drm: panel: Add Jadard JD9365DA-H3 DSI panel

Jadard JD9365DA-H3 is WXGA MIPI DSI panel and it support TFT
dot matrix LCD with 800RGBx1280 dots at maximum.

Add support for it.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108173120.618312-4-jagan@edgeble.ai

MAINTAINERS

@@ -6507,6 +6507,7 @@ DRM DRIVER FOR JADARD JD9365DA-H3 MIPI-DSI LCD PANELS
 M:	Jagan Teki <jagan@edgeble.ai>
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
+F:	drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
 
 DRM DRIVER FOR LOGICVC DISPLAY CONTROLLER
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>

drivers/gpu/drm/panel/Kconfig

@@ -203,6 +203,16 @@ config DRM_PANEL_INNOLUX_P079ZCA
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
+config DRM_PANEL_JADARD_JD9365DA_H3
+	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Jadard JD9365DA-H3
+	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
+	  800RGBx1280 dots at maximum.
+
 config DRM_PANEL_JDI_LT070ME05000
 	tristate "JDI LT070ME05000 WUXGA DSI panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
+obj-$(CONFIG_DRM_PANEL_JADARD_JD9365DA_H3) += panel-jadard-jd9365da-h3.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
 obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o