Commit 71d2c120 authored by Peter Meerwald's avatar Peter Meerwald Committed by Jonathan Cameron

iio: max1363 comment and whitespace fixes

Signed-off-by: default avatarPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 4389fbec
......@@ -56,7 +56,7 @@
#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
/* think about includeing max11600 etc - more settings */
/* think about including max11600 etc - more settings */
#define MAX1363_SETUP_EXT_CLOCK 0x08
#define MAX1363_SETUP_INT_CLOCK 0x00
#define MAX1363_SETUP_UNIPOLAR 0x00
......@@ -87,7 +87,7 @@
/* max123{6-9} only */
#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
/* max1363 only - merely part of channel selects or don't care for others*/
/* max1363 only - merely part of channel selects or don't care for others */
#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
......@@ -134,7 +134,7 @@ enum max1363_modes {
* @mode_list: array of available scan modes
* @default_mode: the scan mode in which the chip starts up
* @int_vref_mv: the internal reference voltage
* @num_channels: number of channels
* @num_modes: number of modes
* @bits: accuracy of the adc in bits
*/
struct max1363_chip_info {
......@@ -153,7 +153,7 @@ struct max1363_chip_info {
* @client: i2c_client
* @setupbyte: cache of current device setup byte
* @configbyte: cache of current device config byte
* @chip_info: chip model specific constants, available modes etc
* @chip_info: chip model specific constants, available modes, etc.
* @current_mode: the scan mode of this chip
* @requestedmask: a valid requested set of channels
* @reg: supply regulator
......@@ -294,7 +294,7 @@ static const struct max1363_mode max1363_mode_table[] = {
static const struct max1363_mode
*max1363_match_mode(const unsigned long *mask,
const struct max1363_chip_info *ci)
const struct max1363_chip_info *ci)
{
int i;
if (mask)
......@@ -1395,7 +1395,7 @@ static int max1363_initial_setup(struct max1363_state *st)
| MAX1363_SETUP_UNIPOLAR
| MAX1363_SETUP_NORESET;
/* Set scan mode writes the config anyway so wait until then*/
/* Set scan mode writes the config anyway so wait until then */
st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
......@@ -1424,7 +1424,6 @@ static int __devinit max1363_alloc_scan_masks(struct iio_dev *indio_dev)
return 0;
}
static irqreturn_t max1363_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
......@@ -1523,7 +1522,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
if (ret)
goto error_disable_reg;
/* Estabilish that the iio_dev is a child of the i2c device */
/* Establish that the iio_dev is a child of the i2c device */
indio_dev->dev.parent = &client->dev;
indio_dev->name = id->name;
indio_dev->channels = st->chip_info->channels;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment