Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

Freescale updates from Scott:

"Highlights include 8xx breakpoints and perf, t1042rdb display support,
and board updates."

arch/powerpc/Kconfig

@@ -115,7 +115,7 @@ config PPC
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select SPARSE_IRQ
 	select IRQ_DOMAIN

arch/powerpc/boot/dts/fsl/kmcent2.dts

+/*
+ * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
+ *
+ * (C) Copyright 2016
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+
+/ {
+	model = "keymile,kmcent2";
+	compatible = "keymile,kmcent2";
+
+	aliases {
+		front_phy = &front_phy;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x04000000
+			  1 0 0xf 0xfa000000 0x00010000
+			  2 0 0xf 0xfb000000 0x00010000
+			  4 0 0xf 0xc0000000 0x08000000
+			  6 0 0xf 0xd0000000 0x08000000
+			  7 0 0xf 0xd8000000 0x08000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x04000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		board-control@2,0 {
+			compatible = "keymile,qriox";
+			reg = <0x2 0x0 0x80>;
+		};
+
+		chassis-mgmt@6,0 {
+			compatible = "keymile,bfticu";
+			reg = <6 0 0x100>;
+			interrupt-controller;
+			interrupt-parent = <&mpic>;
+			interrupts = <11 1 0 0>;
+			#interrupt-cells = <1>;
+		};
+
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			network-clock@1 {
+				compatible = "zarlink,zl30364";
+				reg = <1>;
+				spi-max-frequency = <1000000>;
+			};
+		};
+
+		sdhc@114000 {
+			status = "disabled";
+		};
+
+		i2c@118000 {
+			clock-frequency = <100000>;
+
+			mux@70 {
+				compatible = "nxp,pca9547";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					eeprom@54 {
+						compatible = "24c02";
+						reg = <0x54>;
+						pagesize = <2>;
+						read-only;
+						label = "ddr3-spd";
+					};
+				};
+
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					temp-sensor@48 {
+						compatible = "national,lm75";
+						reg = <0x48>;
+						label = "SENSOR_0";
+					};
+					temp-sensor@4a {
+						compatible = "national,lm75";
+						reg = <0x4a>;
+						label = "SENSOR_2";
+					};
+					temp-sensor@4b {
+						compatible = "national,lm75";
+						reg = <0x4b>;
+						label = "SENSOR_3";
+					};
+				};
+			};
+		};
+
+		i2c@118100 {
+			clock-frequency = <100000>;
+
+			eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				pagesize = <16>;
+			};
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		serial2: serial@11d500 {
+			status = "disabled";
+		};
+
+		serial3: serial@11d600 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		display@180000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+		sata@221000 {
+			status = "disabled";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+
+			ethernet@e6000 {
+				status = "disabled";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&front_phy>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				front_phy: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+	};
+
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe260000 {
+		status = "disabled";
+	};
+
+	pci3: pcie@ffe270000 {
+		status = "disabled";
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			device_type = "hdlc";
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk9";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,siram-entry-id = <0>;
+		};
+	};
+};
+
+#include "t1040si-post.dtsi"

arch/powerpc/boot/dts/fsl/kmcoge4.dts

@@ -83,6 +83,10 @@ flash@2 {
 			};
 		};
 
+		sdhc@114000 {
+			status = "disabled";
+		};
+
 		i2c@119000 {
 			status = "disabled";
 		};

arch/powerpc/configs/85xx/kmp204x_defconfig

-CONFIG_PPC_85xx=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_CORENET_GENERIC=y
-CONFIG_MPIC_MSGR=y
-CONFIG_HIGHMEM=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_KEXEC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_LOWMEM_SIZE_BOOL=y
-CONFIG_LOWMEM_SIZE=0x20000000
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_STATISTICS=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_MULTIQ=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_U32=y
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_FLOW=y
-CONFIG_NET_CLS_CGROUP=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_PHRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=2048
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_XGMAC_MDIO=y
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_NET_VENDOR_XILINX is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_PPC_EPAPR_HV_BYTECHAN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_PTP_1588_CLOCK=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_UIO=y
-CONFIG_STAGING=y
-CONFIG_CLK_QORIQ=y
-CONFIG_EXT2_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_ITU_T=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_RCU_TRACE=y
-CONFIG_UPROBE_EVENT=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM=y

arch/powerpc/include/asm/ppc_asm.h

@@ -505,7 +505,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define MTMSRD(r)	mtmsrd	r
 #define MTMSR_EERI(reg)	mtmsrd	reg,1
 #else
-#define FIX_SRR1(ra, rb)
 #ifndef CONFIG_40x
 #define	RFI		rfi
 #else

arch/powerpc/include/asm/processor.h

@@ -225,6 +225,7 @@ struct thread_struct {
 #ifdef CONFIG_PPC64
 	unsigned long	start_tb;	/* Start purr when proc switched in */
 	unsigned long	accum_tb;	/* Total accumulated purr for process */
+#endif
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	struct perf_event *ptrace_bps[HBP_NUM];
 	/*
@@ -233,7 +234,6 @@ struct thread_struct {
 	 */
 	struct perf_event *last_hit_ubp;
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif
 	struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */
 	unsigned long	trap_nr;	/* last trap # on this thread */
 	u8 load_fp;

arch/powerpc/include/asm/reg.h

@@ -552,7 +552,9 @@
 #define SPRN_IBAT7U	0x236		/* Instruction BAT 7 Upper Register */
 #define SPRN_ICMP	0x3D5		/* Instruction TLB Compare Register */
 #define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
+#ifndef SPRN_ICTRL
 #define SPRN_ICTRL	0x3F3	/* 1011 7450 icache and interrupt ctrl */
+#endif
 #define ICTRL_EICE	0x08000000	/* enable icache parity errs */
 #define ICTRL_EDC	0x04000000	/* enable dcache parity errs */
 #define ICTRL_EICP	0x00000100	/* enable icache par. check */

arch/powerpc/include/asm/reg_8xx.h

@@ -28,6 +28,17 @@
 /* Special MSR manipulation registers */
 #define SPRN_EIE	80	/* External interrupt enable (EE=1, RI=1) */
 #define SPRN_EID	81	/* External interrupt disable (EE=0, RI=1) */
+#define SPRN_NRI	82	/* Non recoverable interrupt (EE=0, RI=0) */
+
+/* Debug registers */
+#define SPRN_CMPA	144
+#define SPRN_COUNTA	150
+#define SPRN_CMPE	152
+#define SPRN_CMPF	153
+#define SPRN_LCTRL1	156
+#define SPRN_LCTRL2	157
+#define SPRN_ICTRL	158
+#define SPRN_BAR	159
 
 /* Commands.  Only the first few are available to the instruction cache.
 */

arch/powerpc/kernel/entry_32.S

@@ -205,6 +205,9 @@ transfer_to_handler_cont:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	mtspr	SPRN_NRI, r0
+#endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	lis	r12,reenable_mmu@h
 	ori	r12,r12,reenable_mmu@l
@@ -292,7 +295,9 @@ stack_ovf:
 	lis	r9,StackOverflow@ha
 	addi	r9,r9,StackOverflow@l
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	FIX_SRR1(r10,r12)
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	mtspr	SPRN_NRI, r0
+#endif
 	mtspr	SPRN_SRR0,r9
 	mtspr	SPRN_SRR1,r10
 	SYNC
@@ -417,9 +422,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	mtlr	r4
 	mtcr	r5
 	lwz	r7,_NIP(r1)
-	FIX_SRR1(r8, r0)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	mtspr	SPRN_NRI, r0
+#endif
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r8
 	SYNC
@@ -703,6 +710,9 @@ fast_exception_return:
 	lwz	r10,_LINK(r11)
 	mtlr	r10
 	REST_GPR(10, r11)
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	mtspr	SPRN_NRI, r0
+#endif
 	mtspr	SPRN_SRR1,r9
 	mtspr	SPRN_SRR0,r12
 	REST_GPR(9, r11)
@@ -951,7 +961,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	.globl exc_exit_restart
 exc_exit_restart:
 	lwz	r12,_NIP(r1)
-	FIX_SRR1(r9,r10)
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	mtspr	SPRN_NRI, r0
+#endif
 	mtspr	SPRN_SRR0,r12
 	mtspr	SPRN_SRR1,r9
 	REST_4GPRS(9, r1)
@@ -1294,7 +1306,6 @@ _GLOBAL(enter_rtas)
 1:	tophys(r9,r1)
 	lwz	r8,INT_FRAME_SIZE+4(r9)	/* get return address */
 	lwz	r9,8(r9)	/* original msr value */
-	FIX_SRR1(r9,r0)
 	addi	r1,r1,INT_FRAME_SIZE
 	li	r0,0
 	mtspr	SPRN_SPRG_RTAS,r0

arch/powerpc/kernel/head_32.S

@@ -869,7 +869,6 @@ __secondary_start:
 
 	/* enable MMU and jump to start_secondary */
 	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
 	lis	r3,start_secondary@h
 	ori	r3,r3,start_secondary@l
 	mtspr	SPRN_SRR0,r3
@@ -977,7 +976,6 @@ start_here:
 	ori	r4,r4,2f@l
 	tophys(r4,r4)
 	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	FIX_SRR1(r3,r5)
 	mtspr	SPRN_SRR0,r4
 	mtspr	SPRN_SRR1,r3
 	SYNC
@@ -1001,7 +999,6 @@ start_here:
 
 /* Now turn on the MMU for real! */
 	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
 	lis	r3,start_kernel@h
 	ori	r3,r3,start_kernel@l
 	mtspr	SPRN_SRR0,r3

arch/powerpc/kernel/head_8xx.S

@@ -329,6 +329,12 @@ InstructionTLBMiss:
 	mtspr	SPRN_SPRG_SCRATCH2, r3
 #endif
 	EXCEPTION_PROLOG_0
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	lis	r10, (itlb_miss_counter - PAGE_OFFSET)@ha
+	lwz	r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10)
+	addi	r11, r11, 1
+	stw	r11, (itlb_miss_counter - PAGE_OFFSET)@l(r10)
+#endif
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
@@ -429,6 +435,12 @@ InstructionTLBMiss:
 DataStoreTLBMiss:
 	mtspr	SPRN_SPRG_SCRATCH2, r3
 	EXCEPTION_PROLOG_0
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	lis	r10, (dtlb_miss_counter - PAGE_OFFSET)@ha
+	lwz	r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10)
+	addi	r11, r11, 1
+	stw	r11, (dtlb_miss_counter - PAGE_OFFSET)@l(r10)
+#endif
 	mfcr	r3
 
 	/* If we are faulting a kernel address, we have to use the
@@ -561,6 +573,7 @@ InstructionTLBError:
 	andis.	r10,r5,0x4000
 	beq+	1f
 	tlbie	r4
+itlbie:
 	/* 0x400 is InstructionAccess exception, needed by bad_page_fault() */
 1:	EXC_XFER_LITE(0x400, handle_page_fault)
 
@@ -585,6 +598,7 @@ DARFixed:/* Return from dcbx instruction bug workaround */
 	andis.	r10,r5,0x4000
 	beq+	1f
 	tlbie	r4
+dtlbie:
 1:	li	r10,RPN_PATTERN
 	mtspr	SPRN_DAR,r10	/* Tag DAR, to be used in DTLB Error */
 	/* 0x300 is DataAccess exception, needed by bad_page_fault() */
@@ -602,8 +616,43 @@ DARFixed:/* Return from dcbx instruction bug workaround */
  * support of breakpoints and such.  Someday I will get around to
  * using them.
  */
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+	. = 0x1c00
+DataBreakpoint:
+	EXCEPTION_PROLOG_0
+	mfcr	r10
+	mfspr	r11, SPRN_SRR0
+	cmplwi	cr0, r11, (dtlbie - PAGE_OFFSET)@l
+	cmplwi	cr7, r11, (itlbie - PAGE_OFFSET)@l
+	beq-	cr0, 11f
+	beq-	cr7, 11f
+	EXCEPTION_PROLOG_1
+	EXCEPTION_PROLOG_2
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mfspr	r4,SPRN_BAR
+	stw	r4,_DAR(r11)
+	mfspr	r5,SPRN_DSISR
+	EXC_XFER_EE(0x1c00, do_break)
+11:
+	mtcr	r10
+	EXCEPTION_EPILOG_0
+	rfi
+
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	. = 0x1d00
+InstructionBreakpoint:
+	EXCEPTION_PROLOG_0
+	lis	r10, (instruction_counter - PAGE_OFFSET)@ha
+	lwz	r11, (instruction_counter - PAGE_OFFSET)@l(r10)
+	addi	r11, r11, -1
+	stw	r11, (instruction_counter - PAGE_OFFSET)@l(r10)
+	lis	r10, 0xffff
+	ori	r10, r10, 0x01
+	mtspr	SPRN_COUNTA, r10
+	EXCEPTION_EPILOG_0
+	rfi
+#else
 	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+#endif
 	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
 
@@ -977,6 +1026,14 @@ initial_mmu:
 	lis	r8, IDC_ENABLE@h
 	mtspr	SPRN_DC_CST, r8
 #endif
+	/* Disable debug mode entry on breakpoints */
+	mfspr	r8, SPRN_DER
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	rlwinm	r8, r8, 0, ~0xc
+#else
+	rlwinm	r8, r8, 0, ~0x8
+#endif
+	mtspr	SPRN_DER, r8
 	blr
 
 
@@ -1010,3 +1067,16 @@ cpu6_errata_word:
 	.space	16
 #endif
 
+#ifdef CONFIG_PPC_8xx_PERF_EVENT
+	.globl	itlb_miss_counter
+itlb_miss_counter:
+	.space	4
+
+	.globl	dtlb_miss_counter
+dtlb_miss_counter:
+	.space	4
+
+	.globl	instruction_counter
+instruction_counter:
+	.space	4
+#endif

arch/powerpc/kernel/hw_breakpoint.c

@@ -211,9 +211,11 @@ int hw_breakpoint_handler(struct die_args *args)
 	int rc = NOTIFY_STOP;
 	struct perf_event *bp;
 	struct pt_regs *regs = args->regs;
+#ifndef CONFIG_PPC_8xx
 	int stepped = 1;
-	struct arch_hw_breakpoint *info;
 	unsigned int instr;
+#endif
+	struct arch_hw_breakpoint *info;
 	unsigned long dar = regs->dar;
 
 	/* Disable breakpoints during exception handling */
@@ -257,6 +259,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	      (dar - bp->attr.bp_addr < bp->attr.bp_len)))
 		info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
 
+#ifndef CONFIG_PPC_8xx
 	/* Do not emulate user-space instructions, instead single-step them */
 	if (user_mode(regs)) {
 		current->thread.last_hit_ubp = bp;
@@ -280,6 +283,7 @@ int hw_breakpoint_handler(struct die_args *args)
 		perf_event_disable_inatomic(bp);
 		goto out;
 	}
+#endif
 	/*
 	 * As a policy, the callback is invoked in a 'trigger-after-execute'
 	 * fashion

arch/powerpc/kernel/process.c

@@ -736,6 +736,28 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
 		mtspr(SPRN_DABRX, dabrx);
 	return 0;
 }
+#elif defined(CONFIG_PPC_8xx)
+static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
+{
+	unsigned long addr = dabr & ~HW_BRK_TYPE_DABR;
+	unsigned long lctrl1 = 0x90000000; /* compare type: equal on E & F */
+	unsigned long lctrl2 = 0x8e000002; /* watchpoint 1 on cmp E | F */
+
+	if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ)
+		lctrl1 |= 0xa0000;
+	else if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE)
+		lctrl1 |= 0xf0000;
+	else if ((dabr & HW_BRK_TYPE_RDWR) == 0)
+		lctrl2 = 0;
+
+	mtspr(SPRN_LCTRL2, 0);
+	mtspr(SPRN_CMPE, addr);
+	mtspr(SPRN_CMPF, addr + 4);
+	mtspr(SPRN_LCTRL1, lctrl1);
+	mtspr(SPRN_LCTRL2, lctrl2);
+
+	return 0;
+}
 #else
 static inline int __set_dabr(unsigned long dabr, unsigned long dabrx)
 {

arch/powerpc/perf/8xx-pmu.c

+/*
+ * Performance event support - PPC 8xx
+ *
+ * Copyright 2016 Christophe Leroy, CS Systemes d'Information
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/pmc.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+
+#define PERF_8xx_ID_CPU_CYCLES		1
+#define PERF_8xx_ID_HW_INSTRUCTIONS	2
+#define PERF_8xx_ID_ITLB_LOAD_MISS	3
+#define PERF_8xx_ID_DTLB_LOAD_MISS	4
+
+#define C(x)	PERF_COUNT_HW_CACHE_##x
+#define DTLB_LOAD_MISS	(C(DTLB) | (C(OP_READ) << 8) | (C(RESULT_MISS) << 16))
+#define ITLB_LOAD_MISS	(C(ITLB) | (C(OP_READ) << 8) | (C(RESULT_MISS) << 16))
+
+extern unsigned long itlb_miss_counter, dtlb_miss_counter;
+extern atomic_t instruction_counter;
+
+static atomic_t insn_ctr_ref;
+
+static s64 get_insn_ctr(void)
+{
+	int ctr;
+	unsigned long counta;
+
+	do {
+		ctr = atomic_read(&instruction_counter);
+		counta = mfspr(SPRN_COUNTA);
+	} while (ctr != atomic_read(&instruction_counter));
+
+	return ((s64)ctr << 16) | (counta >> 16);
+}
+
+static int event_type(struct perf_event *event)
+{
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES)
+			return PERF_8xx_ID_CPU_CYCLES;
+		if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS)
+			return PERF_8xx_ID_HW_INSTRUCTIONS;
+		break;
+	case PERF_TYPE_HW_CACHE:
+		if (event->attr.config == ITLB_LOAD_MISS)
+			return PERF_8xx_ID_ITLB_LOAD_MISS;
+		if (event->attr.config == DTLB_LOAD_MISS)
+			return PERF_8xx_ID_DTLB_LOAD_MISS;
+		break;
+	case PERF_TYPE_RAW:
+		break;
+	default:
+		return -ENOENT;
+	}
+	return -EOPNOTSUPP;
+}
+
+static int mpc8xx_pmu_event_init(struct perf_event *event)
+{
+	int type = event_type(event);
+
+	if (type < 0)
+		return type;
+	return 0;
+}
+
+static int mpc8xx_pmu_add(struct perf_event *event, int flags)
+{
+	int type = event_type(event);
+	s64 val = 0;
+
+	if (type < 0)
+		return type;
+
+	switch (type) {
+	case PERF_8xx_ID_CPU_CYCLES:
+		val = get_tb();
+		break;
+	case PERF_8xx_ID_HW_INSTRUCTIONS:
+		if (atomic_inc_return(&insn_ctr_ref) == 1)
+			mtspr(SPRN_ICTRL, 0xc0080007);
+		val = get_insn_ctr();
+		break;
+	case PERF_8xx_ID_ITLB_LOAD_MISS:
+		val = itlb_miss_counter;
+		break;
+	case PERF_8xx_ID_DTLB_LOAD_MISS:
+		val = dtlb_miss_counter;
+		break;
+	}
+	local64_set(&event->hw.prev_count, val);
+	return 0;
+}
+
+static void mpc8xx_pmu_read(struct perf_event *event)
+{
+	int type = event_type(event);
+	s64 prev, val = 0, delta = 0;
+
+	if (type < 0)
+		return;
+
+	do {
+		prev = local64_read(&event->hw.prev_count);
+		switch (type) {
+		case PERF_8xx_ID_CPU_CYCLES:
+			val = get_tb();
+			delta = 16 * (val - prev);
+			break;
+		case PERF_8xx_ID_HW_INSTRUCTIONS:
+			val = get_insn_ctr();
+			delta = prev - val;
+			if (delta < 0)
+				delta += 0x1000000000000LL;
+			break;
+		case PERF_8xx_ID_ITLB_LOAD_MISS:
+			val = itlb_miss_counter;
+			delta = (s64)((s32)val - (s32)prev);
+			break;
+		case PERF_8xx_ID_DTLB_LOAD_MISS:
+			val = dtlb_miss_counter;
+			delta = (s64)((s32)val - (s32)prev);
+			break;
+		}
+	} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+
+	local64_add(delta, &event->count);
+}
+
+static void mpc8xx_pmu_del(struct perf_event *event, int flags)
+{
+	mpc8xx_pmu_read(event);
+	if (event_type(event) != PERF_8xx_ID_HW_INSTRUCTIONS)
+		return;
+
+	/* If it was the last user, stop counting to avoid useles overhead */
+	if (atomic_dec_return(&insn_ctr_ref) == 0)
+		mtspr(SPRN_ICTRL, 7);
+}
+
+static struct pmu mpc8xx_pmu = {
+	.event_init	= mpc8xx_pmu_event_init,
+	.add		= mpc8xx_pmu_add,
+	.del		= mpc8xx_pmu_del,
+	.read		= mpc8xx_pmu_read,
+	.capabilities	= PERF_PMU_CAP_NO_INTERRUPT |
+			  PERF_PMU_CAP_NO_NMI,
+};
+
+static int init_mpc8xx_pmu(void)
+{
+	mtspr(SPRN_ICTRL, 7);
+	mtspr(SPRN_CMPA, 0);
+	mtspr(SPRN_COUNTA, 0xffff);
+
+	return perf_pmu_register(&mpc8xx_pmu, "cpu", PERF_TYPE_RAW);
+}
+
+early_initcall(init_mpc8xx_pmu);

arch/powerpc/perf/Makefile

@@ -13,5 +13,7 @@ obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
 
 obj-$(CONFIG_HV_PERF_CTRS) += hv-24x7.o hv-gpci.o hv-common.o
 
+obj-$(CONFIG_PPC_8xx_PERF_EVENT) += 8xx-pmu.o
+
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 obj-$(CONFIG_PPC32)		+= $(obj32-y)

arch/powerpc/platforms/85xx/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
 obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
 obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
+obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o

arch/powerpc/platforms/85xx/corenet_generic.c

@@ -157,6 +157,7 @@ static const char * const boards[] __initconst = {
 	"fsl,T1040RDB",
 	"fsl,T1042RDB",
 	"fsl,T1042RDB_PI",
+	"keymile,kmcent2",
 	"keymile,kmcoge4",
 	"varisys,CYRUS",
 	NULL

arch/powerpc/platforms/85xx/t1042rdb_diu.c

+/*
+ * T1042 platform DIU operation
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <sysdev/fsl_soc.h>
+
+/*DIU Pixel ClockCR offset in scfg*/
+#define CCSR_SCFG_PIXCLKCR      0x28
+
+/* DIU Pixel Clock bits of the PIXCLKCR */
+#define PIXCLKCR_PXCKEN		0x80000000
+#define PIXCLKCR_PXCKINV	0x40000000
+#define PIXCLKCR_PXCKDLY	0x0000FF00
+#define PIXCLKCR_PXCLK_MASK	0x00FF0000
+
+/* Some CPLD register definitions */
+#define CPLD_DIUCSR		0x16
+#define CPLD_DIUCSR_DVIEN	0x80
+#define CPLD_DIUCSR_BACKLIGHT	0x0f
+
+struct device_node *cpld_node;
+
+/**
+ * t1042rdb_set_monitor_port: switch the output to a different monitor port
+ */
+static void t1042rdb_set_monitor_port(enum fsl_diu_monitor_port port)
+{
+	static void __iomem *cpld_base;
+
+	cpld_base = of_iomap(cpld_node, 0);
+	if (!cpld_base) {
+		pr_err("%s: Could not map cpld registers\n", __func__);
+		goto exit;
+	}
+
+	switch (port) {
+	case FSL_DIU_PORT_DVI:
+		/* Enable the DVI(HDMI) port, disable the DFP and
+		 * the backlight
+		 */
+		clrbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_DVIEN);
+		break;
+	case FSL_DIU_PORT_LVDS:
+		/*
+		 * LVDS also needs backlight enabled, otherwise the display
+		 * will be blank.
+		 */
+		/* Enable the DFP port, disable the DVI*/
+		setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 8);
+		setbits8(cpld_base + CPLD_DIUCSR, 0x01 << 4);
+		setbits8(cpld_base + CPLD_DIUCSR, CPLD_DIUCSR_BACKLIGHT);
+		break;
+	default:
+		pr_err("%s: Unsupported monitor port %i\n", __func__, port);
+	}
+
+	iounmap(cpld_base);
+exit:
+	of_node_put(cpld_node);
+}
+
+/**
+ * t1042rdb_set_pixel_clock: program the DIU's clock
+ * @pixclock: pixel clock in ps (pico seconds)
+ */
+static void t1042rdb_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *scfg_np;
+	void __iomem *scfg;
+	unsigned long freq;
+	u64 temp;
+	u32 pxclk;
+
+	scfg_np = of_find_compatible_node(NULL, NULL, "fsl,t1040-scfg");
+	if (!scfg_np) {
+		pr_err("%s: Missing scfg node. Can not display video.\n",
+		       __func__);
+		return;
+	}
+
+	scfg = of_iomap(scfg_np, 0);
+	of_node_put(scfg_np);
+	if (!scfg) {
+		pr_err("%s: Could not map device. Can not display video.\n",
+		       __func__);
+		return;
+	}
+
+	/* Convert pixclock into frequency */
+	temp = 1000000000000ULL;
+	do_div(temp, pixclock);
+	freq = temp;
+
+	/*
+	 * 'pxclk' is the ratio of the platform clock to the pixel clock.
+	 * This number is programmed into the PIXCLKCR register, and the valid
+	 * range of values is 2-255.
+	 */
+	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
+	pxclk = clamp_t(u32, pxclk, 2, 255);
+
+	/* Disable the pixel clock, and set it to non-inverted and no delay */
+	clrbits32(scfg + CCSR_SCFG_PIXCLKCR,
+		  PIXCLKCR_PXCKEN | PIXCLKCR_PXCKDLY | PIXCLKCR_PXCLK_MASK);
+
+	/* Enable the clock and set the pxclk */
+	setbits32(scfg + CCSR_SCFG_PIXCLKCR, PIXCLKCR_PXCKEN | (pxclk << 16));
+
+	iounmap(scfg);
+}
+
+/**
+ * t1042rdb_valid_monitor_port: set the monitor port for sysfs
+ */
+static enum fsl_diu_monitor_port
+t1042rdb_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+	switch (port) {
+	case FSL_DIU_PORT_DVI:
+	case FSL_DIU_PORT_LVDS:
+		return port;
+	default:
+		return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
+	}
+}
+
+static int __init t1042rdb_diu_init(void)
+{
+	cpld_node = of_find_compatible_node(NULL, NULL, "fsl,t1042rdb-cpld");
+	if (!cpld_node)
+		return 0;
+
+	diu_ops.set_monitor_port	= t1042rdb_set_monitor_port;
+	diu_ops.set_pixel_clock		= t1042rdb_set_pixel_clock;
+	diu_ops.valid_monitor_port	= t1042rdb_valid_monitor_port;
+
+	return 0;
+}
+
+early_initcall(t1042rdb_diu_init);

arch/powerpc/platforms/Kconfig.cputype

@@ -172,6 +172,13 @@ config PPC_FPU
 	bool
 	default y if PPC64
 
+config PPC_8xx_PERF_EVENT
+	bool "PPC 8xx perf events"
+	depends on PPC_8xx && PERF_EVENTS
+	help
+	  This is Performance Events support for PPC 8xx. The 8xx doesn't
+	  have a PMU but some events are emulated using 8xx features.
+
 config FSL_EMB_PERFMON
 	bool "Freescale Embedded Perfmon"
 	depends on E500 || PPC_83xx