Commit 6f4ea207 authored by Gregor Pintar's avatar Gregor Pintar Committed by Takashi Iwai

ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2

Force it to use asynchronous playback.

Same quirk has already been added for Focusrite Scarlett Solo (2nd gen)
with a commit 46f5710f ("ALSA: usb-audio: Add quirk for Focusrite
Scarlett Solo").

This also seems to prevent regular clicks when playing at 44100Hz
on Scarlett 2i2 (2nd gen). I did not notice any side effects.

Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested.
Signed-off-by: default avatarGregor Pintar <grpintar@gmail.com>
Reviewed-by: default avatarAlexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200420214030.2361-1-grpintar@gmail.comSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent a43c1c41
......@@ -2756,90 +2756,6 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.type = QUIRK_MIDI_NOVATION
}
},
{
/*
* Focusrite Scarlett Solo 2nd generation
* Reports that playback should use Synch: Synchronous
* while still providing a feedback endpoint. Synchronous causes
* snapping on some sample rates.
* Force it to use Synch: Asynchronous.
*/
USB_DEVICE(0x1235, 0x8205),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
.ifnum = QUIRK_ANY_INTERFACE,
.type = QUIRK_COMPOSITE,
.data = (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 1,
.type = QUIRK_AUDIO_FIXED_ENDPOINT,
.data = & (const struct audioformat) {
.formats = SNDRV_PCM_FMTBIT_S32_LE,
.channels = 2,
.iface = 1,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
.endpoint = 0x01,
.ep_attr = USB_ENDPOINT_XFER_ISOC |
USB_ENDPOINT_SYNC_ASYNC,
.protocol = UAC_VERSION_2,
.rates = SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000 |
SNDRV_PCM_RATE_176400 |
SNDRV_PCM_RATE_192000,
.rate_min = 44100,
.rate_max = 192000,
.nr_rates = 6,
.rate_table = (unsigned int[]) {
44100, 48000, 88200,
96000, 176400, 192000
},
.clock = 41
}
},
{
.ifnum = 2,
.type = QUIRK_AUDIO_FIXED_ENDPOINT,
.data = & (const struct audioformat) {
.formats = SNDRV_PCM_FMTBIT_S32_LE,
.channels = 2,
.iface = 2,
.altsetting = 1,
.altset_idx = 1,
.attributes = 0,
.endpoint = 0x82,
.ep_attr = USB_ENDPOINT_XFER_ISOC |
USB_ENDPOINT_SYNC_ASYNC |
USB_ENDPOINT_USAGE_IMPLICIT_FB,
.protocol = UAC_VERSION_2,
.rates = SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000 |
SNDRV_PCM_RATE_176400 |
SNDRV_PCM_RATE_192000,
.rate_min = 44100,
.rate_max = 192000,
.nr_rates = 6,
.rate_table = (unsigned int[]) {
44100, 48000, 88200,
96000, 176400, 192000
},
.clock = 41
}
},
{
.ifnum = 3,
.type = QUIRK_IGNORE_INTERFACE
},
{
.ifnum = -1
}
}
}
},
/* Access Music devices */
{
......
......@@ -1806,6 +1806,19 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
*/
fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
break;
case USB_ID(0x1235, 0x8202): /* Focusrite Scarlett 2i2 2nd gen */
case USB_ID(0x1235, 0x8205): /* Focusrite Scarlett Solo 2nd gen */
/*
* Reports that playback should use Synch: Synchronous
* while still providing a feedback endpoint.
* Synchronous causes snapping on some sample rates.
* Force it to use Synch: Asynchronous.
*/
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
fp->ep_attr |= USB_ENDPOINT_SYNC_ASYNC;
}
break;
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment