Skip to content

L
linux
Commit 6be4826e authored by Russell King's avatar Russell King
Browse files
Options

ARM: Integrator: move 16-bit timer support to Integrator/AP 

Only Integrator/AP has 16-bit timers, so move the support into the
Integrator/AP specific support files.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 5a46334a
Hide whitespace changes
Inline Side-by-side
Showing with 155 additions and 163 deletions
arch/arm/mach-integrator/common.h deleted 100644 → 0
View file @ 5a46334a
extern void integrator_time_init(u32, unsigned int);
arch/arm/mach-integrator/core.c
View file @ 6be4826e
......@@ -19,8 +19,6 @@
#include <linux/termios.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/clkdev.h>
......@@ -28,14 +26,11 @@
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/irq.h>
#include <asm/hardware/arm_timer.h>
#include <mach/cm.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
#include "common.h"
static struct amba_pl010_data integrator_uart_data;
static struct amba_device rtc_device = {
......@@ -220,155 +215,3 @@ void cm_control(u32 mask, u32 set)
}
EXPORT_SYMBOL(cm_control);
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
static unsigned long timer_reload;
static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
static cycle_t timersp_read(struct clocksource *cs)
{
return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
}
static struct clocksource clocksource_timersp = {
.name = "timer2",
.rating = 200,
.read = timersp_read,
.mask = CLOCKSOURCE_MASK(16),
.shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void integrator_clocksource_init(u32 khz)
{
struct clocksource *cs = &clocksource_timersp;
void __iomem *base = clksrc_base;
u32 ctrl = TIMER_CTRL_ENABLE;
if (khz >= 1500) {
khz /= 16;
ctrl = TIMER_CTRL_DIV16;
}
writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
cs->mult = clocksource_khz2mult(khz, cs->shift);
clocksource_register(cs);
}
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
/*
* IRQ handler for the timer
*/
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* clear the interrupt */
writel(1, clkevt_base + TIMER_INTCLR);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
{
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
writel(ctrl, clkevt_base + TIMER_CTRL);
writel(timer_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
}
writel(ctrl, clkevt_base + TIMER_CTRL);
}
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
{
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
writel(next, clkevt_base + TIMER_LOAD);
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
return 0;
}
static struct clock_event_device integrator_clockevent = {
.name = "timer1",
.shift = 34,
.features = CLOCK_EVT_FEAT_PERIODIC,
.set_mode = clkevt_set_mode,
.set_next_event = clkevt_set_next_event,
.rating = 300,
.cpumask = cpu_all_mask,
};
static struct irqaction integrator_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = integrator_timer_interrupt,
.dev_id = &integrator_clockevent,
};
static void integrator_clockevent_init(u32 khz, unsigned int ctrl)
{
struct clock_event_device *evt = &integrator_clockevent;
if (khz * 1000 > 0x100000 * HZ) {
khz /= 256;
ctrl |= TIMER_CTRL_DIV256;
} else if (khz * 1000 > 0x10000 * HZ) {
khz /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
timer_reload = khz * 1000 / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
evt->irq = IRQ_TIMERINT1;
evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
clockevents_register_device(evt);
}
/*
* Set up timer(s).
*/
void __init integrator_time_init(u32 khz, unsigned int ctrl)
{
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
integrator_clocksource_init(khz);
integrator_clockevent_init(khz, ctrl);
}
arch/arm/mach-integrator/integrator_ap.c
View file @ 6be4826e
......@@ -27,10 +27,14 @@
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/hardware/arm_timer.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
......@@ -44,8 +48,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "common.h"
/*
* All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
* is the (PA >> 12).
......@@ -335,9 +337,159 @@ static void __init ap_init(void)
}
}
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
static unsigned long timer_reload;
static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
static cycle_t timersp_read(struct clocksource *cs)
{
return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
}
static struct clocksource clocksource_timersp = {
.name = "timer2",
.rating = 200,
.read = timersp_read,
.mask = CLOCKSOURCE_MASK(16),
.shift = 16,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void integrator_clocksource_init(u32 khz)
{
struct clocksource *cs = &clocksource_timersp;
void __iomem *base = clksrc_base;
u32 ctrl = TIMER_CTRL_ENABLE;
if (khz >= 1500) {
khz /= 16;
ctrl = TIMER_CTRL_DIV16;
}
writel(ctrl, base + TIMER_CTRL);
writel(0xffff, base + TIMER_LOAD);
cs->mult = clocksource_khz2mult(khz, cs->shift);
clocksource_register(cs);
}
static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
/*
* IRQ handler for the timer
*/
static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* clear the interrupt */
writel(1, clkevt_base + TIMER_INTCLR);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
{
u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
if (mode == CLOCK_EVT_MODE_PERIODIC) {
writel(ctrl, clkevt_base + TIMER_CTRL);
writel(timer_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
}
writel(ctrl, clkevt_base + TIMER_CTRL);
}
static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
{
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
writel(next, clkevt_base + TIMER_LOAD);
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
return 0;
}
static struct clock_event_device integrator_clockevent = {
.name = "timer1",
.shift = 34,
.features = CLOCK_EVT_FEAT_PERIODIC,
.set_mode = clkevt_set_mode,
.set_next_event = clkevt_set_next_event,
.rating = 300,
.cpumask = cpu_all_mask,
};
static struct irqaction integrator_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = integrator_timer_interrupt,
.dev_id = &integrator_clockevent,
};
static void integrator_clockevent_init(u32 khz)
{
struct clock_event_device *evt = &integrator_clockevent;
unsigned int ctrl = 0;
if (khz * 1000 > 0x100000 * HZ) {
khz /= 256;
ctrl |= TIMER_CTRL_DIV256;
} else if (khz * 1000 > 0x10000 * HZ) {
khz /= 16;
ctrl |= TIMER_CTRL_DIV16;
}
timer_reload = khz * 1000 / HZ;
writel(ctrl, clkevt_base + TIMER_CTRL);
evt->irq = IRQ_TIMERINT1;
evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
clockevents_register_device(evt);
}
/*
* Set up timer(s).
*/
static void __init ap_init_timer(void)
{
integrator_time_init(TICKS_PER_uSEC * 1000, 0);
u32 khz = TICKS_PER_uSEC * 1000;
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
integrator_clocksource_init(khz);
integrator_clockevent_init(khz);
}
static struct sys_timer ap_timer = {
......
arch/arm/mach-integrator/integrator_cp.c
View file @ 6be4826e
......@@ -43,8 +43,6 @@
#include <plat/timer-sp.h>
#include "common.h"
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_FLASH_SIZE SZ_32M
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7