Commit 6fcf0615 authored by Haavard Skinnemoen's avatar Haavard Skinnemoen

[AVR32] Wire up USBA device

Implement at32_add_device_usba() and use it to wire up the USBA device
on ATSTK1000 and ATNGW100.
Signed-off-by: default avatarHaavard Skinnemoen <hskinnemoen@atmel.com>
parent 7808fa48
...@@ -154,6 +154,7 @@ static int __init atngw100_init(void) ...@@ -154,6 +154,7 @@ static int __init atngw100_init(void)
set_hw_addr(at32_add_device_eth(1, &eth_data[1])); set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
at32_add_device_usba(0, NULL);
for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
at32_select_gpio(ngw_leds[i].gpio, at32_select_gpio(ngw_leds[i].gpio,
......
...@@ -241,6 +241,7 @@ static int __init atstk1002_init(void) ...@@ -241,6 +241,7 @@ static int __init atstk1002_init(void)
at32_add_device_lcdc(0, &atstk1000_lcdc_data, at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size); fbmem_start, fbmem_size);
#endif #endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM #ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
at32_add_device_ssc(0, ATMEL_SSC_TX); at32_add_device_ssc(0, ATMEL_SSC_TX);
#endif #endif
......
...@@ -1161,6 +1161,72 @@ at32_add_device_ssc(unsigned int id, unsigned int flags) ...@@ -1161,6 +1161,72 @@ at32_add_device_ssc(unsigned int id, unsigned int flags)
return pdev; return pdev;
} }
/* --------------------------------------------------------------------
* USB Device Controller
* -------------------------------------------------------------------- */
static struct resource usba0_resource[] __initdata = {
{
.start = 0xff300000,
.end = 0xff3fffff,
.flags = IORESOURCE_MEM,
}, {
.start = 0xfff03000,
.end = 0xfff033ff,
.flags = IORESOURCE_MEM,
},
IRQ(31),
};
static struct clk usba0_pclk = {
.name = "pclk",
.parent = &pbb_clk,
.mode = pbb_clk_mode,
.get_rate = pbb_clk_get_rate,
.index = 12,
};
static struct clk usba0_hclk = {
.name = "hclk",
.parent = &hsb_clk,
.mode = hsb_clk_mode,
.get_rate = hsb_clk_get_rate,
.index = 6,
};
struct platform_device *__init
at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
{
struct platform_device *pdev;
if (id != 0)
return NULL;
pdev = platform_device_alloc("atmel_usba_udc", 0);
if (!pdev)
return NULL;
if (platform_device_add_resources(pdev, usba0_resource,
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
if (data) {
if (platform_device_add_data(pdev, data, sizeof(*data)))
goto out_free_pdev;
if (data->vbus_pin != GPIO_PIN_NONE)
at32_select_gpio(data->vbus_pin, 0);
}
usba0_pclk.dev = &pdev->dev;
usba0_hclk.dev = &pdev->dev;
platform_device_add(pdev);
return pdev;
out_free_pdev:
platform_device_put(pdev);
return NULL;
}
/* -------------------------------------------------------------------- /* --------------------------------------------------------------------
* GCLK * GCLK
* -------------------------------------------------------------------- */ * -------------------------------------------------------------------- */
...@@ -1246,6 +1312,8 @@ struct clk *at32_clock_list[] = { ...@@ -1246,6 +1312,8 @@ struct clk *at32_clock_list[] = {
&ssc0_pclk, &ssc0_pclk,
&ssc1_pclk, &ssc1_pclk,
&ssc2_pclk, &ssc2_pclk,
&usba0_hclk,
&usba0_pclk,
&gclk0, &gclk0,
&gclk1, &gclk1,
&gclk2, &gclk2,
......
...@@ -6,6 +6,8 @@ ...@@ -6,6 +6,8 @@
#include <linux/types.h> #include <linux/types.h>
#define GPIO_PIN_NONE (-1)
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void); void at32_add_system_devices(void);
...@@ -36,6 +38,12 @@ struct platform_device * ...@@ -36,6 +38,12 @@ struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len); unsigned long fbmem_start, unsigned long fbmem_len);
struct usba_platform_data {
int vbus_pin;
};
struct platform_device *
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
/* depending on what's hooked up, not all SSC pins will be used */ /* depending on what's hooked up, not all SSC pins will be used */
#define ATMEL_SSC_TK 0x01 #define ATMEL_SSC_TK 0x01
#define ATMEL_SSC_TF 0x02 #define ATMEL_SSC_TF 0x02
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment