Commit 6d846c46 authored by Santosh Shilimkar's avatar Santosh Shilimkar Committed by Nishanth Menon

ARM: OMAP5 / DRA7: PM: Enable Mercury retention mode on CPUx powerdomains

In addition to the standard power-management technique, the OMAP5 / DRA7
MPU subsystem also employs an SR3-APG (mercury) power management
technology to reduce leakage.

It allows for full logic and memories retention on MPU_C0 and MPU_C1 and
is controlled by the PRCM_MPU. Only "Fast-mode" is supported on the
OMAP5 and DRA7 family of processors.
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
[nm@ti.com: minor consolidation]
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Reviewed-by: default avatarKevin Hilman <khilman@linaro.org>
Tested-by: default avatarKevin Hilman <khilman@linaro.org>
parent 4664d4d8
...@@ -320,6 +320,21 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state) ...@@ -320,6 +320,21 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
} }
/*
* Enable Mercury Fast HG retention mode by default.
*/
static void enable_mercury_retention_mode(void)
{
u32 reg;
reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST,
OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
/* Enable HG_EN, HG_RAMPUP = fast mode */
reg |= BIT(24) | BIT(25);
omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST,
OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
}
/* /*
* Initialise OMAP4 MPUSS * Initialise OMAP4 MPUSS
*/ */
...@@ -397,6 +412,7 @@ int __init omap4_mpuss_init(void) ...@@ -397,6 +412,7 @@ int __init omap4_mpuss_init(void)
cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET; cpu_context_offset = OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET;
} else if (soc_is_omap54xx() || soc_is_dra7xx()) { } else if (soc_is_omap54xx() || soc_is_dra7xx()) {
cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET; cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET;
enable_mercury_retention_mode();
} }
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment