Commit 6ed7a70b authored by Jiri Kosina's avatar Jiri Kosina

Merge branch 'for-4.15/upstream' into for-linus

- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parents b50b9d3d 7da85fbf
......@@ -230,7 +230,7 @@ config HID_CMEDIA
config HID_CP2112
tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support"
depends on USB_HID && I2C && GPIOLIB
depends on USB_HID && HIDRAW && I2C && GPIOLIB
select GPIOLIB_IRQCHIP
---help---
Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge.
......@@ -750,11 +750,10 @@ config HID_PRIMAX
HID standard.
config HID_RETRODE
tristate "Retrode"
tristate "Retrode 2 USB adapter for vintage video games"
depends on USB_HID
---help---
Support for
* Retrode 2 cartridge and controller adapter
config HID_ROCCAT
......
......@@ -1662,7 +1662,7 @@ static struct bin_attribute dev_bin_attr_report_desc = {
.size = HID_MAX_DESCRIPTOR_SIZE,
};
static struct device_attribute dev_attr_country = {
static const struct device_attribute dev_attr_country = {
.attr = { .name = "country", .mode = 0444 },
.show = show_country,
};
......
......@@ -21,7 +21,7 @@
* Data Sheet:
* http://www.silabs.com/Support%20Documents/TechnicalDocs/CP2112.pdf
* Programming Interface Specification:
* http://www.silabs.com/Support%20Documents/TechnicalDocs/AN495.pdf
* https://www.silabs.com/documents/public/application-notes/an495-cp2112-interface-specification.pdf
*/
#include <linux/gpio.h>
......@@ -196,6 +196,8 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
HID_REQ_GET_REPORT);
if (ret != CP2112_GPIO_CONFIG_LENGTH) {
hid_err(hdev, "error requesting GPIO config: %d\n", ret);
if (ret >= 0)
ret = -EIO;
goto exit;
}
......@@ -205,8 +207,10 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
if (ret < 0) {
if (ret != CP2112_GPIO_CONFIG_LENGTH) {
hid_err(hdev, "error setting GPIO config: %d\n", ret);
if (ret >= 0)
ret = -EIO;
goto exit;
}
......@@ -214,7 +218,7 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
exit:
mutex_unlock(&dev->lock);
return ret < 0 ? ret : -EIO;
return ret;
}
static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
......
......@@ -513,6 +513,9 @@
#define USB_DEVICE_ID_GYRATION_REMOTE_2 0x0003
#define USB_DEVICE_ID_GYRATION_REMOTE_3 0x0008
#define I2C_VENDOR_ID_HANTICK 0x0911
#define I2C_PRODUCT_ID_HANTICK_5288 0x5288
#define USB_VENDOR_ID_HANWANG 0x0b57
#define USB_DEVICE_ID_HANWANG_TABLET_FIRST 0x5000
#define USB_DEVICE_ID_HANWANG_TABLET_LAST 0x8fff
......
......@@ -797,6 +797,15 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
map_key_clear(BTN_STYLUS);
break;
case 0x45: /* ERASER */
/*
* This event is reported when eraser tip touches the surface.
* Actual eraser (BTN_TOOL_RUBBER) is set by Invert usage when
* tool gets in proximity.
*/
map_key_clear(BTN_TOUCH);
break;
case 0x46: /* TabletPick */
case 0x5a: /* SecondaryBarrelSwitch */
map_key_clear(BTN_STYLUS2);
......
......@@ -46,6 +46,7 @@
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
/* flags */
#define I2C_HID_STARTED 0
......@@ -168,6 +169,8 @@ static const struct i2c_hid_quirks {
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
{ 0, 0 }
};
......@@ -252,7 +255,9 @@ static int __i2c_hid_command(struct i2c_client *client,
ret = 0;
if (wait) {
if (wait && (ihid->quirks & I2C_HID_QUIRK_NO_IRQ_AFTER_RESET)) {
msleep(100);
} else if (wait) {
i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
if (!wait_event_timeout(ihid->wait,
!test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
......
......@@ -754,6 +754,7 @@ struct hid_driver {
* @stop: called on remove
* @open: called by input layer on open
* @close: called by input layer on close
* @power: request underlying hardware to enter requested power mode
* @parse: this method is called only once to parse the device data,
* shouldn't allocate anything to not leak memory
* @request: send report request to device (e.g. feature report)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment