Skip to content

L
linux
Commit 6d8e96fb authored by David Jander's avatar David Jander Committed by Shawn Guo
Browse files
Options

ARM: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants 

Factor out common parts of vicut1 and vicutp to reduce maintenance
overhead.
Signed-off-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 901e8f8f
Hide whitespace changes
Inline Side-by-side
Showing with 131 additions and 366 deletions
arch/arm/boot/dts/imx6dl-vicut1.dts
View file @ 6d8e96fb
......@@ -6,130 +6,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-vicut1.dtsi"
#include "imx6qdl-vicut1-12inch.dtsi"
/ {
model = "Kverneland UT1 Board";
compatible = "kvg,vicut1", "fsl,imx6dl";
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
autorepeat;
power {
label = "Power Button";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
};
panel {
compatible = "kyo,tcg121xglp";
backlight = <&backlight_lcd>;
power-supply = <&reg_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-handle = <&rgmii_phy>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Microchip KSZ9031RNX PHY */
rgmii_phy: ethernet-phy@0 {
reg = <0>;
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
&gpio1 {
gpio-line-names =
"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
"CAM2_MIRROR", "", "", "SMBALERT",
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
"SD1_DATA3", "ETH_MDIO", "",
"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
};
&gpio4 {
gpio-line-names =
"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
"CAN2_SR", "CAN2_TX", "CAN2_RX",
"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
"HITCH_IN_OUT",
"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
"ISB_LED";
};
&gpio5 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
"I2S_BITCLK", "I2S_DOUT",
"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
};
&gpio6 {
gpio-line-names =
"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
"ITU656_D6", "ITU656_D7", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
"RGMII_TD3",
"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
"RGMII_RD2", "RGMII_RD3", "", "";
};
&iomuxc {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
/* Phy reset */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
>;
};
pinctrl_gpiokeys: gpiokeygrp {
fsl,pins = <
/* nON_SWITCH */
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6q-vicut1.dts
View file @ 6d8e96fb
......@@ -6,130 +6,9 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-vicut1.dtsi"
#include "imx6qdl-vicut1-12inch.dtsi"
/ {
model = "Kverneland UT1Q Board";
compatible = "kvg,vicut1q", "fsl,imx6q";
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
autorepeat;
power {
label = "Power Button";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
};
panel {
compatible = "kyo,tcg121xglp";
backlight = <&backlight_lcd>;
power-supply = <&reg_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-handle = <&rgmii_phy>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Microchip KSZ9031RNX PHY */
rgmii_phy: ethernet-phy@0 {
reg = <0>;
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
&gpio1 {
gpio-line-names =
"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
"CAM2_MIRROR", "", "", "SMBALERT",
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
"SD1_DATA3", "ETH_MDIO", "",
"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
};
&gpio4 {
gpio-line-names =
"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
"CAN2_SR", "CAN2_TX", "CAN2_RX",
"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
"HITCH_IN_OUT",
"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
"ISB_LED";
};
&gpio5 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
"I2S_BITCLK", "I2S_DOUT",
"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
};
&gpio6 {
gpio-line-names =
"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
"ITU656_D6", "ITU656_D7", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
"RGMII_TD3",
"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
"RGMII_RD2", "RGMII_RD3", "", "";
};
&iomuxc {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
/* Phy reset */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
>;
};
pinctrl_gpiokeys: gpiokeygrp {
fsl,pins = <
/* nON_SWITCH */
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi 0 → 100644
View file @ 6d8e96fb
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2021 Protonic Holland
*/
/ {
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
autorepeat;
power {
label = "Power Button";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
};
panel {
compatible = "kyo,tcg121xglp";
backlight = <&backlight_lcd>;
power-supply = <&reg_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-handle = <&rgmii_phy>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Microchip KSZ9031RNX PHY */
rgmii_phy: ethernet-phy@0 {
reg = <0>;
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
&gpio1 {
gpio-line-names =
"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
"CAM2_MIRROR", "", "", "SMBALERT",
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
"SD1_DATA3", "ETH_MDIO", "",
"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
};
&gpio4 {
gpio-line-names =
"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
"CAN2_SR", "CAN2_TX", "CAN2_RX",
"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
"HITCH_IN_OUT",
"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
"ISB_LED";
};
&gpio5 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
"I2S_BITCLK", "I2S_DOUT",
"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
};
&gpio6 {
gpio-line-names =
"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
"ITU656_D6", "ITU656_D7", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
"RGMII_TD3",
"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
"RGMII_RD2", "RGMII_RD3", "", "";
};
&iomuxc {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
/* Phy reset */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
>;
};
pinctrl_gpiokeys: gpiokeygrp {
fsl,pins = <
/* nON_SWITCH */
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6qp-vicutp.dts
View file @ 6d8e96fb
......@@ -6,130 +6,9 @@
/dts-v1/;
#include "imx6qp.dtsi"
#include "imx6qdl-vicut1.dtsi"
#include "imx6qdl-vicut1-12inch.dtsi"
/ {
model = "Kverneland UT1P Board";
compatible = "kvg,vicutp", "fsl,imx6qp";
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
autorepeat;
power {
label = "Power Button";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
};
panel {
compatible = "kyo,tcg121xglp";
backlight = <&backlight_lcd>;
power-supply = <&reg_3v3>;
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-handle = <&rgmii_phy>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Microchip KSZ9031RNX PHY */
rgmii_phy: ethernet-phy@0 {
reg = <0>;
interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
&gpio1 {
gpio-line-names =
"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
"CAM2_MIRROR", "", "", "SMBALERT",
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
"SD1_DATA3", "ETH_MDIO", "",
"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
};
&gpio4 {
gpio-line-names =
"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
"CAN2_SR", "CAN2_TX", "CAN2_RX",
"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
"HITCH_IN_OUT",
"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
"ISB_LED";
};
&gpio5 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
"I2S_BITCLK", "I2S_DOUT",
"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
};
&gpio6 {
gpio-line-names =
"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
"ITU656_D6", "ITU656_D7", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
"RGMII_TD3",
"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
"RGMII_RD2", "RGMII_RD3", "", "";
};
&iomuxc {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
/* Phy reset */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
>;
};
pinctrl_gpiokeys: gpiokeygrp {
fsl,pins = <
/* nON_SWITCH */
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
>;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7