Merge branch 'bnx2x-next'

Yuval Mintz says:

====================
bnx2x: update FW, rebrand and more

This patch series does several things - it updates the bnx2x FW into
7.12.30 which both contains some small fixes as well as opening the door
for several new features for the device - mainly vxlan/geneve offloads
and vlan filtering offload.
It then adds a new Multi-function mode [BD] which requires this FW in
order to operate.

In addition, this finally rebrands the driver from a 'broadcom' driver
into a 'qlogic' driver [although it would still reside under Broadcom's
tree in the kernel].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

-/* bnx2x.h: Broadcom Everest network driver.
+/* bnx2x.h: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -30,7 +32,7 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.710.51-0"
+#define DRV_MODULE_VERSION      "1.712.30-0"
 #define DRV_MODULE_RELDATE      "2014/02/10"
 #define BNX2X_BC_VER            0x040200
 
@@ -1422,6 +1424,7 @@ enum {
 	SUB_MF_MODE_UNKNOWN = 0,
 	SUB_MF_MODE_UFP,
 	SUB_MF_MODE_NPAR1_DOT_5,
+	SUB_MF_MODE_BD,
 };
 
 struct bnx2x {
@@ -1636,6 +1639,8 @@ struct bnx2x {
 	u8			mf_sub_mode;
 #define IS_MF_UFP(bp)		(IS_MF_SD(bp) && \
 				 bp->mf_sub_mode == SUB_MF_MODE_UFP)
+#define IS_MF_BD(bp)		(IS_MF_SD(bp) && \
+				 bp->mf_sub_mode == SUB_MF_MODE_BD)
 
 	u8			wol;
 
@@ -2577,6 +2582,8 @@ void bnx2x_set_local_cmng(struct bnx2x *bp);
 
 void bnx2x_update_mng_version(struct bnx2x *bp);
 
+void bnx2x_update_mfw_dump(struct bnx2x *bp);
+
 #define MCPR_SCRATCH_BASE(bp) \
 	(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

-/* bnx2x_cmn.c: Broadcom Everest network driver.
+/* bnx2x_cmn.c: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2103,9 +2105,14 @@ int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj,
 		if (rss_obj->udp_rss_v6)
 			__set_bit(BNX2X_RSS_IPV6_UDP, &params.rss_flags);
 
-		if (!CHIP_IS_E1x(bp))
+		if (!CHIP_IS_E1x(bp)) {
+			/* valid only for TUNN_MODE_VXLAN tunnel mode */
+			__set_bit(BNX2X_RSS_IPV4_VXLAN, &params.rss_flags);
+			__set_bit(BNX2X_RSS_IPV6_VXLAN, &params.rss_flags);
+
 			/* valid only for TUNN_MODE_GRE tunnel mode */
-			__set_bit(BNX2X_RSS_GRE_INNER_HDRS, &params.rss_flags);
+			__set_bit(BNX2X_RSS_TUNN_INNER_HDRS, &params.rss_flags);
+		}
 	} else {
 		__set_bit(BNX2X_RSS_MODE_DISABLED, &params.rss_flags);
 	}
@@ -2510,6 +2517,20 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
 		fp->mode = TPA_MODE_DISABLED;
 }
 
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state)
+{
+	u32 cur;
+
+	if (!IS_MF_BD(bp) || !SHMEM2_HAS(bp, os_driver_state) || IS_VF(bp))
+		return;
+
+	cur = SHMEM2_RD(bp, os_driver_state[BP_FW_MB_IDX(bp)]);
+	DP(NETIF_MSG_IFUP, "Driver state %08x-->%08x\n",
+	   cur, state);
+
+	SHMEM2_WR(bp, os_driver_state[BP_FW_MB_IDX(bp)], state);
+}
+
 int bnx2x_load_cnic(struct bnx2x *bp)
 {
 	int i, rc, port = BP_PORT(bp);
@@ -2873,6 +2894,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		/* mark driver is loaded in shmem2 */
 		u32 val;
 		val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
+		val &= ~DRV_FLAGS_MTU_MASK;
+		val |= (bp->dev->mtu << DRV_FLAGS_MTU_SHIFT);
 		SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
 			  val | DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
 			  DRV_FLAGS_CAPABILITIES_LOADED_L2);
@@ -2885,10 +2908,17 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		return -EBUSY;
 	}
 
+	/* Update driver data for On-Chip MFW dump. */
+	if (IS_PF(bp))
+		bnx2x_update_mfw_dump(bp);
+
 	/* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */
 	if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
 		bnx2x_dcbx_init(bp, false);
 
+	if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+		bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_ACTIVE);
+
 	DP(NETIF_MSG_IFUP, "Ending successfully NIC load\n");
 
 	return 0;
@@ -2956,6 +2986,9 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
 
 	DP(NETIF_MSG_IFUP, "Starting NIC unload\n");
 
+	if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+		bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
+
 	/* mark driver is unloaded in shmem2 */
 	if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
 		u32 val;
@@ -3677,7 +3710,7 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb,
 		pbd2->fw_ip_hdr_to_payload_w =
 			hlen_w - ((sizeof(struct ipv6hdr)) >> 1);
 		pbd_e2->data.tunnel_data.flags |=
-			ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER;
+			ETH_TUNNEL_DATA_IPV6_OUTER;
 	}
 
 	pbd2->tcp_send_seq = bswab32(inner_tcp_hdr(skb)->seq);
@@ -4184,6 +4217,41 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	return NETDEV_TX_OK;
 }
 
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default)
+{
+	int mfw_vn = BP_FW_MB_IDX(bp);
+	u32 tmp;
+
+	/* If the shmem shouldn't affect configuration, reflect */
+	if (!IS_MF_BD(bp)) {
+		int i;
+
+		for (i = 0; i < BNX2X_MAX_PRIORITY; i++)
+			c2s_map[i] = i;
+		*c2s_default = 0;
+
+		return;
+	}
+
+	tmp = SHMEM2_RD(bp, c2s_pcp_map_lower[mfw_vn]);
+	tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+	c2s_map[0] = tmp & 0xff;
+	c2s_map[1] = (tmp >> 8) & 0xff;
+	c2s_map[2] = (tmp >> 16) & 0xff;
+	c2s_map[3] = (tmp >> 24) & 0xff;
+
+	tmp = SHMEM2_RD(bp, c2s_pcp_map_upper[mfw_vn]);
+	tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+	c2s_map[4] = tmp & 0xff;
+	c2s_map[5] = (tmp >> 8) & 0xff;
+	c2s_map[6] = (tmp >> 16) & 0xff;
+	c2s_map[7] = (tmp >> 24) & 0xff;
+
+	tmp = SHMEM2_RD(bp, c2s_pcp_map_default[mfw_vn]);
+	tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+	*c2s_default = (tmp >> (8 * mfw_vn)) & 0xff;
+}
+
 /**
  * bnx2x_setup_tc - routine to configure net_device for multi tc
  *
@@ -4194,8 +4262,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
  */
 int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 {
-	int cos, prio, count, offset;
 	struct bnx2x *bp = netdev_priv(dev);
+	u8 c2s_map[BNX2X_MAX_PRIORITY], c2s_def;
+	int cos, prio, count, offset;
 
 	/* setup tc must be called under rtnl lock */
 	ASSERT_RTNL();
@@ -4219,12 +4288,16 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
 		return -EINVAL;
 	}
 
+	bnx2x_get_c2s_mapping(bp, c2s_map, &c2s_def);
+
 	/* configure priority to traffic class mapping */
 	for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
-		netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
+		int outer_prio = c2s_map[prio];
+
+		netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[outer_prio]);
 		DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
 		   "mapping priority %d to tc %d\n",
-		   prio, bp->prio_to_cos[prio]);
+		   outer_prio, bp->prio_to_cos[outer_prio]);
 	}
 
 	/* Use this configuration to differentiate tc0 from other COSes
@@ -4278,6 +4351,9 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p)
 	if (netif_running(dev))
 		rc = bnx2x_set_eth_mac(bp, true);
 
+	if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
+		SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
 	return rc;
 }
 
@@ -4831,6 +4907,9 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
 	 */
 	dev->mtu = new_mtu;
 
+	if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
+		SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
 	return bnx2x_reload_if_running(dev);
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

-/* bnx2x_cmn.h: Broadcom Everest network driver.
+/* bnx2x_cmn.h: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -620,6 +622,14 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features);
  */
 void bnx2x_tx_timeout(struct net_device *dev);
 
+/** bnx2x_get_c2s_mapping - read inner-to-outer vlan configuration
+ * c2s_map should have BNX2X_MAX_PRIORITY entries.
+ * @bp:			driver handle
+ * @c2s_map:		should have BNX2X_MAX_PRIORITY entries for mapping
+ * @c2s_default:	entry for non-tagged configuration
+ */
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default);
+
 /*********************** Inlines **********************************/
 /*********************** Fast path ********************************/
 static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -931,14 +941,33 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
 	start_params->mf_mode = bp->mf_mode;
 	start_params->sd_vlan_tag = bp->mf_ov;
 
+	/* Configure Ethertype for BD mode */
+	if (IS_MF_BD(bp)) {
+		DP(NETIF_MSG_IFUP, "Configuring ethertype 0x88a8 for BD\n");
+		start_params->sd_vlan_eth_type = ETH_P_8021AD;
+		REG_WR(bp, PRS_REG_VLAN_TYPE_0, ETH_P_8021AD);
+		REG_WR(bp, PBF_REG_VLAN_TYPE_0, ETH_P_8021AD);
+		REG_WR(bp, NIG_REG_LLH_E1HOV_TYPE_1, ETH_P_8021AD);
+
+		bnx2x_get_c2s_mapping(bp, start_params->c2s_pri,
+				      &start_params->c2s_pri_default);
+		start_params->c2s_pri_valid = 1;
+
+		DP(NETIF_MSG_IFUP,
+		   "Inner-to-Outer priority: %02x %02x %02x %02x %02x %02x %02x %02x [Default %02x]\n",
+		   start_params->c2s_pri[0], start_params->c2s_pri[1],
+		   start_params->c2s_pri[2], start_params->c2s_pri[3],
+		   start_params->c2s_pri[4], start_params->c2s_pri[5],
+		   start_params->c2s_pri[6], start_params->c2s_pri[7],
+		   start_params->c2s_pri_default);
+	}
+
 	if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp))
 		start_params->network_cos_mode = STATIC_COS;
 	else /* CHIP_IS_E1X */
 		start_params->network_cos_mode = FW_WRR;
 
-	start_params->tunnel_mode	= TUNN_MODE_GRE;
-	start_params->gre_tunnel_type	= IPGRE_TUNNEL;
-	start_params->inner_gre_rss_en	= 1;
+	start_params->inner_rss = 1;
 
 	if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
 		start_params->class_fail_ethtype = ETH_P_FIP;
@@ -1339,4 +1368,11 @@ void bnx2x_squeeze_objects(struct bnx2x *bp);
 void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag,
 			    u32 verbose);
 
+/**
+ * bnx2x_set_os_driver_state - write driver state for management FW usage
+ *
+ * @bp:		driver handle
+ * @state:	OS_DRIVER_STATE_* value reflecting current driver state
+ */
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state);
 #endif /* BNX2X_CMN_H */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

-/* bnx2x_dcb.c: Broadcom Everest network driver.
+/* bnx2x_dcb.c: QLogic Everest network driver.
  *
  * Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@@ -1850,6 +1852,8 @@ static void bnx2x_dcbx_fw_struct(struct bnx2x *bp,
 			if (bp->dcbx_port_params.ets.cos_params[cos].
 						pri_bitmask & pri_bit)
 					tt2cos[pri].cos = cos;
+
+		pfc_fw_cfg->dcb_outer_pri[pri]  = ttp[pri];
 	}
 
 	/* we never want the FW to add a 0 vlan tag */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h

-/* bnx2x_dcb.h: Broadcom Everest network driver.
+/* bnx2x_dcb.h: QLogic Everest network driver.
  *
  * Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h

-/* bnx2x_dump.h: Broadcom Everest network driver.
+/* bnx2x_dump.h: QLogic Everest network driver.
  *
  * Copyright (c) 2012-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
  * consent.
  */
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

-/* bnx2x_ethtool.c: Broadcom Everest network driver.
+/* bnx2x_ethtool.c: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1129,6 +1131,9 @@ static int bnx2x_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	} else
 		bp->wol = 0;
 
+	if (SHMEM2_HAS(bp, curr_cfg))
+		SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
 	return 0;
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h

-/* bnx2x_fw_defs.h: Broadcom Everest network driver.
+/* bnx2x_fw_defs.h: Qlogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -372,7 +374,7 @@
 #define MAX_COS_NUMBER 4
 #define MAX_TRAFFIC_TYPES 8
 #define MAX_PFC_PRIORITIES 8
-
+#define MAX_VLAN_PRIORITIES 8
 	/* used by array traffic_type_to_priority[] to mark traffic type \
 	that is not mapped to priority*/
 #define LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED 0xFF

drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h

 /* bnx2x_fw_file_hdr.h: FW binary file header structure.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h

-/* bnx2x_init.h: Broadcom Everest network driver.
+/* bnx2x_init.h: Qlogic Everest network driver.
  *               Structures and macroes needed during the initialization.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h

-/* bnx2x_init_ops.h: Broadcom Everest network driver.
+/* bnx2x_init_ops.h: Qlogic Everest network driver.
  *               Static functions needed during the initialization.
  *               This file is "included" in bnx2x_main.c.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h

 /* Copyright 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
  * consent.
  *
  * Written by Yaniv Rosner

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

-/* bnx2x_main.c: Broadcom Everest network driver.
+/* bnx2x_main.c: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -81,11 +83,11 @@
 #define TX_TIMEOUT		(5*HZ)
 
 static char version[] =
-	"Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
+	"QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver "
 	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Eliezer Tamir");
-MODULE_DESCRIPTION("Broadcom NetXtreme II "
+MODULE_DESCRIPTION("QLogic "
 		   "BCM57710/57711/57711E/"
 		   "57712/57712_MF/57800/57800_MF/57810/57810_MF/"
 		   "57840/57840_MF Driver");
@@ -163,27 +165,27 @@ enum bnx2x_board_type {
 static struct {
 	char *name;
 } board_info[] = {
-	[BCM57710]	= { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
-	[BCM57711]	= { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
-	[BCM57711E]	= { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
-	[BCM57712]	= { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
-	[BCM57712_MF]	= { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
-	[BCM57712_VF]	= { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" },
-	[BCM57800]	= { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
-	[BCM57800_MF]	= { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
-	[BCM57800_VF]	= { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" },
-	[BCM57810]	= { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
-	[BCM57810_MF]	= { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
-	[BCM57810_VF]	= { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" },
-	[BCM57840_4_10]	= { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
-	[BCM57840_2_20]	= { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
-	[BCM57840_MF]	= { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
-	[BCM57840_VF]	= { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" },
-	[BCM57811]	= { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" },
-	[BCM57811_MF]	= { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" },
-	[BCM57840_O]	= { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
-	[BCM57840_MFO]	= { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
-	[BCM57811_VF]	= { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }
+	[BCM57710]	= { "QLogic BCM57710 10 Gigabit PCIe [Everest]" },
+	[BCM57711]	= { "QLogic BCM57711 10 Gigabit PCIe" },
+	[BCM57711E]	= { "QLogic BCM57711E 10 Gigabit PCIe" },
+	[BCM57712]	= { "QLogic BCM57712 10 Gigabit Ethernet" },
+	[BCM57712_MF]	= { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" },
+	[BCM57712_VF]	= { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" },
+	[BCM57800]	= { "QLogic BCM57800 10 Gigabit Ethernet" },
+	[BCM57800_MF]	= { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" },
+	[BCM57800_VF]	= { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" },
+	[BCM57810]	= { "QLogic BCM57810 10 Gigabit Ethernet" },
+	[BCM57810_MF]	= { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" },
+	[BCM57810_VF]	= { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" },
+	[BCM57840_4_10]	= { "QLogic BCM57840 10 Gigabit Ethernet" },
+	[BCM57840_2_20]	= { "QLogic BCM57840 20 Gigabit Ethernet" },
+	[BCM57840_MF]	= { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
+	[BCM57840_VF]	= { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" },
+	[BCM57811]	= { "QLogic BCM57811 10 Gigabit Ethernet" },
+	[BCM57811_MF]	= { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" },
+	[BCM57840_O]	= { "QLogic BCM57840 10/20 Gigabit Ethernet" },
+	[BCM57840_MFO]	= { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
+	[BCM57811_VF]	= { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }
 };
 
 #ifndef PCI_DEVICE_ID_NX2_57710
@@ -2916,7 +2918,7 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
 	func_params.f_obj = &bp->func_obj;
 	func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
 
-	if (IS_MF_UFP(bp)) {
+	if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
 		int func = BP_ABS_FUNC(bp);
 		u32 val;
 
@@ -2943,16 +2945,16 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
 			BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
 				  bp->mf_ov);
 			goto fail;
+		} else {
+			DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n",
+			   bp->mf_ov);
 		}
-
-		DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov);
-
-		bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
-
-		return;
+	} else {
+		goto fail;
 	}
 
-	/* not supported by SW yet */
+	bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
+	return;
 fail:
 	bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
 }
@@ -3707,6 +3709,34 @@ void bnx2x_update_mng_version(struct bnx2x *bp)
 	   ethver, iscsiver, fcoever);
 }
 
+void bnx2x_update_mfw_dump(struct bnx2x *bp)
+{
+	struct timeval epoc;
+	u32 drv_ver;
+	u32 valid_dump;
+
+	if (!SHMEM2_HAS(bp, drv_info))
+		return;
+
+	/* Update Driver load time */
+	do_gettimeofday(&epoc);
+	SHMEM2_WR(bp, drv_info.epoc, epoc.tv_sec);
+
+	drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
+	SHMEM2_WR(bp, drv_info.drv_ver, drv_ver);
+
+	SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM));
+
+	/* Check & notify On-Chip dump. */
+	valid_dump = SHMEM2_RD(bp, drv_info.valid_dump);
+
+	if (valid_dump & FIRST_DUMP_VALID)
+		DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n");
+
+	if (valid_dump & SECOND_DUMP_VALID)
+		DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n");
+}
+
 static void bnx2x_oem_event(struct bnx2x *bp, u32 event)
 {
 	u32 cmd_ok, cmd_fail;
@@ -5568,6 +5598,8 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 		      BNX2X_STATE_OPEN):
 		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
 		      BNX2X_STATE_OPENING_WAIT4_PORT):
+		case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
+		      BNX2X_STATE_CLOSING_WAIT4_HALT):
 			cid = elem->message.data.eth_event.echo &
 				BNX2X_SWCID_MASK;
 			DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
@@ -7429,6 +7461,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
 	} else
 		BNX2X_ERR("Bootcode is missing - can not initialize link\n");
 
+	if (SHMEM2_HAS(bp, netproc_fw_ver))
+		SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM));
+
 	return 0;
 }
 
@@ -11678,7 +11713,7 @@ static void validate_set_si_mode(struct bnx2x *bp)
 static int bnx2x_get_hwinfo(struct bnx2x *bp)
 {
 	int /*abs*/func = BP_ABS_FUNC(bp);
-	int vn;
+	int vn, mfw_vn;
 	u32 val = 0, val2 = 0;
 	int rc = 0;
 
@@ -11768,6 +11803,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 	bp->mf_mode = 0;
 	bp->mf_sub_mode = 0;
 	vn = BP_VN(bp);
+	mfw_vn = BP_FW_MB_IDX(bp);
 
 	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
 		BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
@@ -11824,6 +11860,31 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 				} else
 					BNX2X_DEV_INFO("illegal OV for SD\n");
 				break;
+			case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE:
+				bp->mf_mode = MULTI_FUNCTION_SD;
+				bp->mf_sub_mode = SUB_MF_MODE_BD;
+				bp->mf_config[vn] =
+					MF_CFG_RD(bp,
+						  func_mf_config[func].config);
+
+				if (SHMEM2_HAS(bp, mtu_size)) {
+					int mtu_idx = BP_FW_MB_IDX(bp);
+					u16 mtu_size;
+					u32 mtu;
+
+					mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]);
+					mtu_size = (u16)mtu;
+					DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n",
+					   mtu_size, mtu);
+
+					/* if valid: update device mtu */
+					if (((mtu_size + ETH_HLEN) >=
+					     ETH_MIN_PACKET_SIZE) &&
+					    (mtu_size <=
+					     ETH_MAX_JUMBO_PACKET_SIZE))
+						bp->dev->mtu = mtu_size;
+				}
+				break;
 			case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
 				bp->mf_mode = MULTI_FUNCTION_SD;
 				bp->mf_sub_mode = SUB_MF_MODE_UFP;
@@ -11871,9 +11932,10 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 
 				BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
 					       func, bp->mf_ov, bp->mf_ov);
-			} else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) {
+			} else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) ||
+				   (bp->mf_sub_mode == SUB_MF_MODE_BD)) {
 				dev_err(&bp->pdev->dev,
-					"Unexpected - no valid MF OV for func %d in UFP mode\n",
+					"Unexpected - no valid MF OV for func %d in UFP/BD mode\n",
 					func);
 				bp->path_has_ovlan = true;
 			} else {
@@ -13561,6 +13623,9 @@ static int bnx2x_init_one(struct pci_dev *pdev,
 
 	bnx2x_register_phc(bp);
 
+	if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+		bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
+
 	return 0;
 
 init_one_exit:
@@ -13623,6 +13688,7 @@ static void __bnx2x_remove(struct pci_dev *pdev,
 	/* Power on: we can't let PCI layer write to us while we are in D3 */
 	if (IS_PF(bp)) {
 		bnx2x_set_power_state(bp, PCI_D0);
+		bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED);
 
 		/* Set endianity registers to reset values in case next driver
 		 * boots in different endianty environment.

drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h

-/* bnx2x_mfw_req.h: Broadcom Everest network driver.
+/* bnx2x_mfw_req.h: Qlogic Everest network driver.
  *
  * Copyright (c) 2012-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h

-/* bnx2x_reg.h: Broadcom Everest network driver.
+/* bnx2x_reg.h: Qlogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -2137,6 +2139,10 @@
 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
    e1hov */
 #define NIG_REG_LLH_E1HOV_MODE					 0x160d8
+/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
+ * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
+ */
+#define NIG_REG_LLH_E1HOV_TYPE_1				 0x16028
 /* [RW 1] When this bit is set; the LLH will classify the packet before
    sending it to the BRB or calculating WoL on it. */
 #define NIG_REG_LLH_MF_MODE					 0x16024
@@ -2953,7 +2959,12 @@
 #define PBF_REG_TQ_OCCUPANCY_Q0					 0x1403ac
 /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
 #define PBF_REG_TQ_OCCUPANCY_Q1					 0x1403b0
-#define PB_REG_CONTROL						 0
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PBF_REG_VLAN_TYPE_0					 0x15c06c
 /* [RW 2] Interrupt mask register #0 read/write */
 #define PB_REG_PB_INT_MASK					 0x28
 /* [R 2] Interrupt register #0 read */
@@ -3372,6 +3383,12 @@
 #define PRS_REG_TCM_CURRENT_CREDIT				 0x40160
 /* [R 8] debug only: TSDM current credit. Transaction based. */
 #define PRS_REG_TSDM_CURRENT_CREDIT				 0x4015c
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PRS_REG_VLAN_TYPE_0					 0x401a8
 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT			 (0x1<<19)
 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF			 (0x1<<20)
 #define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN			 (0x1<<22)
@@ -7240,6 +7257,9 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL	0xffe0
 #define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G	0x40
 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS	0xffe1
+#define MDIO_AN_REG_848xx_ID_MSB		0xffe2
+#define BCM84858_PHY_ID					0x600d
+#define MDIO_AN_REG_848xx_ID_LSB		0xffe3
 #define MDIO_AN_REG_8481_LEGACY_AN_ADV		0xffe4
 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION	0xffe6
 #define MDIO_AN_REG_8481_1000T_CTRL		0xffe9
@@ -7283,31 +7303,31 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_84833_TOP_CFG_FW_NO_EEE		0x1f81
 #define MDIO_84833_TOP_CFG_XGPHY_STRAP1			0x401a
 #define MDIO_84833_SUPER_ISOLATE		0x8000
-/* These are mailbox register set used by 84833. */
-#define MDIO_84833_TOP_CFG_SCRATCH_REG0			0x4005
-#define MDIO_84833_TOP_CFG_SCRATCH_REG1			0x4006
-#define MDIO_84833_TOP_CFG_SCRATCH_REG2			0x4007
-#define MDIO_84833_TOP_CFG_SCRATCH_REG3			0x4008
-#define MDIO_84833_TOP_CFG_SCRATCH_REG4			0x4009
-#define MDIO_84833_TOP_CFG_SCRATCH_REG26		0x4037
-#define MDIO_84833_TOP_CFG_SCRATCH_REG27		0x4038
-#define MDIO_84833_TOP_CFG_SCRATCH_REG28		0x4039
-#define MDIO_84833_TOP_CFG_SCRATCH_REG29		0x403a
-#define MDIO_84833_TOP_CFG_SCRATCH_REG30		0x403b
-#define MDIO_84833_TOP_CFG_SCRATCH_REG31		0x403c
-#define MDIO_84833_CMD_HDLR_COMMAND	MDIO_84833_TOP_CFG_SCRATCH_REG0
-#define MDIO_84833_CMD_HDLR_STATUS	MDIO_84833_TOP_CFG_SCRATCH_REG26
-#define MDIO_84833_CMD_HDLR_DATA1	MDIO_84833_TOP_CFG_SCRATCH_REG27
-#define MDIO_84833_CMD_HDLR_DATA2	MDIO_84833_TOP_CFG_SCRATCH_REG28
-#define MDIO_84833_CMD_HDLR_DATA3	MDIO_84833_TOP_CFG_SCRATCH_REG29
-#define MDIO_84833_CMD_HDLR_DATA4	MDIO_84833_TOP_CFG_SCRATCH_REG30
-#define MDIO_84833_CMD_HDLR_DATA5	MDIO_84833_TOP_CFG_SCRATCH_REG31
+/* These are mailbox register set used by 84833/84858. */
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG0			0x4005
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG1			0x4006
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG2			0x4007
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG3			0x4008
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG4			0x4009
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG26		0x4037
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG27		0x4038
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG28		0x4039
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG29		0x403a
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG30		0x403b
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG31		0x403c
+#define MDIO_848xx_CMD_HDLR_COMMAND	(MDIO_848xx_TOP_CFG_SCRATCH_REG0)
+#define MDIO_848xx_CMD_HDLR_STATUS	(MDIO_848xx_TOP_CFG_SCRATCH_REG26)
+#define MDIO_848xx_CMD_HDLR_DATA1	(MDIO_848xx_TOP_CFG_SCRATCH_REG27)
+#define MDIO_848xx_CMD_HDLR_DATA2	(MDIO_848xx_TOP_CFG_SCRATCH_REG28)
+#define MDIO_848xx_CMD_HDLR_DATA3	(MDIO_848xx_TOP_CFG_SCRATCH_REG29)
+#define MDIO_848xx_CMD_HDLR_DATA4	(MDIO_848xx_TOP_CFG_SCRATCH_REG30)
+#define MDIO_848xx_CMD_HDLR_DATA5	(MDIO_848xx_TOP_CFG_SCRATCH_REG31)
 
-/* Mailbox command set used by 84833. */
-#define PHY84833_CMD_SET_PAIR_SWAP			0x8001
-#define PHY84833_CMD_GET_EEE_MODE			0x8008
-#define PHY84833_CMD_SET_EEE_MODE			0x8009
-/* Mailbox status set used by 84833. */
+/* Mailbox command set used by 84833/84858 */
+#define PHY848xx_CMD_SET_PAIR_SWAP			0x8001
+#define PHY848xx_CMD_GET_EEE_MODE			0x8008
+#define PHY848xx_CMD_SET_EEE_MODE			0x8009
+/* Mailbox status set used by 84833 only */
 #define PHY84833_STATUS_CMD_RECEIVED			0x0001
 #define PHY84833_STATUS_CMD_IN_PROGRESS			0x0002
 #define PHY84833_STATUS_CMD_COMPLETE_PASS		0x0004
@@ -7318,6 +7338,13 @@ Theotherbitsarereservedandshouldbezero*/
 #define PHY84833_STATUS_CMD_CLEAR_COMPLETE		0x0080
 #define PHY84833_STATUS_CMD_OPEN_OVERRIDE		0xa5a5
 
+/* Mailbox status set used by 84858 only */
+#define PHY84858_STATUS_CMD_RECEIVED			0x0001
+#define PHY84858_STATUS_CMD_IN_PROGRESS			0x0002
+#define PHY84858_STATUS_CMD_COMPLETE_PASS		0x0004
+#define PHY84858_STATUS_CMD_COMPLETE_ERROR		0x0008
+#define PHY84858_STATUS_CMD_SYSTEM_BUSY			0xbbbb
+
 
 /* Warpcore clause 45 addressing */
 #define MDIO_WC_DEVAD					0x3

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

-/* bnx2x_sp.c: Broadcom Everest network driver.
+/* bnx2x_sp.c: Qlogic Everest network driver.
  *
- * Copyright (c) 2011-2013 Broadcom Corporation
+ * Copyright 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and Qlogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@@ -4060,8 +4062,14 @@ static int bnx2x_setup_rss(struct bnx2x *bp,
 	if (test_bit(BNX2X_RSS_IPV6_UDP, &p->rss_flags))
 		caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY;
 
-	if (test_bit(BNX2X_RSS_GRE_INNER_HDRS, &p->rss_flags))
-		caps |= ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY;
+	if (test_bit(BNX2X_RSS_IPV4_VXLAN, &p->rss_flags))
+		caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_VXLAN_CAPABILITY;
+
+	if (test_bit(BNX2X_RSS_IPV6_VXLAN, &p->rss_flags))
+		caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY;
+
+	if (test_bit(BNX2X_RSS_TUNN_INNER_HDRS, &p->rss_flags))
+		caps |= ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY;
 
 	/* RSS keys */
 	if (test_bit(BNX2X_RSS_SET_SRCH, &p->rss_flags)) {
@@ -5669,10 +5677,14 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
 	rdata->sd_vlan_tag	= cpu_to_le16(start_params->sd_vlan_tag);
 	rdata->path_id		= BP_PATH(bp);
 	rdata->network_cos_mode	= start_params->network_cos_mode;
-	rdata->tunnel_mode	= start_params->tunnel_mode;
-	rdata->gre_tunnel_type	= start_params->gre_tunnel_type;
-	rdata->inner_gre_rss_en = start_params->inner_gre_rss_en;
-	rdata->vxlan_dst_port	= cpu_to_le16(4789);
+
+	rdata->vxlan_dst_port	= cpu_to_le16(start_params->vxlan_dst_port);
+	rdata->geneve_dst_port	= cpu_to_le16(start_params->geneve_dst_port);
+	rdata->inner_clss_l2gre	= start_params->inner_clss_l2gre;
+	rdata->inner_clss_l2geneve = start_params->inner_clss_l2geneve;
+	rdata->inner_clss_vxlan	= start_params->inner_clss_vxlan;
+	rdata->inner_rss	= start_params->inner_rss;
+
 	rdata->sd_accept_mf_clss_fail = start_params->class_fail;
 	if (start_params->class_fail_ethtype) {
 		rdata->sd_accept_mf_clss_fail_match_ethtype = 1;
@@ -5690,6 +5702,14 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
 			cpu_to_le16(0x8100);
 
 	rdata->no_added_tags = start_params->no_added_tags;
+
+	rdata->c2s_pri_tt_valid = start_params->c2s_pri_valid;
+	if (rdata->c2s_pri_tt_valid) {
+		memcpy(rdata->c2s_pri_trans_table.val,
+		       start_params->c2s_pri,
+		       MAX_VLAN_PRIORITIES);
+		rdata->c2s_pri_default = start_params->c2s_pri_default;
+	}
 	/* No need for an explicit memory barrier here as long we would
 	 * need to ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory
@@ -5750,15 +5770,22 @@ static inline int bnx2x_func_send_switch_update(struct bnx2x *bp,
 	if (test_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
 		     &switch_update_params->changes)) {
 		rdata->update_tunn_cfg_flg = 1;
-		if (test_bit(BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
+		if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
+			     &switch_update_params->changes))
+			rdata->inner_clss_l2gre = 1;
+		if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
+			     &switch_update_params->changes))
+			rdata->inner_clss_vxlan = 1;
+		if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
 			     &switch_update_params->changes))
-			rdata->tunn_clss_en = 1;
-		if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
+			rdata->inner_clss_l2geneve = 1;
+		if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
 			     &switch_update_params->changes))
-			rdata->inner_gre_rss_en = 1;
-		rdata->tunnel_mode = switch_update_params->tunnel_mode;
-		rdata->gre_tunnel_type = switch_update_params->gre_tunnel_type;
-		rdata->vxlan_dst_port = cpu_to_le16(4789);
+			rdata->inner_rss = 1;
+		rdata->vxlan_dst_port =
+			cpu_to_le16(switch_update_params->vxlan_dst_port);
+		rdata->geneve_dst_port =
+			cpu_to_le16(switch_update_params->geneve_dst_port);
 	}
 
 	rdata->echo = SWITCH_UPDATE;
@@ -5885,6 +5912,8 @@ static inline int bnx2x_func_send_tx_start(struct bnx2x *bp,
 		rdata->traffic_type_to_priority_cos[i] =
 			tx_start_params->traffic_type_to_priority_cos[i];
 
+	for (i = 0; i < MAX_TRAFFIC_TYPES; i++)
+		rdata->dcb_outer_pri[i] = tx_start_params->dcb_outer_pri[i];
 	/* No need for an explicit memory barrier here as long as we
 	 * ensure the ordering of writing to the SPQ element
 	 * and updating of the SPQ producer which involves a memory

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h

-/* bnx2x_sp.h: Broadcom Everest network driver.
+/* bnx2x_sp.h: Qlogic Everest network driver.
  *
- * Copyright (c) 2011-2013 Broadcom Corporation
+ * Copyright 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and Qlogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@@ -711,7 +713,10 @@ enum {
 	BNX2X_RSS_IPV6,
 	BNX2X_RSS_IPV6_TCP,
 	BNX2X_RSS_IPV6_UDP,
-	BNX2X_RSS_GRE_INNER_HDRS,
+
+	BNX2X_RSS_IPV4_VXLAN,
+	BNX2X_RSS_IPV6_VXLAN,
+	BNX2X_RSS_TUNN_INNER_HDRS,
 };
 
 struct bnx2x_config_rss_params {
@@ -1105,8 +1110,10 @@ enum {
 	BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
 	BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
 	BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
-	BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
-	BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
+	BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
+	BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
+	BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
+	BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
 };
 
 /* Allowed Function states */
@@ -1171,19 +1178,23 @@ struct bnx2x_func_start_params {
 	/* Function cos mode */
 	u8 network_cos_mode;
 
-	/* TUNN_MODE_NONE/TUNN_MODE_VXLAN/TUNN_MODE_GRE */
-	u8 tunnel_mode;
+	/* UDP dest port for VXLAN */
+	u16 vxlan_dst_port;
 
-	/* tunneling classification enablement */
-	u8 tunn_clss_en;
+	/* UDP dest port for Geneve */
+	u16 geneve_dst_port;
 
-	/* NVGRE_TUNNEL/L2GRE_TUNNEL/IPGRE_TUNNEL */
-	u8 gre_tunnel_type;
+	/* Enable inner Rx classifications for L2GRE packets */
+	u8 inner_clss_l2gre;
 
-	/* Enables Inner GRE RSS on the function, depends on the client RSS
-	 * capailities
-	 */
-	u8 inner_gre_rss_en;
+	/* Enable inner Rx classifications for L2-Geneve packets */
+	u8 inner_clss_l2geneve;
+
+	/* Enable inner Rx classification for vxlan packets */
+	u8 inner_clss_vxlan;
+
+	/* Enable RSS according to inner header */
+	u8 inner_rss;
 
 	/* Allows accepting of packets failing MF classification, possibly
 	 * only matching a given ethertype
@@ -1200,6 +1211,11 @@ struct bnx2x_func_start_params {
 
 	/* Prevent inner vlans from being added by FW */
 	u8 no_added_tags;
+
+	/* Inner-to-Outer vlan priority mapping */
+	u8 c2s_pri[MAX_VLAN_PRIORITIES];
+	u8 c2s_pri_default;
+	u8 c2s_pri_valid;
 };
 
 struct bnx2x_func_switch_update_params {
@@ -1207,8 +1223,8 @@ struct bnx2x_func_switch_update_params {
 	u16 vlan;
 	u16 vlan_eth_type;
 	u8 vlan_force_prio;
-	u8 tunnel_mode;
-	u8 gre_tunnel_type;
+	u16 vxlan_dst_port;
+	u16 geneve_dst_port;
 };
 
 struct bnx2x_func_afex_update_params {
@@ -1229,6 +1245,7 @@ struct bnx2x_func_tx_start_params {
 	u8 dcb_enabled;
 	u8 dcb_version;
 	u8 dont_add_pri_0_en;
+	u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
 };
 
 struct bnx2x_func_set_timesync_params {

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

-/* bnx2x_sriov.c: Broadcom Everest network driver.
+/* bnx2x_sriov.c: QLogic Everest network driver.
  *
  * Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@@ -1338,6 +1340,9 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 
 	mutex_init(&bp->vfdb->bulletin_mutex);
 
+	if (SHMEM2_HAS(bp, sriov_switch_mode))
+		SHMEM2_WR(bp, sriov_switch_mode, SRIOV_SWITCH_MODE_VEB);
+
 	return 0;
 failed:
 	DP(BNX2X_MSG_IOV, "Failed err=%d\n", err);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h

-/* bnx2x_sriov.h: Broadcom Everest network driver.
+/* bnx2x_sriov.h: QLogic Everest network driver.
  *
  * Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c

-/* bnx2x_stats.c: Broadcom Everest network driver.
+/* bnx2x_stats.c: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h

-/* bnx2x_stats.h: Broadcom Everest network driver.
+/* bnx2x_stats.h: QLogic Everest network driver.
  *
  * Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c

-/* bnx2x_vfpf.c: Broadcom Everest network driver.
+/* bnx2x_vfpf.c: QLogic Everest network driver.
  *
  * Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
  * under the terms of the GNU General Public License version 2, available
  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
  *
  * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
  * consent.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h

-/* bnx2x_vfpf.h: Broadcom Everest network driver.
+/* bnx2x_vfpf.h: Qlogic Everest network driver.
  *
  * Copyright (c) 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
  *
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and Qlogic execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
- * under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * under the terms of the GNU General Public License version 2 (the “GPL”),
+ * available at http://www.gnu.org/licenses/gpl-2.0.html, with the following
+ * added to such license:
  *
- * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
- * consent.
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions
+ * of the license of that module.  An independent module is a module which is
+ * not derived from this software.  The special exception does not apply to any
+ * modifications of the software.
  *
  * Maintained by: Ariel Elior <ariel.elior@qlogic.com>
  * Written by: Ariel Elior <ariel.elior@qlogic.com>