Add dma_declare_coherent_memory() API

This adds the description and a null prototype.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Documentation/DMA-API.txt

@@ -444,4 +444,83 @@ dma_alloc_noncoherent(), starting at virtual address vaddr and
 continuing on for size.  Again, you *must* observe the cache line
 boundaries when doing this.
 
+int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int
+			    flags)
+
+
+Declare region of memory to be handed out by dma_alloc_coherent when
+it's asked for coherent memory for this device.
+
+bus_addr is the physical address to which the memory is currently
+assigned in the bus responding region (this will be used by the
+platform to perform the mapping)
+
+device_addr is the physical address the device needs to be programmed
+with actually to address this memory (this will be handed out as the
+dma_addr_t in dma_alloc_coherent())
+
+size is the size of the area (must be multiples of PAGE_SIZE).
+
+flags can be or'd together and are
+
+DMA_MEMORY_MAP - request that the memory returned from
+dma_alloc_coherent() be directly writeable.
+
+DMA_MEMORY_IO - request that the memory returned from
+dma_alloc_coherent() be addressable using read/write/memcpy_toio etc.
+
+One or both of these flags must be present
+
+DMA_MEMORY_INCLUDES_CHILDREN - make the declared memory be allocated by
+dma_alloc_coherent of any child devices of this one (for memory residing
+on a bridge).
+
+DMA_MEMORY_EXCLUSIVE - only allocate memory from the declared regions. 
+Do not allow dma_alloc_coherent() to fall back to system memory when
+it's out of memory in the declared region.
+
+The return value will be either DMA_MEMORY_MAP or DMA_MEMORY_IO and
+must correspond to a passed in flag (i.e. no returning DMA_MEMORY_IO
+if only DMA_MEMORY_MAP were passed in) for success or zero for
+failure.
+
+Note, for DMA_MEMORY_IO returns, all subsequent memory returned by
+dma_alloc_coherent() may no longer be accessed directly, but instead
+must be accessed using the correct bus functions.  If your driver
+isn't prepared to handle this contingency, it should not specify
+DMA_MEMORY_IO in the input flags.
+
+As a simplification for the platforms, only *one* such region of
+memory may be declared per device.
+
+For reasons of efficiency, most platforms choose to track the declared
+region only at the granularity of a page.  For smaller allocations,
+you should use the dma_pool() API.
+
+void
+dma_release_declared_memory(struct device *dev)
+
+Remove the memory region previously declared from the system.  This
+API performs *no* in-use checking for this region and will return
+unconditionally having removed all the required structures.  It is the
+drivers job to ensure that no parts of this memory region are
+currently in use.
+
+void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size)
+
+This is used to occupy specific regions of the declared space
+(dma_alloc_coherent() will hand out the first free region it finds).
+
+device_addr is the *device* address of the region requested
+
+size is the size (and should be a page sized multiple).
+
+The return value will be either a pointer to the processor virtual
+address of the memory, or an error (via PTR_ERR()) if any part of the
+region is occupied.
+
 

include/linux/dma-mapping.h

@@ -42,6 +42,32 @@ static inline u64 dma_get_required_mask(struct device *dev)
 }
 #endif
 
+/* flags for the coherent memory api */
+#define	DMA_MEMORY_MAP			0x01
+#define DMA_MEMORY_IO			0x02
+#define DMA_MEMORY_INCLUDES_CHILDREN	0x04
+#define DMA_MEMORY_EXCLUSIVE		0x08
+
+#ifndef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+static inline int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags)
+{
+	return 0;
+}
+
+static inline void
+dma_release_declared_memory(struct device *dev)
+{
+}
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+					dma_addr_t device_addr, size_t size)
+{
+	return ERR_PTR(-EBUSY);
+}
+#endif
+
 #endif