[PATCH] cleanup double semicolons

From: Nuno Monteiro <nuno@itsari.org>

Remove lots of double-semicolons.

arch/arm/mach-pxa/leds-lubbock.c

@@ -88,7 +88,7 @@ void lubbock_leds_event(led_event_t evt)
 		break;
 
 	case led_green_on:
-		hw_led_state |= D21;;
+		hw_led_state |= D21;
 		break;
 
 	case led_green_off:
@@ -96,7 +96,7 @@ void lubbock_leds_event(led_event_t evt)
 		break;
 
 	case led_amber_on:
-		hw_led_state |= D22;;
+		hw_led_state |= D22;
 		break;
 
 	case led_amber_off:
@@ -104,7 +104,7 @@ void lubbock_leds_event(led_event_t evt)
 		break;
 
 	case led_red_on:
-		hw_led_state |= D23;;
+		hw_led_state |= D23;
 		break;
 
 	case led_red_off:

drivers/char/ipmi/ipmi_bt_sm.c

@@ -445,7 +445,7 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time)
 
 	case BT_STATE_RESET1:
     		reset_flags(bt);
-    		bt->timeout = BT_RESET_DELAY;;
+    		bt->timeout = BT_RESET_DELAY;
 		bt->state = BT_STATE_RESET2;
 		break;
 

drivers/net/wireless/hermes.h

@@ -384,7 +384,7 @@ static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsi
 
 static inline void hermes_write_words(struct hermes *hw, int off, const void *buf, unsigned count)
 {
-	off = off << hw->reg_spacing;;
+	off = off << hw->reg_spacing;
 
 	if (hw->io_space) {
 		outsw(hw->iobase + off, buf, count);
@@ -406,7 +406,7 @@ static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count
 {
 	unsigned i;
 
-	off = off << hw->reg_spacing;;
+	off = off << hw->reg_spacing;
 
 	if (hw->io_space) {
 		for (i = 0; i < count; i++)

drivers/scsi/pci2000.c

@@ -353,7 +353,7 @@ irqProceed:;
 		if ( WaitReady (padapter) )
 			{
 			OpDone (SCpnt, DID_TIME_OUT << 16);
-			goto irq_return;;
+			goto irq_return;
 			}
 
 		outb_p (tag0, padapter->mb0);										// get real error code
@@ -361,7 +361,7 @@ irqProceed:;
 		if ( WaitReady (padapter) )											// wait for controller to suck up the op
 			{
 			OpDone (SCpnt, DID_TIME_OUT << 16);
-			goto irq_return;;
+			goto irq_return;
 			}
 
 		error = inl (padapter->mb0);										// get error data
@@ -374,16 +374,16 @@ irqProceed:;
 			if ( bus )														// are we doint SCSI commands?
 				{
 				OpDone (SCpnt, (DID_OK << 16) | 2);
-				goto irq_return;;
+				goto irq_return;
 				}
 			if ( *SCpnt->cmnd == SCSIOP_TEST_UNIT_READY )
 				OpDone (SCpnt, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2);	// test caller we have sense data too
 			else
 				OpDone (SCpnt, DID_ERROR << 16);
-			goto irq_return;;
+			goto irq_return;
 			}
 		OpDone (SCpnt, DID_ERROR << 16);
-		goto irq_return;;
+		goto irq_return;
 		}
 
 	outb_p (0xFF, padapter->tag);											// clear the op interrupt