net/mlx5: Update dead links in Kconfig documentation

Point to NVIDIA documentation for device specific information now that the
Mellanox documentation site is deprecated. Refer to kernel documentation
sources for generic information not specific to mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Documentation/networking/device_drivers/ethernet/mellanox/mlx5/kconfig.rst

@@ -36,7 +36,7 @@ Enabling the driver and kconfig options
 
 **CONFIG_MLX5_CORE_EN_DCB=(y/n)**:
 
-|    Enables `Data Center Bridging (DCB) Support <https://community.mellanox.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_.
+|    Enables `Data Center Bridging (DCB) Support <https://enterprise-support.nvidia.com/s/article/howto-auto-config-pfc-and-ets-on-connectx-4-via-lldp-dcbx>`_.
 
 
 **CONFIG_MLX5_CORE_IPOIB=(y/n)**
@@ -59,12 +59,12 @@ Enabling the driver and kconfig options
 **CONFIG_MLX5_EN_ARFS=(y/n)**
 
 |    Enables Hardware-accelerated receive flow steering (arfs) support, and ntuple filtering.
-|    https://community.mellanox.com/s/article/howto-configure-arfs-on-connectx-4
+|    https://enterprise-support.nvidia.com/s/article/howto-configure-arfs-on-connectx-4
 
 
 **CONFIG_MLX5_EN_IPSEC=(y/n)**
 
-|    Enables `IPSec XFRM cryptography-offload acceleration <https://support.mellanox.com/s/article/ConnectX-6DX-Bluefield-2-IPsec-HW-Full-Offload-Configuration-Guide>`_.
+|    Enables :ref:`IPSec XFRM cryptography-offload acceleration <xfrm_device>`.
 
 
 **CONFIG_MLX5_EN_MACSEC=(y/n)**
@@ -87,8 +87,8 @@ Enabling the driver and kconfig options
 
 |    Ethernet SRIOV E-Switch support in ConnectX NIC. E-Switch provides internal SRIOV packet steering
 |    and switching for the enabled VFs and PF in two available modes:
-|           1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://community.mellanox.com/s/article/howto-configure-sr-iov-for-connectx-4-connectx-5-with-kvm--ethernet-x>`_.
-|           2) `Switchdev mode (eswitch offloads) <https://www.mellanox.com/related-docs/prod_software/ASAP2_Hardware_Offloading_for_vSwitches_User_Manual_v4.4.pdf>`_.
+|           1) `Legacy SRIOV mode (L2 mac vlan steering based) <https://enterprise-support.nvidia.com/s/article/HowTo-Configure-SR-IOV-for-ConnectX-4-ConnectX-5-ConnectX-6-with-KVM-Ethernet>`_.
+|           2) :ref:`Switchdev mode (eswitch offloads) <switchdev>`.
 
 
 **CONFIG_MLX5_FPGA=(y/n)**
@@ -101,13 +101,13 @@ Enabling the driver and kconfig options
 
 **CONFIG_MLX5_INFINIBAND=(y/n/m)** (module mlx5_ib.ko)
 
-|    Provides low-level InfiniBand/RDMA and `RoCE <https://community.mellanox.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support.
+|    Provides low-level InfiniBand/RDMA and `RoCE <https://enterprise-support.nvidia.com/s/article/recommended-network-configuration-examples-for-roce-deployment>`_ support.
 
 
 **CONFIG_MLX5_MPFS=(y/n)**
 
 |    Ethernet Multi-Physical Function Switch (MPFS) support in ConnectX NIC.
-|    MPFs is required for when `Multi-Host <http://www.mellanox.com/page/multihost>`_ configuration is enabled to allow passing
+|    MPFs is required for when `Multi-Host <https://www.nvidia.com/en-us/networking/multi-host/>`_ configuration is enabled to allow passing
 |    user configured unicast MAC addresses to the requesting PF.
 
 

Documentation/networking/xfrm_device.rst

 .. SPDX-License-Identifier: GPL-2.0
+.. _xfrm_device:
 
 ===============================================
 XFRM device - offloading the IPsec computations