Commit 6c38ca03 authored by Chris Morgan's avatar Chris Morgan Committed by Lee Jones

dt-bindings: mfd: rk808: Convert bindings to yaml

Convert the rk808 bindings into yaml format. clock-output-names varies
in maxItems depending on whether or not the clock-cells is 0 or 1. For
the rk805, rk809, and rk817. This preserves behavior with the existing
driver handling setting the clock for these specific PMICs. When this
driver is corrected and the devicetrees updated this logic can be
removed (since the rk805, rk808, and rk817 only have one actual clock).

Note this patch was previously sent as a series, all of the patches in
the series except this one have been committed to mainline.
Signed-off-by: default avatarChris Morgan <macromorgan@hotmail.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com
parent 724c3be3
This diff is collapsed.
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RK805 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD
that includes multiple switchable regulators.
properties:
compatible:
enum:
- rockchip,rk805
reg:
maxItems: 1
interrupts:
maxItems: 1
'#clock-cells':
description:
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
minimum: 0
maximum: 1
clock-output-names:
description:
From common clock binding to override the default output clock name.
gpio-controller: true
'#gpio-cells':
const: 2
rockchip,system-power-controller:
type: boolean
description:
Telling whether or not this PMIC is controlling the system power.
wakeup-source:
type: boolean
description:
Device can be used as a wakeup source.
vcc1-supply:
description:
The input supply for DCDC_REG1.
vcc2-supply:
description:
The input supply for DCDC_REG2.
vcc3-supply:
description:
The input supply for DCDC_REG3.
vcc4-supply:
description:
The input supply for DCDC_REG4.
vcc5-supply:
description:
The input supply for LDO_REG1 and LDO_REG2.
vcc6-supply:
description:
The input supply for LDO_REG3.
regulators:
type: object
patternProperties:
"^(DCDC_REG[1-4]|LDO_REG[1-3])$":
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
allOf:
- if:
properties:
'#clock-cells':
const: 0
then:
properties:
clock-output-names:
maxItems: 1
else:
properties:
clock-output-names:
maxItems: 2
required:
- compatible
- reg
- interrupts
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@18 {
compatible = "rockchip,rk805";
reg = <0x18>;
interrupt-parent = <&gpio2>;
interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vdd_18: LDO_REG1 {
regulator-name = "vdd_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc18_emmc: LDO_REG2 {
regulator-name = "vcc_18emmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_11: LDO_REG3 {
regulator-name = "vdd_11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1100000>;
};
};
};
};
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RK808 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD
that includes regulators, an RTC, and a power button.
properties:
compatible:
enum:
- rockchip,rk808
reg:
maxItems: 1
interrupts:
maxItems: 1
'#clock-cells':
description:
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
const: 1
clock-output-names:
description:
From common clock binding to override the default output clock name.
maxItems: 2
rockchip,system-power-controller:
type: boolean
description:
Telling whether or not this PMIC is controlling the system power.
wakeup-source:
type: boolean
description:
Device can be used as a wakeup source.
vcc1-supply:
description:
The input supply for DCDC_REG1.
vcc2-supply:
description:
The input supply for DCDC_REG2.
vcc3-supply:
description:
The input supply for DCDC_REG3.
vcc4-supply:
description:
The input supply for DCDC_REG4.
vcc6-supply:
description:
The input supply for LDO_REG1 and LDO_REG2.
vcc7-supply:
description:
The input supply for LDO_REG3 and LDO_REG7.
vcc8-supply:
description:
The input supply for SWITCH_REG1.
vcc9-supply:
description:
The input supply for LDO_REG4 and LDO_REG5.
vcc10-supply:
description:
The input supply for LDO_REG6.
vcc11-supply:
description:
The input supply for LDO_REG8.
vcc12-supply:
description:
The input supply for SWITCH_REG2.
vddio-supply:
description:
The input supply for digital IO.
dvs-gpios:
description: |
buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for
2 host gpio's used for dvs. The format of the gpio specifier
depends in the gpio controller. If DVS GPIOs aren't present,
voltage changes will happen very quickly with no slow ramp time.
maxItems: 2
regulators:
type: object
patternProperties:
"^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
rk808: pmic@1b {
compatible = "rockchip,rk808";
clock-output-names = "xin32k", "rk808-clkout2";
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
<&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
vcc8-supply = <&vcc_18>;
vcc9-supply = <&vcc_io>;
vcc10-supply = <&vcc_io>;
vcc12-supply = <&vcc_io>;
vddio-supply = <&vccio_pmu>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd_arm";
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
};
vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
};
vccio_pmu: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_pmu";
};
vcc_tp: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_tp";
};
vdd_10: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
};
vcc18_lcd: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
};
vdd10_lcd: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
};
vcc_18: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
};
vcca_codec: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_codec";
};
vcc_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_wl";
};
vcc_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lcd";
};
};
};
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RK809 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
that includes regulators, an RTC, and power button.
properties:
compatible:
enum:
- rockchip,rk809
reg:
maxItems: 1
interrupts:
maxItems: 1
'#clock-cells':
description: |
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
minimum: 0
maximum: 1
clock-output-names:
description:
From common clock binding to override the default output clock name.
rockchip,system-power-controller:
type: boolean
description:
Telling whether or not this PMIC is controlling the system power.
wakeup-source:
type: boolean
description:
Device can be used as a wakeup source.
vcc1-supply:
description:
The input supply for DCDC_REG1.
vcc2-supply:
description:
The input supply for DCDC_REG2.
vcc3-supply:
description:
The input supply for DCDC_REG3.
vcc4-supply:
description:
The input supply for DCDC_REG4.
vcc5-supply:
description:
The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
vcc6-supply:
description:
The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
vcc7-supply:
description:
The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
vcc8-supply:
description:
The input supply for SWITCH_REG1.
vcc9-supply:
description:
The input supply for DCDC_REG5 and SWITCH_REG2.
regulators:
type: object
patternProperties:
"^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
allOf:
- if:
properties:
'#clock-cells':
const: 0
then:
properties:
clock-output-names:
maxItems: 1
else:
properties:
clock-output-names:
maxItems: 2
required:
- compatible
- reg
- interrupts
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
interrupt-parent = <&gpio3>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l_pin>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sysin>;
vcc2-supply = <&vcc_sysin>;
vcc3-supply = <&vcc_sysin>;
vcc4-supply = <&vcc_sysin>;
vcc6-supply = <&vcc_sysin>;
vcc7-supply = <&vcc_sysin>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc_sysin>;
vcc10-supply = <&vcc_sysin>;
vcc11-supply = <&vcc_sysin>;
vcc12-supply = <&vcc3v3_sys>;
regulators {
vdd_center: DCDC_REG1 {
regulator-name = "vdd_center";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
regulator-name = "vdd_cpu_l";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: vcc_wl: DCDC_REG4 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc1v8_pmupll: LDO_REG3 {
regulator-name = "vcc1v8_pmupll";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcca3v0_codec: LDO_REG5 {
regulator-name = "vcca3v0_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v5: LDO_REG6 {
regulator-name = "vcc_1v5";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1500000>;
};
};
vcca1v8_codec: LDO_REG7 {
regulator-name = "vcca1v8_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v0: LDO_REG8 {
regulator-name = "vcc_3v0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc3v3_s3: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RK817 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
that includes regulators, an RTC, a power button, an audio codec, and a
battery charger manager.
properties:
compatible:
enum:
- rockchip,rk817
reg:
maxItems: 1
interrupts:
maxItems: 1
'#clock-cells':
description:
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
minimum: 0
maximum: 1
clock-output-names:
description:
From common clock binding to override the default output clock name.
rockchip,system-power-controller:
type: boolean
description:
Telling whether or not this PMIC is controlling the system power.
wakeup-source:
type: boolean
description:
Device can be used as a wakeup source.
vcc1-supply:
description:
The input supply for DCDC_REG1.
vcc2-supply:
description:
The input supply for DCDC_REG2.
vcc3-supply:
description:
The input supply for DCDC_REG3.
vcc4-supply:
description:
The input supply for DCDC_REG4.
vcc5-supply:
description:
The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
vcc6-supply:
description:
The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
vcc7-supply:
description:
The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
vcc8-supply:
description:
The input supply for BOOST.
vcc9-supply:
description:
The input supply for OTG_SWITCH.
regulators:
type: object
patternProperties:
"^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
clocks:
description:
The input clock for the audio codec.
clock-names:
description:
The clock name for the codec clock.
items:
- const: mclk
'#sound-dai-cells':
description:
Needed for the interpretation of sound dais.
const: 0
codec:
description: |
The child node for the codec to hold additional properties. If no
additional properties are required for the codec, this node can be
omitted.
type: object
properties:
rockchip,mic-in-differential:
type: boolean
description:
Describes if the microphone uses differential mode.
allOf:
- if:
properties:
'#clock-cells':
const: 0
then:
properties:
clock-output-names:
maxItems: 1
else:
properties:
clock-output-names:
maxItems: 2
required:
- compatible
- reg
- interrupts
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/px30-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
rk817: pmic@20 {
compatible = "rockchip,rk817";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
clock-output-names = "rk808-clkout1", "xin32k";
clock-names = "mclk";
clocks = <&cru SCLK_I2S1_OUT>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
wakeup-source;
#clock-cells = <1>;
#sound-dai-cells = <0>;
vcc1-supply = <&vccsys>;
vcc2-supply = <&vccsys>;
vcc3-supply = <&vccsys>;
vcc4-supply = <&vccsys>;
vcc5-supply = <&vccsys>;
vcc6-supply = <&vccsys>;
vcc7-supply = <&vccsys>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vdd_arm: DCDC_REG2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <950000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_3v3: DCDC_REG4 {
regulator-name = "vcc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_1v8: LDO_REG2 {
regulator-name = "vcc_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_1v0: LDO_REG3 {
regulator-name = "vdd_1v0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc3v3_pmu: LDO_REG4 {
regulator-name = "vcc3v3_pmu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_sd: LDO_REG6 {
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_bl: LDO_REG7 {
regulator-name = "vcc_bl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_lcd: LDO_REG8 {
regulator-name = "vcc_lcd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <2800000>;
};
};
vcc_cam: LDO_REG9 {
regulator-name = "vcc_cam";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
};
rk817_codec: codec {
rockchip,mic-in-differential;
};
};
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RK818 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD
that includes regulators, an RTC, and a power button.
properties:
compatible:
enum:
- rockchip,rk818
reg:
maxItems: 1
interrupts:
maxItems: 1
'#clock-cells':
description: |
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
const: 1
clock-output-names:
description:
From common clock binding to override the default output clock name.
maxItems: 2
rockchip,system-power-controller:
type: boolean
description:
Telling whether or not this PMIC is controlling the system power.
wakeup-source:
type: boolean
description:
Device can be used as a wakeup source.
vcc1-supply:
description:
The input supply for DCDC_REG1.
vcc2-supply:
description:
The input supply for DCDC_REG2.
vcc3-supply:
description:
The input supply for DCDC_REG3.
vcc4-supply:
description:
The input supply for DCDC_REG4.
boost-supply:
description:
The input supply for DCDC_BOOST
vcc6-supply:
description:
The input supply for LDO_REG1 and LDO_REG2.
vcc7-supply:
description:
The input supply for LDO_REG3, LDO_REG5, and LDO_REG7.
vcc8-supply:
description:
The input supply for LDO_REG4, LDO_REG6, and LDO_REG8.
vcc9-supply:
description:
The input supply for LDO_REG9 and SWITCH_REG.
vddio-supply:
description:
The input supply for digital IO.
h_5v-supply:
description:
The input supply for HDMI_SWITCH.
usb-supply:
description:
The input supply for OTG_SWITCH.
regulators:
type: object
patternProperties:
"^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
type: object
$ref: ../regulator/regulator.yaml#
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/px30-cru.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
rk818: pmic@1c {
compatible = "rockchip,rk818";
reg = <0x1c>;
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
vcc1-supply = <&vdd_sys>;
vcc2-supply = <&vdd_sys>;
vcc3-supply = <&vdd_sys>;
vcc4-supply = <&vdd_sys>;
boost-supply = <&vdd_in_otg_out>;
vcc6-supply = <&vdd_sys>;
vcc7-supply = <&vdd_misc_1v8>;
vcc8-supply = <&vdd_misc_1v8>;
vcc9-supply = <&vdd_3v3_io>;
vddio-supply = <&vdd_3v3_io>;
regulators {
vdd_log: DCDC_REG1 {
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1250000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_3v3_io: DCDC_REG4 {
regulator-name = "vdd_3v3_io";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vdd_sys: DCDC_BOOST {
regulator-name = "vdd_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <5000000>;
};
};
vdd_sd: SWITCH_REG {
regulator-name = "vdd_sd";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_eth_2v5: LDO_REG2 {
regulator-name = "vdd_eth_2v5";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2500000>;
};
};
vdd_1v0: LDO_REG3 {
regulator-name = "vdd_1v0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vdd_1v8_lcd_ldo: LDO_REG4 {
regulator-name = "vdd_1v8_lcd_ldo";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_1v0_lcd: LDO_REG6 {
regulator-name = "vdd_1v0_lcd";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vdd_1v8_ldo: LDO_REG7 {
regulator-name = "vdd_1v8_ldo";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_io_sd: LDO_REG9 {
regulator-name = "vdd_io_sd";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment