Merge tag 'imx-fixes-5.4-2' of...

Merge tag 'imx-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.4, 2nd round:
 - Get SNVS power key back to work for imx6-logicpd board. It was
   accidentally disabled by commit 770856f0 ("ARM: dts: imx6qdl:
   Enable SNVS power key according to board design").
 - Fix sparse warnings in IMX GPC driver by making the initializers
   in imx_gpc_domains C99 format.
 - Fix an interrupt storm coming from accelerometer on imx6qdl-sabreauto
   board. This is seen with upstream version U-Boot where pinctrl is not
   configured for the device.
 - Fix sdma device compatible string for i.MX8MM and i.MX8MN SoC.
 - Fix compatible of PCA9547 i2c-mux on LS1028A QDS board to get the
   device probed correctly.

* tag 'imx-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mn: fix compatible string for sdma
  arm64: dts: imx8mm: fix compatible string for sdma
  ARM: dts: imx6-logicpd: Re-enable SNVS power key
  soc: imx: gpc: fix initialiser format
  ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
  arm64: dts: ls1028a: fix a compatible issue

Link: https://lore.kernel.org/r/20191029110334.GA20928@dragonSigned-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi

@@ -328,6 +328,10 @@ &pwm3 {
 	pinctrl-0 = <&pinctrl_pwm3>;
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -230,6 +230,8 @@ magnetometer@e {
 			accelerometer@1c {
 				compatible = "fsl,mma8451";
 				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
 				interrupt-parent = <&gpio6>;
 				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 			};
@@ -628,6 +630,12 @@ MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
 			>;
 		};
 
+		pinctrl_mma8451_int: mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts

@@ -127,7 +127,7 @@ &i2c0 {
 	status = "okay";
 
 	i2c-mux@77 {
-		compatible = "nxp,pca9847";
+		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -394,7 +394,7 @@ wdog3: watchdog@302a0000 {
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -405,7 +405,7 @@ sdma2: dma-controller@302c0000 {
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -737,7 +737,7 @@ usdhc3: mmc@30b60000 {
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -288,7 +288,7 @@ wdog3: watchdog@302a0000 {
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
@@ -299,7 +299,7 @@ sdma3: dma-controller@302b0000 {
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
@@ -612,7 +612,7 @@ usdhc3: mmc@30b60000 {
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,

drivers/soc/imx/gpc.c

@@ -249,13 +249,13 @@ static struct genpd_power_state imx6_pm_domain_pu_state = {
 };
 
 static struct imx_pm_domain imx_gpc_domains[] = {
-	[GPC_PGC_DOMAIN_ARM] {
+	[GPC_PGC_DOMAIN_ARM] = {
 		.base = {
 			.name = "ARM",
 			.flags = GENPD_FLAG_ALWAYS_ON,
 		},
 	},
-	[GPC_PGC_DOMAIN_PU] {
+	[GPC_PGC_DOMAIN_PU] = {
 		.base = {
 			.name = "PU",
 			.power_off = imx6_pm_domain_power_off,
@@ -266,7 +266,7 @@ static struct imx_pm_domain imx_gpc_domains[] = {
 		.reg_offs = 0x260,
 		.cntr_pdn_bit = 0,
 	},
-	[GPC_PGC_DOMAIN_DISPLAY] {
+	[GPC_PGC_DOMAIN_DISPLAY] = {
 		.base = {
 			.name = "DISPLAY",
 			.power_off = imx6_pm_domain_power_off,
@@ -275,7 +275,7 @@ static struct imx_pm_domain imx_gpc_domains[] = {
 		.reg_offs = 0x240,
 		.cntr_pdn_bit = 4,
 	},
-	[GPC_PGC_DOMAIN_PCI] {
+	[GPC_PGC_DOMAIN_PCI] = {
 		.base = {
 			.name = "PCI",
 			.power_off = imx6_pm_domain_power_off,