Merge tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The code changes address mostly minor problems:

   - Several NXP/FSL SoC driver fixes, addressing issues with error
     handling and compilation

   - Fix a clock disabling imbalance in gpcv2 driver.

   - Arm Juno DMA coherency issue

   - Trivial firmware driver fixes for op-tee and scmi firmware

  The remaining changes address issues in the devicetree files:

   - A timer regression for the OMAP devkit8000, which has to use the
     alternative timer.

   - A hang in the i.MX8MM power domain configuration

   - Multiple fixes for the Rockchip RK3399 addressing issues with sound
     and eMMC

   - Cosmetic fixes for i.MX8ULP, RK3xxx, and Tegra124"

* tag 'soc-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
  ARM: tegra: Move panels to AUX bus
  soc: imx: gpcv2: Fix clock disabling imbalance in error path
  soc: fsl: qe: Check of ioremap return value
  soc: fsl: qe: fix typo in a comment
  soc: fsl: guts: Add a missing memory allocation failure check
  soc: fsl: guts: Revert commit 3c0d64e8
  soc: fsl: Correct MAINTAINERS database (SOC)
  soc: fsl: Correct MAINTAINERS database (QUICC ENGINE LIBRARY)
  soc: fsl: Replace kernel.h with the necessary inclusions
  dt-bindings: fsl,layerscape-dcfg: add missing compatible for lx2160a
  dt-bindings: qoriq-clock: add missing compatible for lx2160a
  ARM: dts: Use 32KiHz oscillator on devkit8000
  ARM: dts: switch timer config to common devkit8000 devicetree
  tee: optee: fix error return code in probe function
  arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as required
  arm64: dts: imx8mm: Fix VPU Hanging
  ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
  ARM: dts: rockchip: reorder rk322x hmdi clocks
  firmware: arm_scmi: Remove space in MODULE_ALIAS name
  arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"
  ...

CREDITS

@@ -895,6 +895,12 @@ S: 3000 FORE Drive
 S: Warrendale, Pennsylvania 15086
 S: USA
 
+N: Ludovic Desroches
+E: ludovic.desroches@microchip.com
+D: Maintainer for ARM/Microchip (AT91) SoC support
+D: Author of ADC, pinctrl, XDMA and SDHCI drivers for this platform
+S: France
+
 N: Martin Devera
 E: devik@cdi.cz
 W: http://luxik.cdi.cz/~devik/qos/

Documentation/devicetree/bindings/arm/atmel-at91.yaml

@@ -8,7 +8,8 @@ title: Atmel AT91 device tree bindings.
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Ludovic Desroches <ludovic.desroches@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
 
 description: |
   Boards with a SoC of the Atmel AT91 or SMART family shall have the following

Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt

@@ -8,7 +8,7 @@ Required properties:
   - compatible: Should contain a chip-specific compatible string,
 	Chip-specific strings are of the form "fsl,<chip>-dcfg",
 	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a, lx2160a
 
   - reg : should contain base address and length of DCFG memory-mapped registers
 

Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -44,6 +44,7 @@ Required properties:
 	* "fsl,ls1046a-clockgen"
 	* "fsl,ls1088a-clockgen"
 	* "fsl,ls2080a-clockgen"
+	* "fsl,lx2160a-clockgen"
 	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -53,6 +53,7 @@ properties:
           - const: st,stm32mp15-hsotg
           - const: snps,dwc2
       - const: samsung,s3c6400-hsotg
+      - const: intel,socfpga-agilex-hsotg
 
   reg:
     maxItems: 1

MAINTAINERS

@@ -2254,7 +2254,7 @@ F:	drivers/phy/mediatek/
 ARM/Microchip (AT91) SoC support
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-M:	Ludovic Desroches <ludovic.desroches@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 W:	http://www.linux4sam.org
@@ -7744,8 +7744,7 @@ M:	Qiang Zhao <qiang.zhao@nxp.com>
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/soc/fsl/qe/
-F:	include/soc/fsl/*qe*.h
-F:	include/soc/fsl/*ucc*.h
+F:	include/soc/fsl/qe/
 
 FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
 M:	Li Yang <leoyang.li@nxp.com>
@@ -7776,6 +7775,7 @@ F:	Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
 F:	Documentation/devicetree/bindings/soc/fsl/
 F:	drivers/soc/fsl/
 F:	include/linux/fsl/
+F:	include/soc/fsl/
 
 FREESCALE SOC FS_ENET DRIVER
 M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>

arch/arm/boot/dts/omap3-devkit8000-common.dtsi

@@ -158,6 +158,24 @@ &mmc3 {
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*

arch/arm/boot/dts/omap3-devkit8000.dts

@@ -14,36 +14,3 @@ aliases {
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};

arch/arm/boot/dts/rk322x.dtsi

@@ -718,8 +718,8 @@ hdmi: hdmi@200a0000 {
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;

arch/arm/boot/dts/rk3288.dtsi

@@ -971,7 +971,7 @@ i2s: i2s@ff890000 {
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/tegra124-nyan-big.dts

@@ -13,12 +13,15 @@ / {
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */

arch/arm/boot/dts/tegra124-nyan-blaze.dts

@@ -15,12 +15,15 @@ / {
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {

arch/arm/boot/dts/tegra124-venice2.dts

@@ -48,6 +48,13 @@ sor@54540000 {
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1080,13 +1087,6 @@ power {
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -543,8 +543,7 @@ pcie_ctlr: pcie@40000000 {
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		/* Standard AXI Translation entries as programmed by EDK2 */
-		dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
-			     <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+		dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
 			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -707,7 +707,6 @@ pgc_vpumix: power-domain@6 {
 						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
 						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
 						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
-						resets = <&src IMX8MQ_RESET_VPU_RESET>;
 					};
 
 					pgc_vpu_g1: power-domain@7 {

arch/arm64/boot/dts/freescale/imx8ulp.dtsi

@@ -132,7 +132,7 @@ scmi_devpd: protocol@11 {
 
 			scmi_sensor: protocol@15 {
 				reg = <0x15>;
-				#thermal-sensor-cells = <0>;
+				#thermal-sensor-cells = <1>;
 			};
 		};
 	};

arch/arm64/boot/dts/intel/socfpga_agilex.dtsi

@@ -502,7 +502,7 @@ uart1: serial@ffc02100 {
 		};
 
 		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb00000 0x40000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0>;
@@ -515,7 +515,7 @@ usb0: usb@ffb00000 {
 		};
 
 		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb40000 0x40000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0>;

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -711,7 +711,7 @@ rktimer: timer@ff210000 {
 		clock-names = "pclk", "timer";
 	};
 
-	dmac: dmac@ff240000 {
+	dmac: dma-controller@ff240000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xff240000 0x0 0x4000>;
 		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -489,7 +489,7 @@ pwm3: pwm@ff1b0030 {
 		status = "disabled";
 	};
 
-	dmac: dmac@ff1f0000 {
+	dmac: dma-controller@ff1f0000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xff1f0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

@@ -286,7 +286,7 @@ max98357a: max98357a {
 
 	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
-		rockchip,cpu = <&i2s0 &i2s2>;
+		rockchip,cpu = <&i2s0 &spdif>;
 	};
 };
 
@@ -437,10 +437,6 @@ &i2s0 {
 	status = "okay";
 };
 
-&i2s2 {
-	status = "okay";
-};
-
 &io_domains {
 	status = "okay";
 
@@ -537,6 +533,17 @@ &sdmmc {
 	vqmmc-supply = <&ppvar_sd_card_io>;
 };
 
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
 &spi1 {
 	status = "okay";
 

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

@@ -232,6 +232,7 @@ &usbdrd3_0 {
 
 &usbdrd_dwc3_0 {
 	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -25,6 +25,13 @@ module_led: led-0 {
 		};
 	};
 
