iio: imu: inv_mpu6050: Add support for ICM-20608-D

The difference between the ICM-20608-D and the other ICM-20608
variants is the addition of a DMP (Digital Motion Processor) core.
This difference is deemed substantial enough to change the WHOAMI
register value.
Since this driver doesn't currently acknowledge the exisence of
something like a DMP core, simply copy ICM-20608 except for the
aforementioned WHOAMI register.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220323121550.16096-3-michael.srba@seznam.czSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/inv_mpu6050/Kconfig

@@ -16,7 +16,7 @@ config INV_MPU6050_I2C
 	select REGMAP_I2C
 	help
 	  This driver supports the Invensense MPU6050/9150,
-	  MPU6500/6515/6880/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690
+	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20602/ICM20690
 	  and IAM20680 motion tracking devices over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
@@ -28,7 +28,7 @@ config INV_MPU6050_SPI
 	select REGMAP_SPI
 	help
 	  This driver supports the Invensense MPU6000,
-	  MPU6500/6515/6880/9250/9255, ICM20608/20609/20689, ICM20602/ICM20690
+	  MPU6500/6515/6880/9250/9255, ICM20608(D)/20609/20689, ICM20602/ICM20690
 	  and IAM20680 motion tracking devices over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -217,6 +217,15 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
 		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
 	},
+	{
+		.whoami = INV_ICM20608D_WHOAMI_VALUE,
+		.name = "ICM20608D",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6500,
+		.fifo_size = 512,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+		.startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+	},
 	{
 		.whoami = INV_ICM20609_WHOAMI_VALUE,
 		.name = "ICM20609",

drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c

@@ -29,6 +29,7 @@ static bool inv_mpu_i2c_aux_bus(struct device *dev)
 
 	switch (st->chip_type) {
 	case INV_ICM20608:
+	case INV_ICM20608D:
 	case INV_ICM20609:
 	case INV_ICM20689:
 	case INV_ICM20602:
@@ -182,6 +183,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20608d", INV_ICM20608D},
 	{"icm20609", INV_ICM20609},
 	{"icm20689", INV_ICM20689},
 	{"icm20602", INV_ICM20602},
@@ -225,6 +227,10 @@ static const struct of_device_id inv_of_match[] = {
 		.compatible = "invensense,icm20608",
 		.data = (void *)INV_ICM20608
 	},
+	{
+		.compatible = "invensense,icm20608d",
+		.data = (void *)INV_ICM20608D
+	},
 	{
 		.compatible = "invensense,icm20609",
 		.data = (void *)INV_ICM20609

drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h

@@ -76,6 +76,7 @@ enum inv_devices {
 	INV_MPU9250,
 	INV_MPU9255,
 	INV_ICM20608,
+	INV_ICM20608D,
 	INV_ICM20609,
 	INV_ICM20689,
 	INV_ICM20602,
@@ -394,6 +395,7 @@ struct inv_mpu6050_state {
 #define INV_MPU9255_WHOAMI_VALUE		0x73
 #define INV_MPU6515_WHOAMI_VALUE		0x74
 #define INV_ICM20608_WHOAMI_VALUE		0xAF
+#define INV_ICM20608D_WHOAMI_VALUE		0xAE
 #define INV_ICM20609_WHOAMI_VALUE		0xA6
 #define INV_ICM20689_WHOAMI_VALUE		0x98
 #define INV_ICM20602_WHOAMI_VALUE		0x12

drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c

@@ -73,6 +73,7 @@ static const struct spi_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20608d", INV_ICM20608D},
 	{"icm20609", INV_ICM20609},
 	{"icm20689", INV_ICM20689},
 	{"icm20602", INV_ICM20602},
@@ -112,6 +113,10 @@ static const struct of_device_id inv_of_match[] = {
 		.compatible = "invensense,icm20608",
 		.data = (void *)INV_ICM20608
 	},
+	{
+		.compatible = "invensense,icm20608d",
+		.data = (void *)INV_ICM20608D
+	},
 	{
 		.compatible = "invensense,icm20609",
 		.data = (void *)INV_ICM20609