Skip to content

L
linux
Commit 7184c42c authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski
Browse files
Options

ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260 

Replace hard-coded values of type of GIC interrupt and its flags with
respective macros from header to increase code readability.
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent 888950b0
Hide whitespace changes
Inline Side-by-side
Showing with 26 additions and 24 deletions
arch/arm/boot/dts/exynos5260.dtsi
View file @ 7184c42c
......@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
......@@ -169,7 +170,8 @@ gic: interrupt-controller@10481000 {
<0x10482000 0x1000>,
<0x10484000 0x2000>,
<0x10486000 0x2000>;
interrupts = <1 9 0xf04>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
chipid: chipid@10000000 {
......@@ -182,18 +184,18 @@ mct: mct@100B0000 {
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
<0 105 IRQ_TYPE_LEVEL_HIGH>,
<0 106 IRQ_TYPE_LEVEL_HIGH>,
<0 107 IRQ_TYPE_LEVEL_HIGH>,
<0 122 IRQ_TYPE_LEVEL_HIGH>,
<0 123 IRQ_TYPE_LEVEL_HIGH>,
<0 124 IRQ_TYPE_LEVEL_HIGH>,
<0 125 IRQ_TYPE_LEVEL_HIGH>,
<0 126 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>,
<0 128 IRQ_TYPE_LEVEL_HIGH>,
<0 129 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci@10F00000 {
......@@ -219,25 +221,25 @@ cci_control1: slave-if@5000 {
pinctrl_0: pinctrl@11600000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@12290000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@128B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10D50000 {
......@@ -248,7 +250,7 @@ pmu_system_controller: system-controller@10D50000 {
uart0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
......@@ -257,7 +259,7 @@ uart0: serial@12C00000 {
uart1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
......@@ -266,7 +268,7 @@ uart1: serial@12C10000 {
uart2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
......@@ -275,7 +277,7 @@ uart2: serial@12C20000 {
uart3: serial@12860000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
......@@ -284,7 +286,7 @@ uart3: serial@12860000 {
mmc_0: mmc@12140000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
......@@ -296,7 +298,7 @@ mmc_0: mmc@12140000 {
mmc_1: mmc@12150000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
......@@ -308,7 +310,7 @@ mmc_1: mmc@12150000 {
mmc_2: mmc@12160000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7