x86/mm: Split read_cr3() into read_cr3_pa() and __read_cr3()

The kernel has several code paths that read CR3.  Most of them assume that
CR3 contains the PGD's physical address, whereas some of them awkwardly
use PHYSICAL_PAGE_MASK to mask off low bits.

Add explicit mask macros for CR3 and convert all of the CR3 readers.
This will keep them from breaking when PCID is enabled.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: xen-devel <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/883f8fb121f4616c1c1427ad87350bb2f5ffeca1.1497288170.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/boot/compressed/pagetable.c

@@ -92,7 +92,7 @@ void initialize_identity_maps(void)
 	 * and we must append to the existing area instead of entirely
 	 * overwriting it.
 	 */
-	level4p = read_cr3();
+	level4p = read_cr3_pa();
 	if (level4p == (unsigned long)_pgtable) {
 		debug_putstr("booted via startup_32()\n");
 		pgt_data.pgt_buf = _pgtable + BOOT_INIT_PGT_SIZE;

arch/x86/include/asm/efi.h

@@ -74,7 +74,7 @@ struct efi_scratch {
 	__kernel_fpu_begin();						\
 									\
 	if (efi_scratch.use_pgd) {					\
-		efi_scratch.prev_cr3 = read_cr3();			\
+		efi_scratch.prev_cr3 = __read_cr3();			\
 		write_cr3((unsigned long)efi_scratch.efi_pgt);		\
 		__flush_tlb_all();					\
 	}								\

arch/x86/include/asm/mmu_context.h

@@ -269,7 +269,7 @@ static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 
 /*
  * This can be used from process context to figure out what the value of
- * CR3 is without needing to do a (slow) read_cr3().
+ * CR3 is without needing to do a (slow) __read_cr3().
  *
  * It's intended to be used for code like KVM that sneakily changes CR3
  * and needs to restore it.  It needs to be used very carefully.
@@ -281,7 +281,7 @@ static inline unsigned long __get_current_cr3_fast(void)
 	/* For now, be very restrictive about when this can be called. */
 	VM_WARN_ON(in_nmi() || !in_atomic());
 
-	VM_BUG_ON(cr3 != read_cr3());
+	VM_BUG_ON(cr3 != __read_cr3());
 	return cr3;
 }
 

arch/x86/include/asm/paravirt.h

@@ -61,7 +61,7 @@ static inline void write_cr2(unsigned long x)
 	PVOP_VCALL1(pv_mmu_ops.write_cr2, x);
 }
 
-static inline unsigned long read_cr3(void)
+static inline unsigned long __read_cr3(void)
 {
 	return PVOP_CALL0(unsigned long, pv_mmu_ops.read_cr3);
 }

arch/x86/include/asm/processor-flags.h

@@ -8,4 +8,40 @@
 #else
 #define X86_VM_MASK	0 /* No VM86 support */
 #endif
+
+/*
+ * CR3's layout varies depending on several things.
+ *
+ * If CR4.PCIDE is set (64-bit only), then CR3[11:0] is the address space ID.
+ * If PAE is enabled, then CR3[11:5] is part of the PDPT address
+ * (i.e. it's 32-byte aligned, not page-aligned) and CR3[4:0] is ignored.
+ * Otherwise (non-PAE, non-PCID), CR3[3] is PWT, CR3[4] is PCD, and
+ * CR3[2:0] and CR3[11:5] are ignored.
+ *
+ * In all cases, Linux puts zeros in the low ignored bits and in PWT and PCD.
+ *
+ * CR3[63] is always read as zero.  If CR4.PCIDE is set, then CR3[63] may be
+ * written as 1 to prevent the write to CR3 from flushing the TLB.
+ *
+ * On systems with SME, one bit (in a variable position!) is stolen to indicate
+ * that the top-level paging structure is encrypted.
+ *
+ * All of the remaining bits indicate the physical address of the top-level
+ * paging structure.
+ *
+ * CR3_ADDR_MASK is the mask used by read_cr3_pa().
+ */
+#ifdef CONFIG_X86_64
+/* Mask off the address space ID bits. */
+#define CR3_ADDR_MASK 0x7FFFFFFFFFFFF000ull
+#define CR3_PCID_MASK 0xFFFull
+#else
+/*
+ * CR3_ADDR_MASK needs at least bits 31:5 set on PAE systems, and we save
+ * a tiny bit of code size by setting all the bits.
+ */
+#define CR3_ADDR_MASK 0xFFFFFFFFull
+#define CR3_PCID_MASK 0ull
+#endif
+
 #endif /* _ASM_X86_PROCESSOR_FLAGS_H */

arch/x86/include/asm/processor.h

@@ -231,6 +231,14 @@ native_cpuid_reg(ebx)
 native_cpuid_reg(ecx)
 native_cpuid_reg(edx)
 
+/*
+ * Friendlier CR3 helpers.
+ */
+static inline unsigned long read_cr3_pa(void)
+{
+	return __read_cr3() & CR3_ADDR_MASK;
+}
+
 static inline void load_cr3(pgd_t *pgdir)
 {
 	write_cr3(__pa(pgdir));

arch/x86/include/asm/special_insns.h

@@ -39,7 +39,7 @@ static inline void native_write_cr2(unsigned long val)
 	asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
 }
 
-static inline unsigned long native_read_cr3(void)
+static inline unsigned long __native_read_cr3(void)
 {
 	unsigned long val;
 	asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
@@ -159,9 +159,13 @@ static inline void write_cr2(unsigned long x)
 	native_write_cr2(x);
 }
 
-static inline unsigned long read_cr3(void)
+/*
+ * Careful!  CR3 contains more than just an address.  You probably want
+ * read_cr3_pa() instead.
+ */
+static inline unsigned long __read_cr3(void)
 {
-	return native_read_cr3();
+	return __native_read_cr3();
 }
 
 static inline void write_cr3(unsigned long x)

arch/x86/include/asm/tlbflush.h

@@ -156,7 +156,7 @@ static inline void __native_flush_tlb(void)
 	 * back:
 	 */
 	preempt_disable();
-	native_write_cr3(native_read_cr3());
+	native_write_cr3(__native_read_cr3());
 	preempt_enable();
 }
 
@@ -264,7 +264,7 @@ static inline void reset_lazy_tlbstate(void)
 	this_cpu_write(cpu_tlbstate.state, 0);
 	this_cpu_write(cpu_tlbstate.loaded_mm, &init_mm);
 
-	WARN_ON(read_cr3() != __pa_symbol(swapper_pg_dir));
+	WARN_ON(read_cr3_pa() != __pa_symbol(swapper_pg_dir));
 }
 
 static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,

arch/x86/kernel/head64.c

@@ -55,7 +55,8 @@ int __init early_make_pgtable(unsigned long address)
 	pmdval_t pmd, *pmd_p;
 
 	/* Invalid address or early pgt is done ?  */
-	if (physaddr >= MAXMEM || read_cr3() != __pa_nodebug(early_level4_pgt))
+	if (physaddr >= MAXMEM ||
+	    read_cr3_pa() != __pa_nodebug(early_level4_pgt))
 		return -1;
 
 again:

arch/x86/kernel/paravirt.c

@@ -391,7 +391,7 @@ struct pv_mmu_ops pv_mmu_ops __ro_after_init = {
 
 	.read_cr2 = native_read_cr2,
 	.write_cr2 = native_write_cr2,
-	.read_cr3 = native_read_cr3,
+	.read_cr3 = __native_read_cr3,
 	.write_cr3 = native_write_cr3,
 
 	.flush_tlb_user = native_flush_tlb,

arch/x86/kernel/process_32.c

@@ -92,7 +92,7 @@ void __show_regs(struct pt_regs *regs, int all)
 
 	cr0 = read_cr0();
 	cr2 = read_cr2();
-	cr3 = read_cr3();
+	cr3 = __read_cr3();
 	cr4 = __read_cr4();
 	printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
 			cr0, cr2, cr3, cr4);

arch/x86/kernel/process_64.c

@@ -104,7 +104,7 @@ void __show_regs(struct pt_regs *regs, int all)
 
 	cr0 = read_cr0();
 	cr2 = read_cr2();
-	cr3 = read_cr3();
+	cr3 = __read_cr3();
 	cr4 = __read_cr4();
 
 	printk(KERN_DEFAULT "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",

arch/x86/kvm/vmx.c

@@ -5024,7 +5024,7 @@ static void vmx_set_constant_host_state(struct vcpu_vmx *vmx)
 	 * Save the most likely value for this task's CR3 in the VMCS.
 	 * We can't use __get_current_cr3_fast() because we're not atomic.
 	 */
-	cr3 = read_cr3();
+	cr3 = __read_cr3();
 	vmcs_writel(HOST_CR3, cr3);		/* 22.2.3  FIXME: shadow tables */
 	vmx->host_state.vmcs_host_cr3 = cr3;
 

arch/x86/mm/fault.c

@@ -346,7 +346,7 @@ static noinline int vmalloc_fault(unsigned long address)
 	 * Do _not_ use "current" here. We might be inside
 	 * an interrupt in the middle of a task switch..
 	 */
-	pgd_paddr = read_cr3();
+	pgd_paddr = read_cr3_pa();
 	pmd_k = vmalloc_sync_one(__va(pgd_paddr), address);
 	if (!pmd_k)
 		return -1;
@@ -388,7 +388,7 @@ static bool low_pfn(unsigned long pfn)
 
 static void dump_pagetable(unsigned long address)
 {
-	pgd_t *base = __va(read_cr3());
+	pgd_t *base = __va(read_cr3_pa());
 	pgd_t *pgd = &base[pgd_index(address)];
 	p4d_t *p4d;
 	pud_t *pud;
@@ -451,7 +451,7 @@ static noinline int vmalloc_fault(unsigned long address)
 	 * happen within a race in page table update. In the later
 	 * case just flush:
 	 */
-	pgd = (pgd_t *)__va(read_cr3()) + pgd_index(address);
+	pgd = (pgd_t *)__va(read_cr3_pa()) + pgd_index(address);
 	pgd_ref = pgd_offset_k(address);
 	if (pgd_none(*pgd_ref))
 		return -1;
@@ -555,7 +555,7 @@ static int bad_address(void *p)
 
 static void dump_pagetable(unsigned long address)
 {
-	pgd_t *base = __va(read_cr3() & PHYSICAL_PAGE_MASK);
+	pgd_t *base = __va(read_cr3_pa());
 	pgd_t *pgd = base + pgd_index(address);
 	p4d_t *p4d;
 	pud_t *pud;
@@ -700,7 +700,7 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code,
 		pgd_t *pgd;
 		pte_t *pte;
 
-		pgd = __va(read_cr3() & PHYSICAL_PAGE_MASK);
+		pgd = __va(read_cr3_pa());
 		pgd += pgd_index(address);
 
 		pte = lookup_address_in_pgd(pgd, address, &level);

arch/x86/mm/ioremap.c

@@ -424,7 +424,7 @@ static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] __page_aligned_bss;
 static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
 {
 	/* Don't assume we're using swapper_pg_dir at this point */
-	pgd_t *base = __va(read_cr3());
+	pgd_t *base = __va(read_cr3_pa());
 	pgd_t *pgd = &base[pgd_index(addr)];
 	p4d_t *p4d = p4d_offset(pgd, addr);
 	pud_t *pud = pud_offset(p4d, addr);

arch/x86/platform/efi/efi_64.c

@@ -80,7 +80,7 @@ pgd_t * __init efi_call_phys_prolog(void)
 	int n_pgds, i, j;
 
 	if (!efi_enabled(EFI_OLD_MEMMAP)) {
-		save_pgd = (pgd_t *)read_cr3();
+		save_pgd = (pgd_t *)__read_cr3();
 		write_cr3((unsigned long)efi_scratch.efi_pgt);
 		goto out;
 	}
@@ -646,7 +646,7 @@ efi_status_t efi_thunk_set_virtual_address_map(
 	efi_sync_low_kernel_mappings();
 	local_irq_save(flags);
 
-	efi_scratch.prev_cr3 = read_cr3();
+	efi_scratch.prev_cr3 = __read_cr3();
 	write_cr3((unsigned long)efi_scratch.efi_pgt);
 	__flush_tlb_all();
 

arch/x86/platform/olpc/olpc-xo1-pm.c

@@ -77,7 +77,7 @@ static int xo1_power_state_enter(suspend_state_t pm_state)
 
 asmlinkage __visible int xo1_do_sleep(u8 sleep_state)
 {
-	void *pgd_addr = __va(read_cr3());
+	void *pgd_addr = __va(read_cr3_pa());
 
 	/* Program wakeup mask (using dword access to CS5536_PM1_EN) */
 	outl(wakeup_mask << 16, acpi_base + CS5536_PM1_STS);

arch/x86/power/cpu.c

@@ -129,7 +129,7 @@ static void __save_processor_state(struct saved_context *ctxt)
 	 */
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
-	ctxt->cr3 = read_cr3();
+	ctxt->cr3 = __read_cr3();
 	ctxt->cr4 = __read_cr4();
 #ifdef CONFIG_X86_64
 	ctxt->cr8 = read_cr8();

arch/x86/power/hibernate_64.c

@@ -150,7 +150,8 @@ static int relocate_restore_code(void)
 	memcpy((void *)relocated_restore_code, &core_restore_code, PAGE_SIZE);
 
 	/* Make the page containing the relocated code executable */
-	pgd = (pgd_t *)__va(read_cr3()) + pgd_index(relocated_restore_code);
+	pgd = (pgd_t *)__va(read_cr3_pa()) +
+		pgd_index(relocated_restore_code);
 	p4d = p4d_offset(pgd, relocated_restore_code);
 	if (p4d_large(*p4d)) {
 		set_p4d(p4d, __p4d(p4d_val(*p4d) & ~_PAGE_NX));

arch/x86/xen/mmu_pv.c

@@ -2017,7 +2017,7 @@ static phys_addr_t __init xen_early_virt_to_phys(unsigned long vaddr)
 	pmd_t pmd;
 	pte_t pte;
 
-	pa = read_cr3();
+	pa = read_cr3_pa();
 	pgd = native_make_pgd(xen_read_phys_ulong(pa + pgd_index(vaddr) *
 						       sizeof(pgd)));
 	if (!pgd_present(pgd))
@@ -2097,7 +2097,7 @@ void __init xen_relocate_p2m(void)
 	pt_phys = pmd_phys + PFN_PHYS(n_pmd);
 	p2m_pfn = PFN_DOWN(pt_phys) + n_pt;
 
-	pgd = __va(read_cr3());
+	pgd = __va(read_cr3_pa());
 	new_p2m = (unsigned long *)(2 * PGDIR_SIZE);
 	idx_p4d = 0;
 	save_pud = n_pud;
@@ -2204,7 +2204,7 @@ static void __init xen_write_cr3_init(unsigned long cr3)
 {
 	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
 
-	BUG_ON(read_cr3() != __pa(initial_page_table));
+	BUG_ON(read_cr3_pa() != __pa(initial_page_table));
 	BUG_ON(cr3 != __pa(swapper_pg_dir));
 
 	/*