Commit 6e84a8d7 authored by Jurgen Kramer's avatar Jurgen Kramer Committed by Takashi Iwai

ALSA: usb-audio: Add ctrl message delay quirk for Marantz/Denon devices

This patch adds a USB control message delay quirk for a few specific Marantz/Denon
devices. Without the delay the DACs will not work properly and produces the
following type of messages:

Nov 15 10:09:21 orwell kernel: [   91.342880] usb 3-13: clock source 41 is not valid, cannot use
Nov 15 10:09:21 orwell kernel: [   91.343775] usb 3-13: clock source 41 is not valid, cannot use

There are likely other Marantz/Denon devices using the same USB module which exhibit the
same problems. But as this cannot be verified I limited the patch to the devices
I could test.

The following two devices are covered by this path:
- Marantz SA-14S1
- Marantz HD-DAC1
Signed-off-by: default avatarJurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 3542aed7
...@@ -1146,6 +1146,20 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe, ...@@ -1146,6 +1146,20 @@ void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) && if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
mdelay(20); mdelay(20);
/* Marantz/Denon devices with USB DAC functionality need a delay
* after each class compliant request
*/
if ((le16_to_cpu(dev->descriptor.idVendor) == 0x154e) &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) {
switch (le16_to_cpu(dev->descriptor.idProduct)) {
case 0x3005: /* Marantz HD-DAC1 */
case 0x3006: /* Marantz SA-14S1 */
mdelay(20);
break;
}
}
} }
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment