Commit 6d0bdc42 authored by Michael Hanselmann's avatar Michael Hanselmann Committed by Johan Hovold

USB: serial: ch341: fix missing simulated-break margin

On devices which do not support break signalling a break condition is
simulated by sending a NUL byte at the lowest possible speed. The break
condition will be 9 bit periods long (start bit and eight data bits),
but the transmission itself also includes the stop bit.

Add the missing safety margin of one bit which is intended to account
for timing differences, and fix up the corresponding comment.
Signed-off-by: default avatarMichael Hanselmann <public@hansmi.ch>
Link: https://lore.kernel.org/r/9909b288-294d-16b9-9f14-51eb79c63b6c@msgid.hansmi.ch
[ johan: amend commit message ]
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parent c7614ff9
...@@ -604,11 +604,13 @@ static void ch341_simulate_break(struct tty_struct *tty, int break_state) ...@@ -604,11 +604,13 @@ static void ch341_simulate_break(struct tty_struct *tty, int break_state)
} }
/* /*
* Compute expected transmission duration and add a single bit * Compute expected transmission duration including safety
* of safety margin (the actual NUL byte transmission is 8 bits * margin. The original baud rate is only restored after the
* plus one stop bit). * computed point in time.
*
* 11 bits = 1 start, 8 data, 1 stop, 1 margin
*/ */
priv->break_end = jiffies + (10 * HZ / CH341_MIN_BPS); priv->break_end = jiffies + (11 * HZ / CH341_MIN_BPS);
return; return;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment