net: phy: add Marvell 88X2222 transceiver support

Add basic support for the Marvell 88X2222 multi-speed ethernet
transceiver.

This PHY provides data transmission over fiber-optic as well as Twinax
copper links. The 88X2222 supports 2 ports of 10GBase-R and 1000Base-X
on the line-side interface. The host-side interface supports 4 ports of
10GBase-R, RXAUI, 1000Base-X and 2 ports of XAUI.

This driver, however, supports only XAUI on the host-side and
1000Base-X/10GBase-R on the line-side, for now. The SGMII is also
supported over 1000Base-X. Interrupts are not supported.

Internal registers access compliant with the Clause 45 specification.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/Kconfig

@@ -201,6 +201,12 @@ config MARVELL_10G_PHY
 	help
 	  Support for the Marvell Alaska MV88X3310 and compatible PHYs.
 
+config MARVELL_88X2222_PHY
+	tristate "Marvell 88X2222 PHY"
+	help
+	  Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
+	  Transceiver.
+
 config MICREL_PHY
 	tristate "Micrel PHYs"
 	help

drivers/net/phy/Makefile

@@ -63,6 +63,7 @@ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
 obj-$(CONFIG_LXT_PHY)		+= lxt.o
 obj-$(CONFIG_MARVELL_10G_PHY)	+= marvell10g.o
 obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
 obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
 obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o

include/linux/marvell_phy.h

@@ -24,6 +24,7 @@
 #define MARVELL_PHY_ID_88E3016		0x01410e60
 #define MARVELL_PHY_ID_88X3310		0x002b09a0
 #define MARVELL_PHY_ID_88E2110		0x002b09b0
+#define MARVELL_PHY_ID_88X2222		0x01410f10
 
 /* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
 #define MARVELL_PHY_ID_88E1111_FINISAR	0x01ff0cc0