_jiffies(T_HOST_REQ_POLL));
 }

drivers/usb/dwc3/gadget.c

@@ -1741,9 +1741,13 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
 {
 	struct dwc3_request		*req;
 	struct dwc3_request		*tmp;
+	struct list_head		local;
 	struct dwc3			*dwc = dep->dwc;
 
-	list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) {
+restart:
+	list_replace_init(&dep->cancelled_list, &local);
+
+	list_for_each_entry_safe(req, tmp, &local, list) {
 		dwc3_gadget_ep_skip_trbs(dep, req);
 		switch (req->status) {
 		case DWC3_REQUEST_STATUS_DISCONNECTED:
@@ -1761,6 +1765,9 @@ static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep)
 			break;
 		}
 	}
+
+	if (!list_empty(&dep->cancelled_list))
+		goto restart;
 }
 
 static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
@@ -2249,6 +2256,17 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 		}
 	}
 
+	/*
+	 * Avoid issuing a runtime resume if the device is already in the
+	 * suspended state during gadget disconnect.  DWC3 gadget was already
+	 * halted/stopped during runtime suspend.
+	 */
+	if (!is_on) {
+		pm_runtime_barrier(dwc->dev);
+		if (pm_runtime_suspended(dwc->dev))
+			return 0;
+	}
+
 	/*
 	 * Check the return value for successful resume, or error.  For a
 	 * successful resume, the DWC3 runtime PM resume routine will handle
@@ -2958,8 +2976,12 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep,
 {
 	struct dwc3_request	*req;
 	struct dwc3_request	*tmp;
+	struct list_head	local;
 
-	list_for_each_entry_safe(req, tmp, &dep->started_list, list) {
+restart:
+	list_replace_init(&dep->started_list, &local);
+
+	list_for_each_entry_safe(req, tmp, &local, list) {
 		int ret;
 
 		ret = dwc3_gadget_ep_cleanup_completed_request(dep, event,
@@ -2967,6 +2989,9 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep,
 		if (ret)
 			break;
 	}
+
+	if (!list_empty(&dep->started_list))
+		goto restart;
 }
 
 static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep)

drivers/usb/gadget/function/f_hid.c

@@ -41,6 +41,7 @@ struct f_hidg {
 	unsigned char			bInterfaceSubClass;
 	unsigned char			bInterfaceProtocol;
 	unsigned char			protocol;
+	unsigned char			idle;
 	unsigned short			report_desc_length;
 	char				*report_desc;
 	unsigned short			report_length;
@@ -338,6 +339,11 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
 
 	spin_lock_irqsave(&hidg->write_spinlock, flags);
 
+	if (!hidg->req) {
+		spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+		return -ESHUTDOWN;
+	}
+
 #define WRITE_COND (!hidg->write_pending)
 try_again:
 	/* write queue */
@@ -358,8 +364,14 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
 	count  = min_t(unsigned, count, hidg->report_length);
 
 	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
-	status = copy_from_user(req->buf, buffer, count);
 
+	if (!req) {
+		ERROR(hidg->func.config->cdev, "hidg->req is NULL\n");
+		status = -ESHUTDOWN;
+		goto release_write_pending;
+	}
+
+	status = copy_from_user(req->buf, buffer, count);
 	if (status != 0) {
 		ERROR(hidg->func.config->cdev,
 			"copy_from_user error\n");
@@ -387,14 +399,17 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
 
 	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
 
+	if (!hidg->in_ep->enabled) {
+		ERROR(hidg->func.config->cdev, "in_ep is disabled\n");
+		status = -ESHUTDOWN;
+		goto release_write_pending;
+	}
+
 	status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC);
-	if (status < 0) {
-		ERROR(hidg->func.config->cdev,
-			"usb_ep_queue error on int endpoint %zd\n", status);
+	if (status < 0)
 		goto release_write_pending;
-	} else {
+	else
 		status = count;
-	}
 
 	return status;
 release_write_pending:
@@ -523,6 +538,14 @@ static int hidg_setup(struct usb_function *f,
 		goto respond;
 		break;
 
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_GET_IDLE):
+		VDBG(cdev, "get_idle\n");
+		length = min_t(unsigned int, length, 1);
+		((u8 *) req->buf)[0] = hidg->idle;
+		goto respond;
+		break;
+
 	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
 		  | HID_REQ_SET_REPORT):
 		VDBG(cdev, "set_report | wLength=%d\n", ctrl->wLength);
@@ -546,6 +569,14 @@ static int hidg_setup(struct usb_function *f,
 		goto stall;
 		break;
 
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_SET_IDLE):
+		VDBG(cdev, "set_idle\n");
+		length = 0;
+		hidg->idle = value >> 8;
+		goto respond;
+		break;
+
 	case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8
 		  | USB_REQ_GET_DESCRIPTOR):
 		switch (value >> 8) {
@@ -773,6 +804,7 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
 	hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
 	hidg->protocol = HID_REPORT_PROTOCOL;
+	hidg->idle = 1;
 	hidg_ss_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
 	hidg_ss_in_comp_desc.wBytesPerInterval =
 				cpu_to_le16(hidg->report_length);

drivers/usb/gadget/udc/max3420_udc.c

@@ -1255,12 +1255,14 @@ static int max3420_probe(struct spi_device *spi)
 	err = devm_request_irq(&spi->dev, irq, max3420_irq_handler, 0,
 			       "max3420", udc);
 	if (err < 0)
-		return err;
+		goto del_gadget;
 
 	udc->thread_task = kthread_create(max3420_thread, udc,
 					  "max3420-thread");
-	if (IS_ERR(udc->thread_task))
-		return PTR_ERR(udc->thread_task);
+	if (IS_ERR(udc->thread_task)) {
+		err = PTR_ERR(udc->thread_task);
+		goto del_gadget;
+	}
 
 	irq = of_irq_get_byname(spi->dev.of_node, "vbus");
 	if (irq <= 0) { /* no vbus irq implies self-powered design */
@@ -1280,10 +1282,14 @@ static int max3420_probe(struct spi_device *spi)
 		err = devm_request_irq(&spi->dev, irq,
 				       max3420_vbus_handler, 0, "vbus", udc);
 		if (err < 0)
-			return err;
+			goto del_gadget;
 	}
 
 	return 0;
+
+del_gadget:
+	usb_del_gadget_udc(&udc->gadget);
+	return err;
 }
 
 static int max3420_remove(struct spi_device *spi)

drivers/usb/host/ohci-at91.c

@@ -611,8 +611,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
 	if (ohci_at91->wakeup)
 		enable_irq_wake(hcd->irq);
 
-	ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
-
 	ret = ohci_suspend(hcd, ohci_at91->wakeup);
 	if (ret) {
 		if (ohci_at91->wakeup)
@@ -632,7 +630,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
 		/* flush the writes */
 		(void) ohci_readl (ohci, &ohci->regs->control);
 		msleep(1);
+		ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
 		at91_stop_clock(ohci_at91);
+	} else {
+		ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
 	}
 
 	return ret;
@@ -644,6 +645,8 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
 
+	ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0);
+
 	if (ohci_at91->wakeup)
 		disable_irq_wake(hcd->irq);
 	else
@@ -651,8 +654,6 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 
 	ohci_resume(hcd, false);
 
-	ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0);
-
 	return 0;
 }
 

drivers/usb/musb/omap2430.c

@@ -35,6 +35,7 @@ struct omap2430_glue {
 	struct device		*control_otghs;
 	unsigned int		is_runtime_suspended:1;
 	unsigned int		needs_resume:1;
+	unsigned int		phy_suspended:1;
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
@@ -458,8 +459,10 @@ static int omap2430_runtime_suspend(struct device *dev)
 
 	omap2430_low_level_exit(musb);
 
-	phy_power_off(musb->phy);
-	phy_exit(musb->phy);
+	if (!glue->phy_suspended) {
+		phy_power_off(musb->phy);
+		phy_exit(musb->phy);
+	}
 
 	glue->is_runtime_suspended = 1;
 
@@ -474,8 +477,10 @@ static int omap2430_runtime_resume(struct device *dev)
 	if (!musb)
 		return 0;
 
-	phy_init(musb->phy);
-	phy_power_on(musb->phy);
+	if (!glue->phy_suspended) {
+		phy_init(musb->phy);
+		phy_power_on(musb->phy);
+	}
 
 	omap2430_low_level_init(musb);
 	musb_writel(musb->mregs, OTG_INTERFSEL,
@@ -489,7 +494,21 @@ static int omap2430_runtime_resume(struct device *dev)
 	return 0;
 }
 
+/* I2C and SPI PHYs need to be suspended before the glue layer */
 static int omap2430_suspend(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+	struct musb *musb = glue_to_musb(glue);
+
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	glue->phy_suspended = 1;
+
+	return 0;
+}
+
+/* Glue layer needs to be suspended after musb_suspend() */
+static int omap2430_suspend_late(struct device *dev)
 {
 	struct omap2430_glue *glue = dev_get_drvdata(dev);
 
@@ -501,7 +520,7 @@ static int omap2430_suspend(struct device *dev)
 	return omap2430_runtime_suspend(dev);
 }
 
-static int omap2430_resume(struct device *dev)
+static int omap2430_resume_early(struct device *dev)
 {
 	struct omap2430_glue *glue = dev_get_drvdata(dev);
 