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -422,9 +429,22 @@ vcc5v0_host_en: vcc5v0-host-en {
 			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1881,10 +1881,10 @@ hdmi: hdmi@ff940000 {
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;

arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts

@@ -285,8 +285,6 @@ regulator-state-mem {
 			vcc_ddr: DCDC_REG3 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
 				regulator-initial-mode = <0x2>;
 				regulator-name = "vcc_ddr";
 				regulator-state-mem {

arch/arm64/boot/dts/rockchip/rk3568.dtsi

@@ -32,13 +32,11 @@ gmac0: ethernet@fe2a0000 {
 		clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>,
 			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>,
 			 <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>,
-			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>,
-			 <&cru PCLK_XPCS>;
+			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>;
 		clock-names = "stmmaceth", "mac_clk_rx",
 			      "mac_clk_tx", "clk_mac_refout",
 			      "aclk_mac", "pclk_mac",
-			      "clk_mac_speed", "ptp_ref",
-			      "pclk_xpcs";
+			      "clk_mac_speed", "ptp_ref";
 		resets = <&cru SRST_A_GMAC0>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;

arch/arm64/boot/dts/rockchip/rk356x.dtsi

@@ -651,7 +651,7 @@ &i2s1m0_sdo0   &i2s1m0_sdo1
 		status = "disabled";
 	};
 
-	dmac0: dmac@fe530000 {
+	dmac0: dma-controller@fe530000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xfe530000 0x0 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
@@ -662,7 +662,7 @@ dmac0: dmac@fe530000 {
 		#dma-cells = <1>;
 	};
 
-	dmac1: dmac@fe550000 {
+	dmac1: dma-controller@fe550000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xfe550000 0x0 0x4000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,

drivers/clocksource/timer-ti-dm-systimer.c

@@ -241,8 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void)
 	bool quirk_unreliable_oscillator = false;
 
 	/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
-	if (of_machine_is_compatible("ti,omap3-beagle-ab4") ||
-	    of_machine_is_compatible("timll,omap3-devkit8000")) {
+	if (of_machine_is_compatible("ti,omap3-beagle-ab4")) {
 		quirk_unreliable_oscillator = true;
 		counter_32k = -ENODEV;
 	}

drivers/firmware/arm_scmi/driver.c

@@ -2112,7 +2112,7 @@ static void __exit scmi_driver_exit(void)
 }
 module_exit(scmi_driver_exit);
 
-MODULE_ALIAS("platform: arm-scmi");
+MODULE_ALIAS("platform:arm-scmi");
 MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
 MODULE_DESCRIPTION("ARM SCMI protocol driver");
 MODULE_LICENSE("GPL v2");

drivers/soc/fsl/guts.c

@@ -28,7 +28,6 @@ struct fsl_soc_die_attr {
 static struct guts *guts;
 static struct soc_device_attribute soc_dev_attr;
 static struct soc_device *soc_dev;
-static struct device_node *root;
 
 
 /* SoC die attribute definition for QorIQ platform */
@@ -138,7 +137,7 @@ static u32 fsl_guts_get_svr(void)
 
 static int fsl_guts_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *root, *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
 	const struct fsl_soc_die_attr *soc_die;
 	const char *machine;
@@ -159,8 +158,14 @@ static int fsl_guts_probe(struct platform_device *pdev)
 	root = of_find_node_by_path("/");
 	if (of_property_read_string(root, "model", &machine))
 		of_property_read_string_index(root, "compatible", 0, &machine);
-	if (machine)
-		soc_dev_attr.machine = machine;
+	if (machine) {
+		soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
+		if (!soc_dev_attr.machine) {
+			of_node_put(root);
+			return -ENOMEM;
+		}
+	}
+	of_node_put(root);
 
 	svr = fsl_guts_get_svr();
 	soc_die = fsl_soc_die_match(svr, fsl_soc_die);
@@ -195,7 +200,6 @@ static int fsl_guts_probe(struct platform_device *pdev)
 static int fsl_guts_remove(struct platform_device *dev)
 {
 	soc_device_unregister(soc_dev);
-	of_node_put(root);
 	return 0;
 }
 

drivers/soc/fsl/qe/qe.c

@@ -147,7 +147,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
  * memory mapped space.
  * The BRG clock is the QE clock divided by 2.
  * It was set up long ago during the initial boot phase and is
- * is given to us.
+ * given to us.
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers). Documentation uses 1-based numbering.
  */
@@ -421,7 +421,7 @@ static void qe_upload_microcode(const void *base,
 
