Commit 6c266971 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Wim Van Sebroeck

dt-bindings: watchdog: drop duplicated GPIO watchdog bindings

Two conversions to DT schema of GPIO watchdog binding happened and came
through different trees.  Merge them into one:
1. Combine maintainers,
2. Use more descriptive property descriptions and constraints from
   gpio-wdt.yaml,
3. Switch to unevaluatedProperties:false, to allow generic watchdog
   properties.
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230415095112.51257-1-krzysztof.kozlowski@linaro.orgSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@linux-watchdog.org>
parent edb10ace
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/watchdog/gpio-wdt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GPIO controlled watchdog
maintainers:
- Robert Marko <robert.marko@sartura.hr>
properties:
compatible:
const: linux,wdt-gpio
gpios:
maxItems: 1
description: GPIO connected to the WDT reset pin
hw_algo:
$ref: /schemas/types.yaml#/definitions/string
description: Algorithm used by the driver
oneOf:
- description:
Either a high-to-low or a low-to-high transition clears the WDT counter.
The watchdog timer is disabled when GPIO is left floating or connected
to a three-state buffer.
const: toggle
- description:
Low or high level starts counting WDT timeout, the opposite level
disables the WDT.
Active level is determined by the GPIO flags.
const: level
hw_margin_ms:
$ref: /schemas/types.yaml#/definitions/uint32
description: Maximum time to reset watchdog circuit (in milliseconds)
minimum: 2
maximum: 65535
always-running:
type: boolean
description:
If the watchdog timer cannot be disabled, add this flag to have the driver
keep toggling the signal without a client.
It will only cease to toggle the signal when the device is open and the
timeout elapsed.
required:
- compatible
- gpios
- hw_algo
- hw_margin_ms
unevaluatedProperties: false
......@@ -8,6 +8,7 @@ title: GPIO-controlled Watchdog
maintainers:
- Guenter Roeck <linux@roeck-us.net>
- Robert Marko <robert.marko@sartura.hr>
properties:
compatible:
......@@ -19,11 +20,23 @@ properties:
hw_algo:
description: The algorithm used by the driver.
enum: [ level, toggle ]
oneOf:
- description:
Either a high-to-low or a low-to-high transition clears the WDT counter.
The watchdog timer is disabled when GPIO is left floating or connected
to a three-state buffer.
const: toggle
- description:
Low or high level starts counting WDT timeout, the opposite level
disables the WDT.
Active level is determined by the GPIO flags.
const: level
hw_margin_ms:
description: Maximum time to reset watchdog circuit (milliseconds).
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 2
maximum: 65535
always-running:
type: boolean
......@@ -42,7 +55,7 @@ required:
allOf:
- $ref: watchdog.yaml#
additionalProperties: false
unevaluatedProperties: false
examples:
- |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment