arm64: dts: sdm850: Add OPP tables for 2.84 and 2.96GHz

Running cpufreq-hw driver on Lenovo Yoga C630 laptop, the following
warning messages will be seen.

[    3.415340] cpu cpu4: Voltage update failed freq=2841600
[    3.418755] cpu cpu4: failed to update OPP for freq=2841600
[    3.422949] cpu cpu4: Voltage update failed freq=2956800
[    3.427086] cpu cpu4: failed to update OPP for freq=2956800

This is because the cpufreq-hw lookup table of SDM850 provides these two
set-points, but they are missing from OPP table in DT.  Let's create
sdm850.dtsi to add the OPP for them, so that the warning will be gone.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210112090640.20062-1-shawn.guo@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -13,7 +13,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
-#include "sdm845.dtsi"
+#include "sdm850.dtsi"
 #include "pm8998.dtsi"
 
 / {

arch/arm64/boot/dts/qcom/sdm850.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM850 SoC device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845.dtsi"
+
+&cpu4_opp_table {
+	cpu4_opp33: opp-2841600000 {
+		opp-hz = /bits/ 64 <2841600000>;
+		opp-peak-kBps = <7216000 25497600>;
+	};
+
+	cpu4_opp34: opp-2956800000 {
+		opp-hz = /bits/ 64 <2956800000>;
+		opp-peak-kBps = <7216000 25497600>;
+		turbo-mode;
+	};
+};