 	for (i = 0; i < be32_to_cpu(ucode->count); i++)
 		iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
-	
+
 	/* Set I-RAM Ready Register */
 	iowrite32be(QE_IRAM_READY, &qe_immr->iram.iready);
 }

drivers/soc/fsl/qe/qe_io.c

@@ -35,6 +35,8 @@ int par_io_init(struct device_node *np)
 	if (ret)
 		return ret;
 	par_io = ioremap(res.start, resource_size(&res));
+	if (!par_io)
+		return -ENOMEM;
 
 	if (!of_property_read_u32(np, "num-ports", &num_ports))
 		num_par_io_ports = num_ports;

drivers/soc/imx/gpcv2.c

@@ -382,7 +382,8 @@ static int imx_pgc_power_down(struct generic_pm_domain *genpd)
 	return 0;
 
 out_clk_disable:
-	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+	if (!domain->keep_clocks)
+		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
 
 	return ret;
 }

drivers/tee/optee/ffa_abi.c

@@ -869,8 +869,10 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
 	optee_supp_init(&optee->supp);
 	ffa_dev_set_drvdata(ffa_dev, optee);
 	ctx = teedev_open(optee->teedev);
-	if (IS_ERR(ctx))
+	if (IS_ERR(ctx)) {
+		rc = PTR_ERR(ctx);
 		goto err_rhashtable_free;
+	}
 	optee->ctx = ctx;
 	rc = optee_notif_init(optee, OPTEE_DEFAULT_MAX_NOTIF_VALUE);
 	if (rc)

drivers/tee/optee/smc_abi.c

@@ -1417,8 +1417,10 @@ static int optee_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, optee);
 	ctx = teedev_open(optee->teedev);
-	if (IS_ERR(ctx))
+	if (IS_ERR(ctx)) {
+		rc = PTR_ERR(ctx);
 		goto err_supp_uninit;
+	}
 	optee->ctx = ctx;
 	rc = optee_notif_init(optee, max_notif_value);
 	if (rc)

include/soc/fsl/dpaa2-fd.h

@@ -7,7 +7,8 @@
 #ifndef __FSL_DPAA2_FD_H
 #define __FSL_DPAA2_FD_H
 
-#include <linux/kernel.h>
+#include <linux/byteorder/generic.h>
+#include <linux/types.h>
 
 /**
  * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2

include/soc/fsl/qe/immap_qe.h

@@ -13,7 +13,8 @@
 #define _ASM_POWERPC_IMMAP_QE_H
 #ifdef __KERNEL__
 
-#include <linux/kernel.h>
+#include <linux/types.h>
+
 #include <asm/io.h>
 
 #define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */

include/soc/fsl/qe/qe_tdm.h

@@ -10,8 +10,8 @@
 #ifndef _QE_TDM_H_
 #define _QE_TDM_H_
 
-#include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/types.h>
 
 #include <soc/fsl/qe/immap_qe.h>
 #include <soc/fsl/qe/qe.h>
@@ -19,6 +19,8 @@
 #include <soc/fsl/qe/ucc.h>
 #include <soc/fsl/qe/ucc_fast.h>
 
+struct device_node;
+
 /* SI RAM entries */
 #define SIR_LAST	0x0001
 #define SIR_BYTE	0x0002

include/soc/fsl/qe/ucc_fast.h

@@ -10,7 +10,7 @@
 #ifndef __UCC_FAST_H__
 #define __UCC_FAST_H__
 
-#include <linux/kernel.h>
+#include <linux/types.h>
 
 #include <soc/fsl/qe/immap_qe.h>
 #include <soc/fsl/qe/qe.h>

include/soc/fsl/qe/ucc_slow.h

@@ -11,7 +11,7 @@
 #ifndef __UCC_SLOW_H__
 #define __UCC_SLOW_H__
 
-#include <linux/kernel.h>
+#include <linux/types.h>
 
 #include <soc/fsl/qe/immap_qe.h>
 #include <soc/fsl/qe/qe.h>