ath10k: add QCA9887 chipset support

Add the hardware name, revision, firmware names and update the pci_id
table.

QA9887 HW1.0 is supposed to be similar to QCA988X HW2.0 . Details about
he firmware interface are currently unknown.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
[kvalo@qca.qualcomm.com: add a warning about experimental support]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -68,6 +68,25 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA9887_HW_1_0_VERSION,
+		.dev_id = QCA9887_1_0_DEVICE_ID,
+		.name = "qca9887 hw1.0",
+		.patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
+		.has_shifted_cc_wraparound = true,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.hw_4addr_pad = ATH10K_HW_4ADDR_PAD_AFTER,
+		.cal_data_len = 2116,
+		.fw = {
+			.dir = QCA9887_HW_1_0_FW_DIR,
+			.board = QCA9887_HW_1_0_BOARD_DATA_FILE,
+			.board_size = QCA9887_BOARD_DATA_SZ,
+			.board_ext_size = QCA9887_BOARD_EXT_DATA_SZ,
+		},
+	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
 		.dev_id = QCA6164_2_1_DEVICE_ID,
@@ -2095,6 +2114,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 	switch (hw_rev) {
 	case ATH10K_HW_QCA988X:
+	case ATH10K_HW_QCA9887:
 		ar->regs = &qca988x_regs;
 		ar->hw_values = &qca988x_values;
 		break;

drivers/net/wireless/ath/ath10k/hw.h

@@ -28,6 +28,7 @@
 #define QCA99X0_2_0_DEVICE_ID   (0x0040)
 #define QCA9984_1_0_DEVICE_ID	(0x0046)
 #define QCA9377_1_0_DEVICE_ID   (0x0042)
+#define QCA9887_1_0_DEVICE_ID   (0x0050)
 
 /* QCA988X 1.0 definitions (unsupported) */
 #define QCA988X_HW_1_0_CHIP_ID_REV	0x0
@@ -39,6 +40,13 @@
 #define QCA988X_HW_2_0_BOARD_DATA_FILE	"board.bin"
 #define QCA988X_HW_2_0_PATCH_LOAD_ADDR	0x1234
 
+/* QCA9887 1.0 definitions */
+#define QCA9887_HW_1_0_VERSION		0x4100016d
+#define QCA9887_HW_1_0_CHIP_ID_REV	0
+#define QCA9887_HW_1_0_FW_DIR		ATH10K_FW_DIR "/QCA9887/hw1.0"
+#define QCA9887_HW_1_0_BOARD_DATA_FILE	"board.bin"
+#define QCA9887_HW_1_0_PATCH_LOAD_ADDR	0x1234
+
 /* QCA6174 target BMI version signatures */
 #define QCA6174_HW_1_0_VERSION		0x05000000
 #define QCA6174_HW_1_1_VERSION		0x05000001
@@ -205,6 +213,7 @@ enum ath10k_hw_rev {
 	ATH10K_HW_QCA9984,
 	ATH10K_HW_QCA9377,
 	ATH10K_HW_QCA4019,
+	ATH10K_HW_QCA9887,
 };
 
 struct ath10k_hw_regs {
@@ -257,6 +266,7 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
 				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
 
 #define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
+#define QCA_REV_9887(ar) ((ar)->hw_rev == ATH10K_HW_QCA9887)
 #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
 #define QCA_REV_99X0(ar) ((ar)->hw_rev == ATH10K_HW_QCA99X0)
 #define QCA_REV_9984(ar) ((ar)->hw_rev == ATH10K_HW_QCA9984)

drivers/net/wireless/ath/ath10k/pci.c

@@ -58,6 +58,7 @@ static const struct pci_device_id ath10k_pci_id_table[] = {
 	{ PCI_VDEVICE(ATHEROS, QCA99X0_2_0_DEVICE_ID) }, /* PCI-E QCA99X0 V2 */
 	{ PCI_VDEVICE(ATHEROS, QCA9984_1_0_DEVICE_ID) }, /* PCI-E QCA9984 V1 */
 	{ PCI_VDEVICE(ATHEROS, QCA9377_1_0_DEVICE_ID) }, /* PCI-E QCA9377 V1 */
+	{ PCI_VDEVICE(ATHEROS, QCA9887_1_0_DEVICE_ID) }, /* PCI-E QCA9887 */
 	{0}
 };
 
@@ -87,6 +88,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
 	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
 
+	{ QCA9887_1_0_DEVICE_ID, QCA9887_HW_1_0_CHIP_ID_REV },
 };
 
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
@@ -841,6 +843,7 @@ static u32 ath10k_pci_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
 
 	switch (ar->hw_rev) {
 	case ATH10K_HW_QCA988X:
+	case ATH10K_HW_QCA9887:
 	case ATH10K_HW_QCA6174:
 	case ATH10K_HW_QCA9377:
 		val = (ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
@@ -1569,6 +1572,7 @@ static void ath10k_pci_irq_msi_fw_mask(struct ath10k *ar)
 
 	switch (ar->hw_rev) {
 	case ATH10K_HW_QCA988X:
+	case ATH10K_HW_QCA9887:
 	case ATH10K_HW_QCA6174:
 	case ATH10K_HW_QCA9377:
 		val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
@@ -1593,6 +1597,7 @@ static void ath10k_pci_irq_msi_fw_unmask(struct ath10k *ar)
 
 	switch (ar->hw_rev) {
 	case ATH10K_HW_QCA988X:
+	case ATH10K_HW_QCA9887:
 	case ATH10K_HW_QCA6174:
 	case ATH10K_HW_QCA9377:
 		val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
@@ -1944,6 +1949,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
 	case QCA988X_2_0_DEVICE_ID:
 	case QCA99X0_2_0_DEVICE_ID:
 	case QCA9984_1_0_DEVICE_ID:
+	case QCA9887_1_0_DEVICE_ID:
 		return 1;
 	case QCA6164_2_1_DEVICE_ID:
 	case QCA6174_2_1_DEVICE_ID:
@@ -2998,6 +3004,13 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		pci_soft_reset = ath10k_pci_warm_reset;
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		break;
+	case QCA9887_1_0_DEVICE_ID:
+		dev_warn(&pdev->dev, "QCA9887 support is still experimental, there are likely bugs. You have been warned.\n");
+		hw_rev = ATH10K_HW_QCA9887;
+		pci_ps = false;
+		pci_soft_reset = ath10k_pci_warm_reset;
+		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
+		break;
 	case QCA6164_2_1_DEVICE_ID:
 	case QCA6174_2_1_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA6174;
@@ -3210,6 +3223,11 @@ MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API5_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
 MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_BOARD_API2_FILE);
 
+/* QCA9887 1.0 firmware files */
+MODULE_FIRMWARE(QCA9887_HW_1_0_FW_DIR "/" ATH10K_FW_API5_FILE);
+MODULE_FIRMWARE(QCA9887_HW_1_0_FW_DIR "/" QCA9887_HW_1_0_BOARD_DATA_FILE);
+MODULE_FIRMWARE(QCA9887_HW_1_0_FW_DIR "/" ATH10K_BOARD_API2_FILE);
+
 /* QCA6174 2.1 firmware files */
 MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_FW_API4_FILE);
 MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_FW_API5_FILE);

drivers/net/wireless/ath/ath10k/targaddrs.h

@@ -447,6 +447,9 @@ Fw Mode/SubMode Mask
 #define QCA988X_BOARD_DATA_SZ     7168
 #define QCA988X_BOARD_EXT_DATA_SZ 0
 
+#define QCA9887_BOARD_DATA_SZ     7168
+#define QCA9887_BOARD_EXT_DATA_SZ 0
+
 #define QCA6174_BOARD_DATA_SZ     8192
 #define QCA6174_BOARD_EXT_DATA_SZ 0