[ALPHA] Makefile cleanup from Sam Ravnborg <sam@ravnborg.org>.

70f72acb · Richard Henderson · 42ca459a · 70f72acb · 70f72acb · 70f72acb
Commit 70f72acb authored Jan 02, 2003 by Richard Henderson
4 changed files
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -10,13 +10,17 @@

 NM := $(NM) -B

-LDFLAGS_vmlinux = -static -N #-relax
-CFLAGS := $(CFLAGS) -pipe -mno-fp-regs -ffixed-8
-LDFLAGS_BLOB := --format binary --oformat elf64-alpha
+LDFLAGS_vmlinux	:= -static -N #-relax
+LDFLAGS_BLOB	:= --format binary --oformat elf64-alpha
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8

 # Determine if we can use the BWX instructions with GAS.
 old_gas := $(shell if $(AS) --version 2>&1 | grep 'version 2.7' > /dev/null; then echo y; else echo n; fi)

+ifeq ($(old_gas),y)
+$(error The assembler '$(AS)' does not support the BWX instruction)
+endif
+
 # Determine if GCC understands the -mcpu= option.
 have_mcpu := $(shell if $(CC) -mcpu=ev5 -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo y; else echo n; fi)

@@ -27,68 +31,64 @@ have_mcpu_ev6 := $(shell if $(CC) -mcpu=ev6 -S -o /dev/null -xc /dev/null > /dev
 have_mcpu_ev67 := $(shell if $(CC) -mcpu=ev67 -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo y; else echo n; fi)

 have_msmall_data := $(shell if $(CC) -msmall-data -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo y; else echo n; fi)
-ifeq ($(have_msmall_data),y)
-  CFLAGS := $(CFLAGS) -msmall-data
-endif
+
+cflags-$(have_msmall_data) += -msmall-data

 # Turn on the proper cpu optimizations.
 ifeq ($(have_mcpu),y)
+  mcpu_done := n
  # If GENERIC, make sure to turn off any instruction set extensions that
  # the host compiler might have on by default.  Given that EV4 and EV5
  # have the same instruction set, prefer EV5 because an EV5 schedule is
  # more likely to keep an EV4 processor busy than vice-versa.
-  mcpu_done := n
  ifeq ($(CONFIG_ALPHA_GENERIC),y)
-    CFLAGS := $(CFLAGS) -mcpu=ev5
+    mcpu := ev5
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_SX164)$(have_mcpu_pca56),nyy)
-    CFLAGS := $(CFLAGS) -mcpu=pca56
+    mcpu := pca56
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_POLARIS)$(have_mcpu_pca56),nyy)
-    CFLAGS := $(CFLAGS) -mcpu=pca56
+    mcpu := pca56
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_EV4),ny)
-    CFLAGS := $(CFLAGS) -mcpu=ev4
+    mcpu := ev4
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_EV56),ny)
-    CFLAGS := $(CFLAGS) -mcpu=ev56
+    mcpu := ev56
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_EV5),ny)
-    CFLAGS := $(CFLAGS) -mcpu=ev5
+    mcpu := ev5
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_EV67)$(have_mcpu_ev67),nyy)
-    CFLAGS := $(CFLAGS) -mcpu=ev67
+    mcpu := ev67
    mcpu_done := y
  endif
  ifeq ($(mcpu_done)$(CONFIG_ALPHA_EV6),ny)
    ifeq ($(have_mcpu_ev6),y)
-      CFLAGS := $(CFLAGS) -mcpu=ev6
+      mcpu := ev6
    else
      ifeq ($(have_mcpu_pca56),y)
-        CFLAGS := $(CFLAGS) -mcpu=pca56
+        mcpu := pca56
      else
-        CFLAGS := $(CFLAGS) -mcpu=ev56
+        mcpu=ev56
      endif
    endif
    mcpu_done := y
  endif
+  cflags-$(mcpu_done) += -mcpu=$(mcpu)
 endif

+
 # For TSUNAMI, we must have the assembler not emulate our instructions.
 # The same is true for IRONGATE, POLARIS, PYXIS.
 # BWX is most important, but we don't really want any emulation ever.
-
-ifeq ($(old_gas),y)
-  # How do we do #error in make?
-  CFLAGS := --error-please-upgrade-your-assembler
-endif
-CFLAGS := $(CFLAGS) -Wa,-mev6
+CFLAGS += $(cflags-y) -Wa,-mev6

 HEAD := arch/alpha/kernel/head.o

@@ -96,37 +96,16 @@ core-y			+= arch/alpha/kernel/ arch/alpha/mm/
 core-$(CONFIG_MATHEMU)  += arch/alpha/math-emu/
 libs-y			+= arch/alpha/lib/

-export libs-y
-
-MAKEBOOT = $(MAKE) -C arch/alpha/boot
+boot := arch/alpha/boot

-rawboot:	vmlinux
-	@$(MAKEBOOT) rawboot
+#Default target when executing make with no arguments
+all boot: $(boot)/vmlinux.gz

-boot:	vmlinux
-	@$(MAKEBOOT)
+$(boot)/vmlinux.gz: vmlinux
+	$(Q)$(MAKE) -f scripts/Makefile.build obj=$(boot) $@

-#
-# My boot writes directly to a specific disk partition, I doubt most
-# people will want to do that without changes..
-#
-msb my-special-boot:	vmlinux
-	@$(MAKEBOOT) msb
-
-bootimage:	vmlinux
-	@$(MAKEBOOT) bootimage
-
-srmboot:	vmlinux
-	@$(MAKEBOOT) srmboot
-
-archclean:
-	@$(MAKEBOOT) clean
-
-archmrproper:
-	rm -f include/asm-alpha/asm_offsets.h
-
-bootpfile:	vmlinux
-	@$(MAKEBOOT) bootpfile
+bootimage bootpfile: vmlinux
+	$(Q)$(MAKE) -f scripts/Makefile.build obj=$(boot) $(boot)/$@


 prepare: include/asm-$(ARCH)/asm_offsets.h
@@ -134,12 +113,19 @@ prepare: include/asm-$(ARCH)/asm_offsets.h
 arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
 				   include/config/MARKER

-include/asm-$(ARCH)/asm_offsets.h.tmp: arch/$(ARCH)/kernel/asm-offsets.s
-	@$(generate-asm-offsets.h) < $< > $@
-
-include/asm-$(ARCH)/asm_offsets.h: include/asm-$(ARCH)/asm_offsets.h.tmp
+include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
 	@echo -n '  Generating $@'
+	@$(generate-asm-offsets.h) < $< > $@.tmp
 	@$(update-if-changed)

+archclean:
+	$(Q)$(MAKE) -f scripts/Makefile.clean obj=$(boot)
+
 CLEAN_FILES += include/asm-$(ARCH)/offset.h.tmp \
 	       include/asm-$(ARCH)/offset.h
+
+define archhelp
+  echo '* boot		- Compressed kernel image (arch/alpha/boot/vmlinux.gz)'
+  echo '  bootimage	- SRM bootable image (arch/alpha/boot/bootimage)'
+  echo '  bootpfile	- BOOTP bootable image (arch/alpha/boot/bootpfile)'
+endef
--- a/arch/alpha/boot/Makefile
+++ b/arch/alpha/boot/Makefile
@@ -8,58 +8,35 @@
 # Copyright (C) 1994 by Linus Torvalds
 #

-LINKFLAGS = -static -T bootloader.lds -uvsprintf #-N -relax
-
-CFLAGS := $(CFLAGS) -I$(TOPDIR)/include
-
-.S.s:
-	$(CPP) $(AFLAGS) -traditional -o $*.o $<
-.S.o:
-	$(CC) $(AFLAGS) -traditional -c -o $*.o $<
-
-OBJECTS = head.o main.o
-BPOBJECTS = head.o bootp.o
-TARGETS = vmlinux.gz tools/objstrip # also needed by aboot & milo
-VMLINUX = $(TOPDIR)/vmlinux
-OBJSTRIP = tools/objstrip
-LIBS := $(addprefix $(TOPDIR)/,$(libs-y))
-
-all:	$(TARGETS)
-	@echo Ready to install kernel in $(shell pwd)/vmlinux.gz
-
-# normally no need to build these:
-rawboot: vmlinux.nh tools/lxboot tools/bootlx
-
-msb:	tools/lxboot tools/bootlx vmlinux.nh
-	( cat tools/lxboot tools/bootlx vmlinux.nh ) > /dev/rz0a
-	disklabel -rw rz0 'linux' tools/lxboot tools/bootlx
-
-bootimage:	tools/mkbb tools/lxboot tools/bootlx vmlinux.nh
-	( cat tools/lxboot tools/bootlx vmlinux.nh ) > bootimage
-	tools/mkbb bootimage tools/lxboot
-
-bootpfile:	tools/bootph vmlinux.nh
-	cat tools/bootph vmlinux.nh > bootpfile
+host-progs	:= tools/mkbb tools/objstrip
+EXTRA_TARGETS	:= vmlinux.gz vmlinux \
+		   vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
+		   bootloader bootpheader 
+OBJSTRIP	:= $(obj)/tools/objstrip
+
+# SRM bootable image.  Copy to offset 512 of a partition.
+$(obj)/bootimage: $(addprefix $(obj)/tools/,mkbb lxboot bootlx) $(obj)/vmlinux.nh
+	( cat $(obj)/tools/lxboot $(obj)/tools/bootlx $(obj)/vmlinux.nh ) > $@ 
+	$(obj)/tools/mkbb $@ $(obj)/tools/lxboot
+	@echo '  Bootimage $@ is ready'
+
+# BOOTP bootable image.  Define INITRD during make to append initrd image.
+$(obj)/bootpfile: $(obj)/tools/bootph $(obj)/vmlinux.nh
+	cat $(obj)/tools/bootph $(obj)/vmlinux.nh > $@
 ifdef INITRD
-	cat $(INITRD) >> bootpfile
+	cat $(INITRD) >> $@
 endif

-srmboot:	bootdevice bootimage
-	dd if=bootimage of=$(BOOTDEV) bs=512 seek=1 skip=1
-	tools/mkbb $(BOOTDEV) tools/lxboot
-
-bootdevice:
-	@test "$(BOOTDEV)" != ""  || (echo You must specify BOOTDEV ; exit -1)
-
-vmlinux.gz: vmlinux
-	gzip -fv9 vmlinux
+# Compressed kernel image
+$(obj)/vmlinux.gz: $(obj)/vmlinux FORCE
+	$(call if_changed,gzip)
+	@echo '  Kernel $@ is ready'

-main.o: ksize.h
+$(obj)/main.o: $(obj)/ksize.h
+$(obj)/bootp.o: $(obj)/ksize.h

-bootp.o: ksize.h
-
-ksize.h: vmlinux.nh FORCE
-	echo "#define KERNEL_SIZE `ls -l vmlinux.nh | awk '{print $$5}'`" > $@T
+$(obj)/ksize.h: $(obj)/vmlinux.nh FORCE
+	echo "#define KERNEL_SIZE `ls -l $(obj)/vmlinux.nh | awk '{print $$5}'`" > $@T
 ifdef INITRD
 	[ -f $(INITRD) ] || exit 1
 	echo "#define INITRD_IMAGE_SIZE `ls -l $(INITRD) | awk '{print $$5}'`" >> $@T
@@ -67,36 +44,36 @@ endif
 	cmp -s $@T $@ || mv -f $@T $@
 	rm -f $@T

-vmlinux.nh: $(VMLINUX) $(OBJSTRIP)
-	$(OBJSTRIP) -v $(VMLINUX) vmlinux.nh
-
-vmlinux: $(TOPDIR)/vmlinux
-	$(STRIP) -o vmlinux $(VMLINUX)
-
-tools/lxboot: $(OBJSTRIP) bootloader
-	$(OBJSTRIP) -p bootloader tools/lxboot
+quiet_cmd_strip = STRIP  $@
+      cmd_strip = $(STRIP) -o $@ $<
+$(obj)/vmlinux: vmlinux FORCE
+	$(call if_changed,strip)

-tools/bootlx: bootloader $(OBJSTRIP)
-	$(OBJSTRIP) -vb bootloader tools/bootlx
+quiet_cmd_objstrip = OBJSTRIP $@
+      cmd_objstrip = $(OBJSTRIP) $(OSFLAGS_$(@F)) $< $@

-tools/bootph: bootpheader $(OBJSTRIP)
-	$(OBJSTRIP) -vb bootpheader tools/bootph
+OSFLAGS_vmlinux.nh	:= -v
+OSFLAGS_lxboot		:= -p
+OSFLAGS_bootlx		:= -vb
+OSFLAGS_bootph		:= -vb

-$(OBJSTRIP): $(OBJSTRIP).c
-	$(HOSTCC) $(HOSTCFLAGS) $< -o $@
+$(obj)/vmlinux.nh: vmlinux $(OBJSTRIP) FORCE
+	$(call if_changed,objstrip)
+	
+$(obj)/tools/lxboot: $(obj)/bootloader $(OBJSTRIP) FORCE
+	$(call if_changed,objstrip)

-tools/mkbb: tools/mkbb.c
-	$(HOSTCC) tools/mkbb.c -o tools/mkbb
+$(obj)/tools/bootlx: $(obj)/bootloader $(OBJSTRIP) FORCE
+	$(call if_changed,objstrip)

-bootloader: $(OBJECTS)
-	$(LD) $(LINKFLAGS) $(OBJECTS) $(LIBS) -o bootloader
+$(obj)/tools/bootph: $(obj)/bootpheader $(OBJSTRIP) FORCE
+	$(call if_changed,objstrip)

-bootpheader: $(BPOBJECTS)
-	$(LD) $(LINKFLAGS) $(BPOBJECTS) $(LIBS) -o bootpheader
+LDFLAGS_bootloader  := -static -uvsprintf -T  #-N -relax
+LDFLAGS_bootpheader := -static -uvsprintf -T  #-N -relax

-clean:
-	rm -f $(TARGETS) bootloader bootimage bootpfile bootpheader
-	rm -f tools/mkbb tools/bootlx tools/lxboot tools/bootph
-	rm -f vmlinux.nh ksize.h
+$(obj)/bootloader: $(obj)/bootloader.lds $(obj)/head.o $(obj)/main.o FORCE
+	$(call if_changed,ld)

-FORCE:
+$(obj)/bootpheader: $(obj)/bootloader.lds $(obj)/head.o $(obj)/bootp.o FORCE
+	$(call if_changed,ld)
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -7,58 +7,53 @@ L_TARGET := lib.a

 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
-ev6 :=
-ifeq ($(CONFIG_ALPHA_EV6),y)
-  ev6 := ev6-
-endif
+ev6-$(CONFIG_ALPHA_EV6) := ev6-

 # Several make use of the cttz instruction introduced in ev67.
-ev67 :=
-ifeq ($(CONFIG_ALPHA_EV67),y)
-  ev67 := ev67-
-endif
+ev67-$(CONFIG_ALPHA_EV67) := ev67-

 obj-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
 	udelay.o \
-	$(ev6)memset.o \
-	$(ev6)memcpy.o \
+	$(ev6-y)memset.o \
+	$(ev6-y)memcpy.o \
 	memmove.o \
 	io.o \
 	checksum.o \
 	csum_partial_copy.o \
-	$(ev67)strlen.o \
-	$(ev67)strcat.o \
+	$(ev67-y)strlen.o \
+	$(ev67-y)strcat.o \
 	strcpy.o \
-	$(ev67)strncat.o \
+	$(ev67-y)strncat.o \
 	strncpy.o \
-	$(ev6)stxcpy.o \
-	$(ev6)stxncpy.o \
-	$(ev67)strchr.o \
-	$(ev67)strrchr.o \
-	$(ev6)memchr.o \
-	$(ev6)copy_user.o \
-	$(ev6)clear_user.o \
-	$(ev6)strncpy_from_user.o \
-	$(ev67)strlen_user.o \
-	$(ev6)csum_ipv6_magic.o \
-	$(ev6)clear_page.o \
-	$(ev6)copy_page.o \
+	$(ev6-y)stxcpy.o \
+	$(ev6-y)stxncpy.o \
+	$(ev67-y)strchr.o \
+	$(ev67-y)strrchr.o \
+	$(ev6-y)memchr.o \
+	$(ev6-y)copy_user.o \
+	$(ev6-y)clear_user.o \
+	$(ev6-y)strncpy_from_user.o \
+	$(ev67-y)strlen_user.o \
+	$(ev6-y)csum_ipv6_magic.o \
+	$(ev6-y)clear_page.o \
+	$(ev6-y)copy_page.o \
 	strcasecmp.o \
 	fpreg.o \
 	callback_srm.o srm_puts.o srm_printk.o

 obj-$(CONFIG_SMP) += dec_and_lock.o

-$(obj)/__divqu.o: $(obj)/$(ev6)divide.S
-	$(CC) $(AFLAGS) -DDIV -c -o $(obj)/__divqu.o $(obj)/$(ev6)divide.S
-
-$(obj)/__remqu.o: $(obj)/$(ev6)divide.S
-	$(CC) $(AFLAGS) -DREM -c -o $(obj)/__remqu.o $(obj)/$(ev6)divide.S
-
-$(obj)/__divlu.o: $(obj)/$(ev6)divide.S
-	$(CC) $(AFLAGS) -DDIV -DINTSIZE \
-		-c -o $(obj)/__divlu.o $(obj)/$(ev6)divide.S
-
-$(obj)/__remlu.o: $(obj)/$(ev6)divide.S
-	$(CC) $(AFLAGS) -DREM -DINTSIZE \
-		-c -o $(obj)/__remlu.o $(obj)/$(ev6)divide.S
+# The division routines are built from single source, with different defines.
+AFLAGS___divqu.o = -DDIV
+AFLAGS___remqu.o =       -DREM
+AFLAGS___divlu.o = -DDIV       -DINTSIZE
+AFLAGS___remlu.o =       -DREM -DINTSIZE
+
+$(obj)/__divqu.o: $(obj)/$(ev6-y)divide.S
+	$(cmd_as_o_S)
+$(obj)/__remqu.o: $(obj)/$(ev6-y)divide.S
+	$(cmd_as_o_S)
+$(obj)/__divlu.o: $(obj)/$(ev6-y)divide.S
+	$(cmd_as_o_S)
+$(obj)/__remlu.o: $(obj)/$(ev6-y)divide.S
+	$(cmd_as_o_S)
--- a/arch/alpha/math-emu/Makefile
+++ b/arch/alpha/math-emu/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the FPU instruction emulation.
 #

-CFLAGS += -I. -I$(TOPDIR)/include/math-emu -w
+CFLAGS += -Iinclude/math-emu -w

 obj-$(CONFIG_MATHEMU) += math.o qrnnd.o