Commit 6d87f5c3 authored by Ajit Khaparde's avatar Ajit Khaparde Committed by David S. Miller

be2net: fix to dynamically generate MAC Address for VFs

The BE ASIC/firmware doesnot reserve and assign MAC address for VFs.
This results in the VF interfaces being created with MAC Address 0.
The code change proposed takes the MAC address of PF to generate a seed.
MAC Address for VFs are assigned incrementally starting from the seed.
These addresses are programmed in the ASIC by the PF and the VF driver
queries for the MAC address during its probe.
Signed-off-by: default avatarAjit Khaparde <ajitk@serverengines.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent aa7c6e5f
...@@ -413,6 +413,20 @@ static inline void be_check_sriov_fn_type(struct be_adapter *adapter) ...@@ -413,6 +413,20 @@ static inline void be_check_sriov_fn_type(struct be_adapter *adapter)
adapter->is_virtfn = (data != 0xAA); adapter->is_virtfn = (data != 0xAA);
} }
static inline void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac)
{
u32 addr;
addr = jhash(adapter->netdev->dev_addr, ETH_ALEN, 0);
mac[5] = (u8)(addr & 0xFF);
mac[4] = (u8)((addr >> 8) & 0xFF);
mac[3] = (u8)((addr >> 16) & 0xFF);
mac[2] = 0xC9;
mac[1] = 0x00;
mac[0] = 0x00;
}
extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, extern void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,
u16 num_popped); u16 num_popped);
extern void be_link_status_update(struct be_adapter *adapter, bool link_up); extern void be_link_status_update(struct be_adapter *adapter, bool link_up);
......
...@@ -2088,6 +2088,47 @@ static int be_setup_wol(struct be_adapter *adapter, bool enable) ...@@ -2088,6 +2088,47 @@ static int be_setup_wol(struct be_adapter *adapter, bool enable)
return status; return status;
} }
/*
* Generate a seed MAC address from the PF MAC Address using jhash.
* MAC Address for VFs are assigned incrementally starting from the seed.
* These addresses are programmed in the ASIC by the PF and the VF driver
* queries for the MAC address during its probe.
*/
static inline int be_vf_eth_addr_config(struct be_adapter *adapter)
{
u32 vf = 0;
int status;
u8 mac[ETH_ALEN];
be_vf_eth_addr_generate(adapter, mac);
for (vf = 0; vf < num_vfs; vf++) {
status = be_cmd_pmac_add(adapter, mac,
adapter->vf_cfg[vf].vf_if_handle,
&adapter->vf_cfg[vf].vf_pmac_id);
if (status)
dev_err(&adapter->pdev->dev,
"Mac address add failed for VF %d\n", vf);
else
memcpy(adapter->vf_cfg[vf].vf_mac_addr, mac, ETH_ALEN);
mac[5] += 1;
}
return status;
}
static inline void be_vf_eth_addr_rem(struct be_adapter *adapter)
{
u32 vf;
for (vf = 0; vf < num_vfs; vf++) {
if (adapter->vf_cfg[vf].vf_pmac_id != BE_INVALID_PMAC_ID)
be_cmd_pmac_del(adapter,
adapter->vf_cfg[vf].vf_if_handle,
adapter->vf_cfg[vf].vf_pmac_id);
}
}
static int be_setup(struct be_adapter *adapter) static int be_setup(struct be_adapter *adapter)
{ {
struct net_device *netdev = adapter->netdev; struct net_device *netdev = adapter->netdev;
...@@ -2147,10 +2188,20 @@ static int be_setup(struct be_adapter *adapter) ...@@ -2147,10 +2188,20 @@ static int be_setup(struct be_adapter *adapter)
if (status != 0) if (status != 0)
goto rx_qs_destroy; goto rx_qs_destroy;
if (be_physfn(adapter)) {
status = be_vf_eth_addr_config(adapter);
if (status)
goto mcc_q_destroy;
}
adapter->link_speed = -1; adapter->link_speed = -1;
return 0; return 0;
mcc_q_destroy:
if (be_physfn(adapter))
be_vf_eth_addr_rem(adapter);
be_mcc_queues_destroy(adapter);
rx_qs_destroy: rx_qs_destroy:
be_rx_queues_destroy(adapter); be_rx_queues_destroy(adapter);
tx_qs_destroy: tx_qs_destroy:
...@@ -2167,6 +2218,9 @@ static int be_setup(struct be_adapter *adapter) ...@@ -2167,6 +2218,9 @@ static int be_setup(struct be_adapter *adapter)
static int be_clear(struct be_adapter *adapter) static int be_clear(struct be_adapter *adapter)
{ {
if (be_physfn(adapter))
be_vf_eth_addr_rem(adapter);
be_mcc_queues_destroy(adapter); be_mcc_queues_destroy(adapter);
be_rx_queues_destroy(adapter); be_rx_queues_destroy(adapter);
be_tx_queues_destroy(adapter); be_tx_queues_destroy(adapter);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment