Commit 6f6304b8 authored by Andrew Milkovich's avatar Andrew Milkovich Committed by Greg Kroah-Hartman

Staging: dgnc: fixed some coding style errors

This patch fixes the following checkpatch.pl error:
ERROR: Macros with complex values should be enclosed in parentheses
Outer parentheses were added to macro definitions.
Signed-off-by: default avatarAndrew Milkovich <amilkovich@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 60e27886
......@@ -38,8 +38,8 @@
#if !defined(TIOCMODG)
#define TIOCMODG ('d'<<8) | 250 /* get modem ctrl state */
#define TIOCMODS ('d'<<8) | 251 /* set modem ctrl state */
#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */
#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */
#ifndef TIOCM_LE
#define TIOCM_LE 0x01 /* line enable */
......@@ -58,44 +58,44 @@
#endif
#if !defined(TIOCMSET)
#define TIOCMSET ('d'<<8) | 252 /* set modem ctrl state */
#define TIOCMGET ('d'<<8) | 253 /* set modem ctrl state */
#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */
#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */
#endif
#if !defined(TIOCMBIC)
#define TIOCMBIC ('d'<<8) | 254 /* set modem ctrl state */
#define TIOCMBIS ('d'<<8) | 255 /* set modem ctrl state */
#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */
#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */
#endif
#if !defined(TIOCSDTR)
#define TIOCSDTR ('e'<<8) | 0 /* set DTR */
#define TIOCCDTR ('e'<<8) | 1 /* clear DTR */
#define TIOCSDTR (('e'<<8) | 0) /* set DTR */
#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */
#endif
/************************************************************************
* Ioctl command arguments for DIGI parameters.
************************************************************************/
#define DIGI_GETA ('e'<<8) | 94 /* Read params */
#define DIGI_GETA (('e'<<8) | 94) /* Read params */
#define DIGI_SETA ('e'<<8) | 95 /* Set params */
#define DIGI_SETAW ('e'<<8) | 96 /* Drain & set params */
#define DIGI_SETAF ('e'<<8) | 97 /* Drain, flush & set params */
#define DIGI_SETA (('e'<<8) | 95) /* Set params */
#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */
#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */
#define DIGI_KME ('e'<<8) | 98 /* Read/Write Host */
#define DIGI_KME (('e'<<8) | 98) /* Read/Write Host */
/* Adapter Memory */
#define DIGI_GETFLOW ('e'<<8) | 99 /* Get startc/stopc flow */
#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */
/* control characters */
#define DIGI_SETFLOW ('e'<<8) | 100 /* Set startc/stopc flow */
#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */
/* control characters */
#define DIGI_GETAFLOW ('e'<<8) | 101 /* Get Aux. startc/stopc */
#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */
/* flow control chars */
#define DIGI_SETAFLOW ('e'<<8) | 102 /* Set Aux. startc/stopc */
#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */
/* flow control chars */
#define DIGI_GEDELAY ('d'<<8) | 246 /* Get edelay */
#define DIGI_SEDELAY ('d'<<8) | 247 /* Set edelay */
#define DIGI_GEDELAY (('d'<<8) | 246) /* Get edelay */
#define DIGI_SEDELAY (('d'<<8) | 247) /* Set edelay */
struct digiflow_t {
unsigned char startc; /* flow cntl start char */
......@@ -104,8 +104,8 @@ struct digiflow_t {
#ifdef FLOW_2200
#define F2200_GETA ('e'<<8) | 104 /* Get 2x36 flow cntl flags */
#define F2200_SETAW ('e'<<8) | 105 /* Set 2x36 flow cntl flags */
#define F2200_GETA (('e'<<8) | 104) /* Get 2x36 flow cntl flags */
#define F2200_SETAW (('e'<<8) | 105) /* Set 2x36 flow cntl flags */
#define F2200_MASK 0x03 /* 2200 flow cntl bit mask */
#define FCNTL_2200 0x01 /* 2x36 terminal flow cntl */
#define PCNTL_2200 0x02 /* 2x36 printer flow cntl */
......@@ -241,7 +241,7 @@ struct digi_dinfo {
char dinfo_version[16]; /* driver version */
};
#define DIGI_GETDD ('d'<<8) | 248 /* get driver info */
#define DIGI_GETDD (('d'<<8) | 248) /* get driver info */
/************************************************************************
* Structure used with ioctl commands for per-board information
......@@ -261,7 +261,7 @@ struct digi_info {
char info_reserved[7]; /* for future expansion */
};
#define DIGI_GETBD ('d'<<8) | 249 /* get board info */
#define DIGI_GETBD (('d'<<8) | 249) /* get board info */
struct digi_stat {
unsigned int info_chan; /* Channel number (0 based) */
......@@ -276,7 +276,7 @@ struct digi_stat {
unsigned int info_reserved[8]; /* for future expansion */
};
#define DIGI_GETSTAT ('d'<<8) | 244 /* get board info */
#define DIGI_GETSTAT (('d'<<8) | 244) /* get board info */
/************************************************************************
*
* Structure used with ioctl commands for per-channel information
......@@ -339,7 +339,7 @@ struct digi_getcounter {
#define INFO_CH_WLOW 0x0020
#define INFO_XXBUF_BUSY 0x0040
#define DIGI_GETCH ('d'<<8) | 245 /* get board info */
#define DIGI_GETCH (('d'<<8) | 245) /* get board info */
/* Board type definitions */
......@@ -384,15 +384,15 @@ struct digi_getcounter {
#define BD_TRIBOOT 0x8
#define BD_BADKME 0x80
#define DIGI_SPOLL ('d'<<8) | 254 /* change poller rate */
#define DIGI_SPOLL (('d'<<8) | 254) /* change poller rate */
#define DIGI_SETCUSTOMBAUD _IOW('e', 106, int) /* Set integer baud rate */
#define DIGI_GETCUSTOMBAUD _IOR('e', 107, int) /* Get integer baud rate */
#define DIGI_REALPORT_GETBUFFERS ('e'<<8) | 108
#define DIGI_REALPORT_SENDIMMEDIATE ('e'<<8) | 109
#define DIGI_REALPORT_GETCOUNTERS ('e'<<8) | 110
#define DIGI_REALPORT_GETEVENTS ('e'<<8) | 111
#define DIGI_REALPORT_GETBUFFERS (('e'<<8) | 108)
#define DIGI_REALPORT_SENDIMMEDIATE (('e'<<8) | 109)
#define DIGI_REALPORT_GETCOUNTERS (('e'<<8) | 110)
#define DIGI_REALPORT_GETEVENTS (('e'<<8) | 111)
#define EV_OPU 0x0001 /* !<Output paused by client */
#define EV_OPS 0x0002 /* !<Output paused by reqular sw flowctrl */
......
......@@ -51,7 +51,7 @@ struct ni_info {
#define RW_READ 1
#define RW_WRITE 2
#define DIGI_KME ('e'<<8) | 98 /* Read/Write Host */
#define DIGI_KME (('e'<<8) | 98) /* Read/Write Host */
#define SUBTYPE 0007
#define T_PCXI 0000
......@@ -106,10 +106,10 @@ struct ni_info {
/* Ioctls needed for dpa operation */
#define DIGI_GETDD ('d'<<8) | 248 /* get driver info */
#define DIGI_GETBD ('d'<<8) | 249 /* get board info */
#define DIGI_GET_NI_INFO ('d'<<8) | 250 /* nonintelligent state snfo */
#define DIGI_GETDD (('d'<<8) | 248) /* get driver info */
#define DIGI_GETBD (('d'<<8) | 249) /* get board info */
#define DIGI_GET_NI_INFO (('d'<<8) | 250) /* nonintelligent state snfo */
/* Other special ioctls */
#define DIGI_TIMERIRQ ('d'<<8) | 251 /* Enable/disable RS_TIMER use */
#define DIGI_LOOPBACK ('d'<<8) | 252 /* Enable/disable UART internal loopback */
#define DIGI_TIMERIRQ (('d'<<8) | 251) /* Enable/disable RS_TIMER use */
#define DIGI_LOOPBACK (('d'<<8) | 252) /* Enable/disable UART internal loopback */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment