arm64: dts: allwinner: h6: move MMC pinctrl to dtsi

There is only one pinmuxing available for each MMC controller.

Move the pinctrl to the SOC
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -56,8 +56,6 @@ &ehci3 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -104,8 +104,6 @@ &ehci3 {
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
@@ -113,8 +111,6 @@ &mmc0 {
 };
 
 &mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&reg_cldo1>;
 	vqmmc-supply = <&reg_bldo2>;
 	non-removable;

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi

@@ -278,6 +278,8 @@ mmc0: mmc@4020000 {
 			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -306,6 +308,8 @@ mmc2: mmc@4022000 {
 			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;