Merge branch 'qca8081-phy-driver'

Luo Jie says:

====================
net: phy: Add qca8081 ethernet phy driver

This patch series add the qca8081 ethernet phy driver support, which
improve the wol feature, leverage at803x phy driver and add the fast
retrain, master/slave seed and CDT feature.

Changes in v7:
	* update Reviewed-by tags.

Changes in v6:
	* add Reviewed-by tags on the applicable patches.

Changes in v5:
	* rebase the patches on net-next/master.

Changes in v4:
	* handle other interrupts in set_wol.
	* add genphy_c45_fast_retrain.

Changes in v3:
	* correct a typo "excpet".
	* remove the suffix "PHY" from phy name.

Changes in v2:
	* add definitions of fast retrain related registers in mdio.h.
	* break up the patch into small patches.
	* improve the at803x legacy code.

Changes in v1:
	* merge qca8081 phy driver into at803x.
	* add cdt feature.
	* leverage at803x phy driver helpers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/phy-c45.c

@@ -611,6 +611,40 @@ int genphy_c45_loopback(struct phy_device *phydev, bool enable)
 }
 EXPORT_SYMBOL_GPL(genphy_c45_loopback);
 
+/**
+ * genphy_c45_fast_retrain - configure fast retrain registers
+ * @phydev: target phy_device struct
+ *
+ * Description: If fast-retrain is enabled, we configure PHY as
+ *   advertising fast retrain capable and THP Bypass Request, then
+ *   enable fast retrain. If it is not enabled, we configure fast
+ *   retrain disabled.
+ */
+int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable)
+{
+	int ret;
+
+	if (!enable)
+		return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR,
+				MDIO_PMA_10GBR_FSRT_ENABLE);
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported)) {
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
+				MDIO_AN_10GBT_CTRL_ADVFSRT2_5G);
+		if (ret)
+			return ret;
+
+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_AN_CTRL2,
+				MDIO_AN_THP_BP2_5GT);
+		if (ret)
+			return ret;
+	}
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FSRT_CSR,
+			MDIO_PMA_10GBR_FSRT_ENABLE);
+}
+EXPORT_SYMBOL_GPL(genphy_c45_fast_retrain);
+
 struct phy_driver genphy_c45_driver = {
 	.phy_id         = 0xffffffff,
 	.phy_id_mask    = 0xffffffff,

include/linux/phy.h

@@ -1584,6 +1584,7 @@ int genphy_c45_config_aneg(struct phy_device *phydev);
 int genphy_c45_loopback(struct phy_device *phydev, bool enable);
 int genphy_c45_pma_resume(struct phy_device *phydev);
 int genphy_c45_pma_suspend(struct phy_device *phydev);
+int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable);
 
 /* Generic C45 PHY driver */
 extern struct phy_driver genphy_c45_driver;

include/uapi/linux/mdio.h

@@ -53,12 +53,14 @@
 #define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
 #define MDIO_AN_EEE_ADV2	62	/* EEE advertisement 2 */
 #define MDIO_AN_EEE_LPABLE2	63	/* EEE link partner ability 2 */
+#define MDIO_AN_CTRL2		64	/* AN THP bypass request control */
 
 /* Media-dependent registers. */
 #define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
 #define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
 #define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
 					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FSRT_CSR	147	/* 10GBASE-R fast retrain status and control */
 #define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
 #define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
 #define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
@@ -239,6 +241,9 @@
 #define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
 #define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
 
+/* PMA 10GBASE-R Fast Retrain status and control register. */
+#define MDIO_PMA_10GBR_FSRT_ENABLE	0x0001	/* Fast retrain enable */
+
 /* PCS 10GBASE-R/-T status register 1. */
 #define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
 
@@ -247,6 +252,7 @@
 #define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
 
 /* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADVFSRT2_5G	0x0020	/* Advertise 2.5GBASE-T fast retrain */
 #define MDIO_AN_10GBT_CTRL_ADV2_5G	0x0080	/* Advertise 2.5GBASE-T */
 #define MDIO_AN_10GBT_CTRL_ADV5G	0x0100	/* Advertise 5GBASE-T */
 #define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
@@ -289,6 +295,9 @@
 #define MDIO_EEE_2_5GT		0x0001	/* 2.5GT EEE cap */
 #define MDIO_EEE_5GT		0x0002	/* 5GT EEE cap */
 
+/* AN MultiGBASE-T AN control 2 */
+#define MDIO_AN_THP_BP2_5GT	0x0008	/* 2.5GT THP bypass request */
+
 /* 2.5G/5G Extended abilities register. */
 #define MDIO_PMA_NG_EXTABLE_2_5GBT	0x0001	/* 2.5GBASET ability */
 #define MDIO_PMA_NG_EXTABLE_5GBT	0x0002	/* 5GBASET ability */