@@ -513,10 +532,24 @@ static int omap2430_resume(struct device *dev)
 	return omap2430_runtime_resume(dev);
 }
 
+static int omap2430_resume(struct device *dev)
+{
+	struct omap2430_glue *glue = dev_get_drvdata(dev);
+	struct musb *musb = glue_to_musb(glue);
+
+	phy_init(musb->phy);
+	phy_power_on(musb->phy);
+	glue->phy_suspended = 0;
+
+	return 0;
+}
+
 static const struct dev_pm_ops omap2430_pm_ops = {
 	.runtime_suspend = omap2430_runtime_suspend,
 	.runtime_resume = omap2430_runtime_resume,
 	.suspend = omap2430_suspend,
+	.suspend_late = omap2430_suspend_late,
+	.resume_early = omap2430_resume_early,
 	.resume = omap2430_resume,
 };
 

drivers/usb/serial/ch341.c

@@ -851,6 +851,7 @@ static struct usb_serial_driver ch341_device = {
 		.owner	= THIS_MODULE,
 		.name	= "ch341-uart",
 	},
+	.bulk_in_size      = 512,
 	.id_table          = id_table,
 	.num_ports         = 1,
 	.open              = ch341_open,

drivers/usb/serial/ftdi_sio.c

@@ -219,6 +219,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_AUTO_M3_OP_COM_V2_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -159,6 +159,9 @@
 /* Vardaan Enterprises Serial Interface VEUSB422R3 */
 #define FTDI_VARDAAN_PID	0xF070
 
+/* Auto-M3 Ltd. - OP-COM USB V2 - OBD interface Adapter */
+#define FTDI_AUTO_M3_OP_COM_V2_PID	0x4f50
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */

drivers/usb/serial/option.c

@@ -1203,6 +1203,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1055, 0xff),	/* Telit FN980 (PCIe) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff),	/* Telit FD980 */
+	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),

drivers/usb/serial/pl2303.c

@@ -418,24 +418,34 @@ static int pl2303_detect_type(struct usb_serial *serial)
 	bcdDevice = le16_to_cpu(desc->bcdDevice);
 	bcdUSB = le16_to_cpu(desc->bcdUSB);
 
-	switch (bcdDevice) {
-	case 0x100:
-		/*
-		 * Assume it's an HXN-type if the device doesn't support the old read
-		 * request value.
-		 */
-		if (bcdUSB == 0x200 && !pl2303_supports_hx_status(serial))
-			return TYPE_HXN;
+	switch (bcdUSB) {
+	case 0x110:
+		switch (bcdDevice) {
+		case 0x300:
+			return TYPE_HX;
+		case 0x400:
+			return TYPE_HXD;
+		default:
+			return TYPE_HX;
+		}
 		break;
-	case 0x300:
-		if (bcdUSB == 0x200)
+	case 0x200:
+		switch (bcdDevice) {
+		case 0x100:
+		case 0x305:
+			/*
+			 * Assume it's an HXN-type if the device doesn't
+			 * support the old read request value.
+			 */
+			if (!pl2303_supports_hx_status(serial))
+				return TYPE_HXN;
+			break;
+		case 0x300:
 			return TYPE_TA;
-
-		return TYPE_HX;
-	case 0x400:
-		return TYPE_HXD;
-	case 0x500:
-		return TYPE_TB;
+		case 0x500:
+			return TYPE_TB;
+		}
+		break;
 	}
 
 	dev_err(&serial->interface->dev,

drivers/usb/typec/tcpm/tcpm.c

@@ -5369,7 +5369,7 @@ EXPORT_SYMBOL_GPL(tcpm_pd_hard_reset);
 void tcpm_sink_frs(struct tcpm_port *port)
 {
 	spin_lock(&port->pd_event_lock);
-	port->pd_events = TCPM_FRS_EVENT;
+	port->pd_events |= TCPM_FRS_EVENT;
 	spin_unlock(&port->pd_event_lock);
 	kthread_queue_work(port->wq, &port->event_work);
 }
@@ -5378,7 +5378,7 @@ EXPORT_SYMBOL_GPL(tcpm_sink_frs);
 void tcpm_sourcing_vbus(struct tcpm_port *port)
 {
 	spin_lock(&port->pd_event_lock);
-	port->pd_events = TCPM_SOURCING_VBUS;
+	port->pd_events |= TCPM_SOURCING_VBUS;
 	spin_unlock(&port->pd_event_lock);
 	kthread_queue_work(port->wq, &port->event_work);
 }

include/linux/usb/otg-fsm.h

@@ -196,6 +196,7 @@ struct otg_fsm {
 	struct mutex lock;
 	u8 *host_req_flag;
 	struct delayed_work hnp_polling_work;
+	bool hnp_work_inited;
 	bool state_changed;
 };