Commit 6ff94537 authored by Fabien Parent's avatar Fabien Parent Committed by Matthias Brugger

arm64: dts: mediatek: Initial mt8365-evk support

This adds minimal support for the Mediatek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.
Signed-off-by: default avatarFabien Parent <fparent@baylibre.com>
[bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC]
Signed-off-by: default avatarBernhard Rosenkränzer <bero@baylibre.com>
[aouledameur@baylibre.com: Fix systimer properties]
Signed-off-by: default avatarAmjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-off-by: default avatarAlexandre Mergnat <amergnat@baylibre.com>
Tested-by: default avatarKevin Hilman <khilman@baylibre.com>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230309213501.794764-4-bero@baylibre.comSigned-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent 40420096
......@@ -52,4 +52,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2021-2022 BayLibre, SAS.
* Authors:
* Fabien Parent <fparent@baylibre.com>
* Bernhard Rosenkränzer <bero@baylibre.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
#include "mt8365.dtsi"
/ {
model = "MediaTek MT8365 Open Platform EVK";
compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:921600n8";
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys>;
key-volume-up {
gpios = <&pio 24 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
debounce-interval = <15>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0xc0000000>;
};
usb_otg_vbus: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
bl31_secmon_reserved: secmon@43000000 {
no-map;
reg = <0 0x43000000 0 0x20000>;
};
/* 12 MiB reserved for OP-TEE (BL32)
* +-----------------------+ 0x43e0_0000
* | SHMEM 2MiB |
* +-----------------------+ 0x43c0_0000
* | | TA_RAM 8MiB |
* + TZDRAM +--------------+ 0x4340_0000
* | | TEE_RAM 2MiB |
* +-----------------------+ 0x4320_0000
*/
optee_reserved: optee@43200000 {
no-map;
reg = <0 0x43200000 0 0x00c00000>;
};
};
};
&pio {
gpio_keys: gpio-keys-pins {
pins {
pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
bias-pull-up;
input-enable;
};
};
uart0_pins: uart0-pins {
pins {
pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
<MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
};
};
uart1_pins: uart1-pins {
pins {
pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
<MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
};
};
uart2_pins: uart2-pins {
pins {
pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
<MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
};
};
usb_pins: usb-pins {
id-pins {
pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
input-enable;
bias-pull-up;
};
usb0-vbus-pins {
pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
output-high;
};
usb1-vbus-pins {
pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
output-high;
};
};
pwm_pins: pwm-pins {
pins {
pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
<MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
};
};
};
&pwm {
pinctrl-0 = <&pwm_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart1 {
pinctrl-0 = <&uart1_pins>;
pinctrl-names = "default";
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
status = "okay";
};
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* (C) 2018 MediaTek Inc.
* Copyright (C) 2022 BayLibre SAS
* Fabien Parent <fparent@baylibre.com>
* Bernhard Rosenkränzer <bero@baylibre.com>
*/
#include <dt-bindings/clock/mediatek,mt8365-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
/ {
compatible = "mediatek,mt8365";
interrupt-parent = <&sysirq>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
core2 {
cpu = <&cpu2>;
};
core3 {
cpu = <&cpu3>;
};
};
};
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
#cooling-cells = <2>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
#cooling-cells = <2>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
#cooling-cells = <2>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
#cooling-cells = <2>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2>;
};
l2: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
cache-unified;
};
};
clk26m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "clk26m";
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
soc {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
ranges;
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
interrupt-controller;
reg = <0 0x0c000000 0 0x10000>, /* GICD */
<0 0x0c080000 0 0x80000>, /* GICR */
<0 0x0c400000 0 0x2000>, /* GICC */
<0 0x0c410000 0 0x1000>, /* GICH */
<0 0x0c420000 0 0x2000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
topckgen: syscon@10000000 {
compatible = "mediatek,mt8365-topckgen", "syscon";
reg = <0 0x10000000 0 0x1000>;
#clock-cells = <1>;
};
infracfg: syscon@10001000 {
compatible = "mediatek,mt8365-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
};
pericfg: syscon@10003000 {
compatible = "mediatek,mt8365-pericfg", "syscon";
reg = <0 0x10003000 0 0x1000>;
#clock-cells = <1>;
};
syscfg_pctl: syscfg-pctl@10005000 {
compatible = "mediatek,mt8365-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
};
pio: pinctrl@1000b000 {
compatible = "mediatek,mt8365-pinctrl";
reg = <0 0x1000b000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
};
apmixedsys: syscon@1000c000 {
compatible = "mediatek,mt8365-apmixedsys", "syscon";
reg = <0 0x1000c000 0 0x1000>;
#clock-cells = <1>;
};
keypad: keypad@10010000 {
compatible = "mediatek,mt6779-keypad";
reg = <0 0x10010000 0 0x1000>;
wakeup-source;
interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
clocks = <&clk26m>;
clock-names = "kpd";
status = "disabled";
};
mcucfg: syscon@10200000 {
compatible = "mediatek,mt8365-mcucfg", "syscon";
reg = <0 0x10200000 0 0x2000>;
#clock-cells = <1>;
};
sysirq: interrupt-controller@10200a80 {
compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq";
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10200a80 0 0x20>;
};
infracfg_nao: infracfg@1020e000 {
compatible = "mediatek,mt8365-infracfg", "syscon";
reg = <0 0x1020e000 0 0x1000>;
#clock-cells = <1>;
};
rng: rng@1020f000 {
compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng";
reg = <0 0x1020f000 0 0x100>;
clocks = <&infracfg CLK_IFR_TRNG>;
clock-names = "rng";
};
apdma: dma-controller@11000280 {
compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma";
reg = <0 0x11000280 0 0x80>,
<0 0x11000300 0 0x80>,
<0 0x11000380 0 0x80>,
<0 0x11000400 0 0x80>,
<0 0x11000580 0 0x80>,
<0 0x11000600 0 0x80>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
dma-requests = <6>;
clocks = <&infracfg CLK_IFR_AP_DMA>;
clock-names = "apdma";
#dma-cells = <1>;
};
uart0: serial@11002000 {
compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
clock-names = "baud", "bus";
dmas = <&apdma 0>, <&apdma 1>;
dma-names = "tx", "rx";
status = "disabled";
};
uart1: serial@11003000 {
compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
clock-names = "baud", "bus";
dmas = <&apdma 2>, <&apdma 3>;
dma-names = "tx", "rx";
status = "disabled";
};
uart2: serial@11004000 {
compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
clock-names = "baud", "bus";
dmas = <&apdma 4>, <&apdma 5>;
dma-names = "tx", "rx";
status = "disabled";
};
pwm: pwm@11006000 {
compatible = "mediatek,mt8365-pwm";
reg = <0 0x11006000 0 0x1000>;
#pwm-cells = <2>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_IFR_PWM_HCLK>,
<&infracfg CLK_IFR_PWM>,
<&infracfg CLK_IFR_PWM1>,
<&infracfg CLK_IFR_PWM2>,
<&infracfg CLK_IFR_PWM3>;
clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
};
spi: spi@1100a000 {
compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
reg = <0 0x1100a000 0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
<&topckgen CLK_TOP_SPI_SEL>,
<&infracfg CLK_IFR_SPI0>;
clock-names = "parent-clk", "sel-clk", "spi-clk";
status = "disabled";
};
ssusb: usb@11201000 {
compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
phys = <&u2port0 PHY_TYPE_USB2>,
<&u2port1 PHY_TYPE_USB2>;
clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
<&infracfg CLK_IFR_SSUSB_REF>,
<&infracfg CLK_IFR_SSUSB_SYS>,
<&infracfg CLK_IFR_ICUSB>;
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
usb_host: usb@11200000 {
compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci";
reg = <0 0x11200000 0 0x1000>;
reg-names = "mac";
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
<&infracfg CLK_IFR_SSUSB_REF>,
<&infracfg CLK_IFR_SSUSB_SYS>,
<&infracfg CLK_IFR_ICUSB>,
<&infracfg CLK_IFR_SSUSB_XHCI>;
clock-names = "sys_ck", "ref_ck", "mcu_ck",
"dma_ck", "xhci_ck";
status = "disabled";
};
};
u3phy: t-phy@11cc0000 {
compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x11cc0000 0x9000>;
u2port0: usb-phy@0 {
reg = <0x0 0x400>;
clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
<&topckgen CLK_TOP_USB20_48M_EN>;
clock-names = "ref", "da_ref";
#phy-cells = <1>;
};
u2port1: usb-phy@1000 {
reg = <0x1000 0x400>;
clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
<&topckgen CLK_TOP_USB20_48M_EN>;
clock-names = "ref", "da_ref";
#phy-cells = <1>;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
#clock-cells = <0>;
};
systimer: timer@10017000 {
compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer";
reg = <0 0x10017000 0 0x100>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&system_clk>;
clock-names = "clk13m";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment