Merge back cpufreq material for v4.16.

Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt

@@ -14,3 +14,22 @@ following property before the previous one:
 Example:
 
 compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+
+Power management
+----------------
+
+For power management (particularly DVFS and AVS), the North Bridge
+Power Management component is needed:
+
+Required properties:
+- compatible     : should contain "marvell,armada-3700-nb-pm", "syscon";
+- reg            : the register start and length for the North Bridge
+		    Power Management
+
+Example:
+
+nb_pm: syscon@14000 {
+	compatible = "marvell,armada-3700-nb-pm", "syscon";
+	reg = <0x14000 0x60>;
+}

Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt

+Texas Instruments OMAP compatible OPP supply description
+
+OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which
+contain data that can be used to adjust voltages programmed for some of their
+supplies for more efficient operation. This binding provides the information
+needed to read these values and use them to program the main regulator during
+an OPP transitions.
+
+Also, some supplies may have an associated vbb-supply which is an Adaptive Body
+Bias regulator which much be transitioned in a specific sequence with regards
+to the vdd-supply and clk when making an OPP transition. By supplying two
+regulators to the device that will undergo OPP transitions we can make use
+of the multi regulator binding that is part of the OPP core described here [1]
+to describe both regulators needed by the platform.
+
+[1] Documentation/devicetree/bindings/opp/opp.txt
+
+Required Properties for Device Node:
+- vdd-supply: phandle to regulator controlling VDD supply
+- vbb-supply: phandle to regulator controlling Body Bias supply
+	      (Usually Adaptive Body Bias regulator)
+
+Required Properties for opp-supply node:
+- compatible: Should be one of:
+	"ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB
+	"ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD
+			    along with VBB
+	"ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD
+			    but no VBB.
+- reg: Address and length of the efuse register set for the device (mandatory
+	only for "ti,omap5-opp-supply")
+- ti,efuse-settings: An array of u32 tuple items providing information about
+	optimized efuse configuration. Each item consists of the following:
+	volt: voltage in uV - reference voltage (OPP voltage)
+	efuse_offseet: efuse offset from reg where the optimized voltage is stored.
+- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply.
+
+Example:
+
+/* Device Node (CPU)  */
+cpus {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+
+		...
+
+		vdd-supply = <&vcc>;
+		vbb-supply = <&abb_mpu>;
+	};
+};
+
+/* OMAP OPP Supply with Class0 registers */
+opp_supply_mpu: opp_supply@4a003b20 {
+	compatible = "ti,omap5-opp-supply";
+	reg = <0x4a003b20 0x8>;
+	ti,efuse-settings = <
+	/* uV   offset */
+	1060000 0x0
+	1160000 0x4
+	1210000 0x8
+	>;
+	ti,absolute-max-voltage-uv = <1500000>;
+};

MAINTAINERS

@@ -1583,6 +1583,7 @@ F:	arch/arm/boot/dts/kirkwood*
 F:	arch/arm/configs/mvebu_*_defconfig
 F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
+F:	drivers/cpufreq/armada-37xx-cpufreq.c
 F:	drivers/cpufreq/mvebu-cpufreq.c
 F:	drivers/irqchip/irq-armada-370-xp.c
 F:	drivers/irqchip/irq-mvebu-*

drivers/cpufreq/Kconfig.arm

@@ -2,6 +2,29 @@
 # ARM CPU Frequency scaling drivers
 #
 
+config ACPI_CPPC_CPUFREQ
+	tristate "CPUFreq driver based on the ACPI CPPC spec"
+	depends on ACPI_PROCESSOR
+	select ACPI_CPPC_LIB
+	help
+	  This adds a CPUFreq driver which uses CPPC methods
+	  as described in the ACPIv5.1 spec. CPPC stands for
+	  Collaborative Processor Performance Controls. It
+	  is based on an abstract continuous scale of CPU
+	  performance values which allows the remote power
+	  processor to flexibly optimize for power and
+	  performance. CPPC relies on power management firmware
+	  support for its operation.
+
+	  If in doubt, say N.
+
+config ARM_ARMADA_37XX_CPUFREQ
+	tristate "Armada 37xx CPUFreq support"
+	depends on ARCH_MVEBU
+	help
+	  This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
+	  The Armada 37xx PMU supports 4 frequency and VDD levels.
+
 # big LITTLE core layer and glue drivers
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
@@ -12,6 +35,30 @@ config ARM_BIG_LITTLE_CPUFREQ
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
 
+config ARM_DT_BL_CPUFREQ
+	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && OF
+	help
+	  This enables probing via DT for Generic CPUfreq driver for ARM
+	  big.LITTLE platform. This gets frequency tables from DT.
+
+config ARM_SCPI_CPUFREQ
+	tristate "SCPI based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
+	help
+	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
+	  using SCPI protocol for CPU power management.
+
+	  This driver uses SCPI Message Protocol driver to interact with the
+	  firmware providing the CPU DVFS functionality.
+
+config ARM_VEXPRESS_SPC_CPUFREQ
+	tristate "Versatile Express SPC based CPUfreq driver"
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
+	help
+	  This add the CPUfreq driver support for Versatile Express
+	  big.LITTLE platforms using SPC for power management.
+
 config ARM_BRCMSTB_AVS_CPUFREQ
 	tristate "Broadcom STB AVS CPUfreq driver"
 	depends on ARCH_BRCMSTB || COMPILE_TEST
@@ -33,20 +80,6 @@ config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
 
 	  If in doubt, say N.
 
-config ARM_DT_BL_CPUFREQ
-	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && OF
-	help
-	  This enables probing via DT for Generic CPUfreq driver for ARM
-	  big.LITTLE platform. This gets frequency tables from DT.
-
-config ARM_VEXPRESS_SPC_CPUFREQ
-        tristate "Versatile Express SPC based CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
-        help
-          This add the CPUfreq driver support for Versatile Express
-	  big.LITTLE platforms using SPC for power management.
-
 config ARM_EXYNOS5440_CPUFREQ
 	tristate "SAMSUNG EXYNOS5440"
 	depends on SOC_EXYNOS5440
@@ -205,16 +238,6 @@ config ARM_SA1100_CPUFREQ
 config ARM_SA1110_CPUFREQ
 	bool
 
-config ARM_SCPI_CPUFREQ
-        tristate "SCPI based CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
-        help
-	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
-	  using SCPI protocol for CPU power management.
-
-	  This driver uses SCPI Message Protocol driver to interact with the
-	  firmware providing the CPU DVFS functionality.
-
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
@@ -275,20 +298,3 @@ config ARM_PXA2xx_CPUFREQ
 	  This add the CPUFreq driver support for Intel PXA2xx SOCs.
 
 	  If in doubt, say N.
-
-config ACPI_CPPC_CPUFREQ
-	tristate "CPUFreq driver based on the ACPI CPPC spec"
-	depends on ACPI_PROCESSOR
-	select ACPI_CPPC_LIB
-	default n
-	help
-	  This adds a CPUFreq driver which uses CPPC methods
-	  as described in the ACPIv5.1 spec. CPPC stands for
-	  Collaborative Processor Performance Controls. It
-	  is based on an abstract continuous scale of CPU
-	  performance values which allows the remote power
-	  processor to flexibly optimize for power and
-	  performance. CPPC relies on power management firmware
-	  support for its operation.
-
-	  If in doubt, say N.

drivers/cpufreq/Makefile

@@ -52,23 +52,26 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
 # LITTLE drivers, so that it is probed last.
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ)	+= armada-37xx-cpufreq.o
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
+obj-$(CONFIG_ACPI_CPPC_CPUFREQ)		+= cppc_cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
 obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
 obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
@@ -81,8 +84,6 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
 obj-$(CONFIG_ARM_TI_CPUFREQ)		+= ti-cpufreq.o
 obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ)	+= vexpress-spc-cpufreq.o
-obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
-obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 
 
 ##################################################################################

drivers/cpufreq/armada-37xx-cpufreq.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CPU frequency scaling support for Armada 37xx platform.
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* Power management in North Bridge register set */
+#define ARMADA_37XX_NB_L0L1	0x18
+#define ARMADA_37XX_NB_L2L3	0x1C
+#define  ARMADA_37XX_NB_TBG_DIV_OFF	13
+#define  ARMADA_37XX_NB_TBG_DIV_MASK	0x7
+#define  ARMADA_37XX_NB_CLK_SEL_OFF	11
+#define  ARMADA_37XX_NB_CLK_SEL_MASK	0x1
+#define  ARMADA_37XX_NB_CLK_SEL_TBG	0x1
+#define  ARMADA_37XX_NB_TBG_SEL_OFF	9
+#define  ARMADA_37XX_NB_TBG_SEL_MASK	0x3
+#define  ARMADA_37XX_NB_VDD_SEL_OFF	6
+#define  ARMADA_37XX_NB_VDD_SEL_MASK	0x3
+#define  ARMADA_37XX_NB_CONFIG_SHIFT	16
+#define ARMADA_37XX_NB_DYN_MOD	0x24
+#define  ARMADA_37XX_NB_CLK_SEL_EN	BIT(26)
+#define  ARMADA_37XX_NB_TBG_EN		BIT(28)
+#define  ARMADA_37XX_NB_DIV_EN		BIT(29)
+#define  ARMADA_37XX_NB_VDD_EN		BIT(30)
+#define  ARMADA_37XX_NB_DFS_EN		BIT(31)
+#define ARMADA_37XX_NB_CPU_LOAD 0x30
+#define  ARMADA_37XX_NB_CPU_LOAD_MASK	0x3
+#define  ARMADA_37XX_DVFS_LOAD_0	0
+#define  ARMADA_37XX_DVFS_LOAD_1	1
+#define  ARMADA_37XX_DVFS_LOAD_2	2
+#define  ARMADA_37XX_DVFS_LOAD_3	3
+
+/*
+ * On Armada 37xx the Power management manages 4 level of CPU load,
+ * each level can be associated with a CPU clock source, a CPU
+ * divider, a VDD level, etc...
+ */
+#define LOAD_LEVEL_NR	4
+
+struct armada_37xx_dvfs {
+	u32 cpu_freq_max;
+	u8 divider[LOAD_LEVEL_NR];
+};
+
+static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
+	{.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
+	{.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
+	{.cpu_freq_max = 800*1000*1000,  .divider = {1, 2, 3, 4} },
+	{.cpu_freq_max = 600*1000*1000,  .divider = {2, 4, 5, 6} },
+};
+
+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
+		if (freq == armada_37xx_dvfs[i].cpu_freq_max)
+			return &armada_37xx_dvfs[i];
+	}
+
+	pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
+	return NULL;
+}
+
+/*
+ * Setup the four level managed by the hardware. Once the four level
+ * will be configured then the DVFS will be enabled.
+ */
+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
+						 struct clk *clk, u8 *divider)
+{
+	int load_lvl;
+	struct clk *parent;
+
+	for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
+		unsigned int reg, mask, val, offset = 0;
+
+		if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
+			reg = ARMADA_37XX_NB_L0L1;
+		else
+			reg = ARMADA_37XX_NB_L2L3;
+
+		if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
+		    load_lvl == ARMADA_37XX_DVFS_LOAD_2)
+			offset += ARMADA_37XX_NB_CONFIG_SHIFT;
+
+		/* Set cpu clock source, for all the level we use TBG */
+		val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
+		mask = (ARMADA_37XX_NB_CLK_SEL_MASK
+			<< ARMADA_37XX_NB_CLK_SEL_OFF);
+
+		/*
+		 * Set cpu divider based on the pre-computed array in
+		 * order to have balanced step.
+		 */
+		val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
+		mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
+			<< ARMADA_37XX_NB_TBG_DIV_OFF);
+
+		/* Set VDD divider which is actually the load level. */
+		val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
+		mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
+			<< ARMADA_37XX_NB_VDD_SEL_OFF);
+
+		val <<= offset;
+		mask <<= offset;
+
+		regmap_update_bits(base, reg, mask, val);
+	}
+
+	/*
+	 * Set cpu clock source, for all the level we keep the same
+	 * clock source that the one already configured. For this one
+	 * we need to use the clock framework
+	 */
+	parent = clk_get_parent(clk);
+	clk_set_parent(clk, parent);
+}
+
+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
+{
+	unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
+		mask = ARMADA_37XX_NB_DFS_EN;
+
+	regmap_update_bits(base, reg, mask, 0);
+}
+
+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
+{
+	unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
+		mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
+
+	/* Start with the highest load (0) */
+	val = ARMADA_37XX_DVFS_LOAD_0;
+	regmap_update_bits(base, reg, mask, val);
+
+	/* Now enable DVFS for the CPUs */
+	reg = ARMADA_37XX_NB_DYN_MOD;
+	mask =	ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
+		ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
+		ARMADA_37XX_NB_DFS_EN;
+
+	regmap_update_bits(base, reg, mask, mask);
+}
+
+static int __init armada37xx_cpufreq_driver_init(void)
+{
+	struct armada_37xx_dvfs *dvfs;
+	struct platform_device *pdev;
+	unsigned int cur_frequency;
+	struct regmap *nb_pm_base;
+	struct device *cpu_dev;
+	int load_lvl, ret;
+	struct clk *clk;
+
+	nb_pm_base =
+		syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
+
+	if (IS_ERR(nb_pm_base))
+		return -ENODEV;
+
+	/* Before doing any configuration on the DVFS first, disable it */
+	armada37xx_cpufreq_disable_dvfs(nb_pm_base);
+
+	/*
+	 * On CPU 0 register the operating points supported (which are
+	 * the nominal CPU frequency and full integer divisions of
+	 * it).
+	 */
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev) {
+		dev_err(cpu_dev, "Cannot get CPU\n");
+		return -ENODEV;
+	}
+
+	clk = clk_get(cpu_dev, 0);
+	if (IS_ERR(clk)) {
+		dev_err(cpu_dev, "Cannot get clock for CPU0\n");
+		return PTR_ERR(clk);
+	}
+
+	/* Get nominal (current) CPU frequency */
+	cur_frequency = clk_get_rate(clk);
+	if (!cur_frequency) {
+		dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
+		return -EINVAL;
+	}
+
+	dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
+	if (!dvfs)
+		return -EINVAL;
+
+	armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
+
+	for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
+	     load_lvl++) {
+		unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
+
+		ret = dev_pm_opp_add(cpu_dev, freq, 0);
+		if (ret) {
+			/* clean-up the already added opp before leaving */
+			while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
+				freq = cur_frequency / dvfs->divider[load_lvl];
+				dev_pm_opp_remove(cpu_dev, freq);
+			}
+			return ret;
+		}
+	}
+
+	/* Now that everything is setup, enable the DVFS at hardware level */
+	armada37xx_cpufreq_enable_dvfs(nb_pm_base);
+
+	pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+
+	return PTR_ERR_OR_ZERO(pdev);
+}
+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
+late_initcall(armada37xx_cpufreq_driver_init);
+
+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
+MODULE_LICENSE("GPL");

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = {
 
 	{ .compatible = "marvell,armadaxp", },
 
+	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt2712", },
+	{ .compatible = "mediatek,mt7622", },
+	{ .compatible = "mediatek,mt7623", },
+	{ .compatible = "mediatek,mt817x", },
+	{ .compatible = "mediatek,mt8173", },
+	{ .compatible = "mediatek,mt8176", },
+
 	{ .compatible = "nvidia,tegra124", },
 
 	{ .compatible = "st,stih407", },

drivers/cpufreq/cpufreq.c

@@ -601,19 +601,18 @@ static struct cpufreq_governor *find_governor(const char *str_governor)
 /**
  * cpufreq_parse_governor - parse a governor string
  */
-static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
-				struct cpufreq_governor **governor)
+static int cpufreq_parse_governor(char *str_governor,
+				  struct cpufreq_policy *policy)
 {
-	int err = -EINVAL;
-
 	if (cpufreq_driver->setpolicy) {
 		if (!strncasecmp(str_governor, "performance", CPUFREQ_NAME_LEN)) {
-			*policy = CPUFREQ_POLICY_PERFORMANCE;
-			err = 0;
-		} else if (!strncasecmp(str_governor, "powersave",
-						CPUFREQ_NAME_LEN)) {
-			*policy = CPUFREQ_POLICY_POWERSAVE;
-			err = 0;
+			policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+			return 0;
+		}
+
+		if (!strncasecmp(str_governor, "powersave", CPUFREQ_NAME_LEN)) {
+			policy->policy = CPUFREQ_POLICY_POWERSAVE;
+			return 0;
 		}
 	} else {
 		struct cpufreq_governor *t;
@@ -621,26 +620,31 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy,
 		mutex_lock(&cpufreq_governor_mutex);
 
 		t = find_governor(str_governor);
-
-		if (t == NULL) {
+		if (!t) {
 			int ret;
 
 			mutex_unlock(&cpufreq_governor_mutex);
+
 			ret = request_module("cpufreq_%s", str_governor);
-			mutex_lock(&cpufreq_governor_mutex);
+			if (ret)
+				return -EINVAL;
 
-			if (ret == 0)
-				t = find_governor(str_governor);
-		}
+			mutex_lock(&cpufreq_governor_mutex);
 
-		if (t != NULL) {
-			*governor = t;
-			err = 0;
+			t = find_governor(str_governor);
 		}
+		if (t && !try_module_get(t->owner))
+			t = NULL;
 
 		mutex_unlock(&cpufreq_governor_mutex);
+
+		if (t) {
+			policy->governor = t;
+			return 0;
+		}
 	}
-	return err;
+
+	return -EINVAL;
 }
 
 /**
@@ -760,11 +764,14 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy,
 	if (ret != 1)
 		return -EINVAL;
 
-	if (cpufreq_parse_governor(str_governor, &new_policy.policy,
-						&new_policy.governor))
+	if (cpufreq_parse_governor(str_governor, &new_policy))
 		return -EINVAL;
 
 	ret = cpufreq_set_policy(policy, &new_policy);
+
+	if (new_policy.governor)
+		module_put(new_policy.governor->owner);
+
 	return ret ? ret : count;
 }
 
@@ -1044,8 +1051,7 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy)
 		if (policy->last_policy)
 			new_policy.policy = policy->last_policy;
 		else
-			cpufreq_parse_governor(gov->name, &new_policy.policy,
-					       NULL);
+			cpufreq_parse_governor(gov->name, &new_policy);
 	}
 	/* set default policy */
 	return cpufreq_set_policy(policy, &new_policy);
@@ -2160,7 +2166,6 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
 	mutex_lock(&cpufreq_governor_mutex);
 	list_del(&governor->governor_list);
 	mutex_unlock(&cpufreq_governor_mutex);
-	return;
 }
 EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
 

drivers/cpufreq/longhaul.c

@@ -894,7 +894,7 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
 	if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
 		longhaul_setup_voltagescaling();
 
-	policy->cpuinfo.transition_latency = 200000;	/* nsec */
+	policy->transition_delay_us = 200000;	/* usec */
 
 	return cpufreq_table_validate_and_show(policy, longhaul_table);
 }

drivers/cpufreq/mediatek-cpufreq.c

@@ -574,6 +574,7 @@ static struct platform_driver mtk_cpufreq_platdrv = {
 /* List of machines supported by this driver */
 static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
 	{ .compatible = "mediatek,mt2701", },
+	{ .compatible = "mediatek,mt2712", },
 	{ .compatible = "mediatek,mt7622", },
 	{ .compatible = "mediatek,mt7623", },
 	{ .compatible = "mediatek,mt817x", },

drivers/cpufreq/mvebu-cpufreq.c

@@ -76,12 +76,6 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 			return PTR_ERR(clk);
 		}
 
-		/*
-		 * In case of a failure of dev_pm_opp_add(), we don't
-		 * bother with cleaning up the registered OPP (there's
-		 * no function to do so), and simply cancel the
-		 * registration of the cpufreq device.
-		 */
 		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
 		if (ret) {
 			clk_put(clk);
@@ -91,7 +85,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 		ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
 		if (ret) {
 			clk_put(clk);
-			return ret;
+			dev_err(cpu_dev, "Failed to register OPPs\n");
+			goto opp_register_failed;
 		}
 
 		ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
@@ -99,9 +94,16 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 		if (ret)
 			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
 				__func__, ret);
+		clk_put(clk);
 	}
 
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 	return 0;
+
+opp_register_failed:
+	/* As registering has failed remove all the opp for all cpus */
+	dev_pm_opp_cpumask_remove_table(cpu_possible_mask);
+
+	return ret;
 }
 device_initcall(armada_xp_pmsu_cpufreq_init);

drivers/cpufreq/ti-cpufreq.c

@@ -17,6 +17,7 @@
 #include <linux/cpu.h>
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -50,6 +51,7 @@ struct ti_cpufreq_soc_data {
 	unsigned long efuse_mask;
 	unsigned long efuse_shift;
 	unsigned long rev_offset;
+	bool multi_regulator;
 };
 
 struct ti_cpufreq_data {
@@ -57,6 +59,7 @@ struct ti_cpufreq_data {
 	struct device_node *opp_node;
 	struct regmap *syscon;
 	const struct ti_cpufreq_soc_data *soc_data;
+	struct opp_table *opp_table;
 };
 
 static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
@@ -95,6 +98,7 @@ static struct ti_cpufreq_soc_data am3x_soc_data = {
 	.efuse_offset = 0x07fc,
 	.efuse_mask = 0x1fff,
 	.rev_offset = 0x600,
+	.multi_regulator = false,
 };
 
 static struct ti_cpufreq_soc_data am4x_soc_data = {
@@ -103,6 +107,7 @@ static struct ti_cpufreq_soc_data am4x_soc_data = {
 	.efuse_offset = 0x0610,
 	.efuse_mask = 0x3f,
 	.rev_offset = 0x600,
+	.multi_regulator = false,
 };
 
 static struct ti_cpufreq_soc_data dra7_soc_data = {
@@ -111,6 +116,7 @@ static struct ti_cpufreq_soc_data dra7_soc_data = {
 	.efuse_mask = 0xf80000,
 	.efuse_shift = 19,
 	.rev_offset = 0x204,
+	.multi_regulator = true,
 };
 
 /**
@@ -195,12 +201,14 @@ static const struct of_device_id ti_cpufreq_of_match[] = {
 	{},
 };
 
-static int ti_cpufreq_init(void)
+static int ti_cpufreq_probe(struct platform_device *pdev)
 {
 	u32 version[VERSION_COUNT];
 	struct device_node *np;
 	const struct of_device_id *match;
+	struct opp_table *ti_opp_table;
 	struct ti_cpufreq_data *opp_data;
+	const char * const reg_names[] = {"vdd", "vbb"};
 	int ret;
 
 	np = of_find_node_by_path("/");
@@ -247,16 +255,29 @@ static int ti_cpufreq_init(void)
 	if (ret)
 		goto fail_put_node;
 
-	ret = PTR_ERR_OR_ZERO(dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
-							  version, VERSION_COUNT));
-	if (ret) {
+	ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
+						   version, VERSION_COUNT);
+	if (IS_ERR(ti_opp_table)) {
 		dev_err(opp_data->cpu_dev,
 			"Failed to set supported hardware\n");
+		ret = PTR_ERR(ti_opp_table);
 		goto fail_put_node;
 	}
 
-	of_node_put(opp_data->opp_node);
+	opp_data->opp_table = ti_opp_table;
+
+	if (opp_data->soc_data->multi_regulator) {
+		ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
+							 reg_names,
+							 ARRAY_SIZE(reg_names));
+		if (IS_ERR(ti_opp_table)) {
+			dev_pm_opp_put_supported_hw(opp_data->opp_table);
+			ret =  PTR_ERR(ti_opp_table);
+			goto fail_put_node;
+		}
+	}
 
+	of_node_put(opp_data->opp_node);
 register_cpufreq_dt:
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 
@@ -269,4 +290,22 @@ static int ti_cpufreq_init(void)
 
 	return ret;
 }
-device_initcall(ti_cpufreq_init);
+
+static int ti_cpufreq_init(void)
+{
+	platform_device_register_simple("ti-cpufreq", -1, NULL, 0);
+	return 0;
+}
+module_init(ti_cpufreq_init);
+
+static struct platform_driver ti_cpufreq_driver = {
+	.probe = ti_cpufreq_probe,
+	.driver = {
+		.name = "ti-cpufreq",
+	},
+};
+module_platform_driver(ti_cpufreq_driver);
+
+MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver");
+MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
+MODULE_LICENSE("GPL v2");

drivers/opp/Makefile

@@ -2,3 +2,4 @@ ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
 obj-$(CONFIG_OF)		+= of.o
 obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
+obj-$(CONFIG_ARM_TI_CPUFREQ)	+= ti-opp-supply.o