Skip to content

L
linux
Commit 72037372 authored by Alan Cox's avatar Alan Cox Committed by Linus Torvalds
Browse files
Options

[PATCH] fix path names and printks in IDE pci

parent 5cea26a2
Hide whitespace changes
Inline Side-by-side
Showing with 58 additions and 45 deletions
drivers/ide/pci/adma100.c
View file @ 72037372
/*
* linux/drivers/ide/adma100.c -- basic support for Pacific Digital ADMA-100 boards
* linux/drivers/ide/pci/adma100.c -- basic support for Pacific Digital ADMA-100 boards
*
* Created 09 Apr 2002 by Mark Lord
*
......
drivers/ide/pci/aec62xx.c
View file @ 72037372
/*
* linux/drivers/ide/aec62xx.c Version 0.11 March 27, 2002
* linux/drivers/ide/pci/aec62xx.c Version 0.11 March 27, 2002
*
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
*
......@@ -409,7 +409,7 @@ static unsigned int __init init_chipset_aec62xx (struct pci_dev *dev, const char
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
printk("%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
}
#if defined(DISPLAY_AEC62XX_TIMINGS) && defined(CONFIG_PROC_FS)
......
drivers/ide/pci/cmd640.c
View file @ 72037372
/*
* linux/drivers/ide/cmd640.c Version 1.02 Sep 01, 1996
* linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996
*
* Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
*/
......
drivers/ide/pci/cmd64x.c
View file @ 72037372
/* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16
*
* linux/drivers/ide/cmd64x.c Version 1.30 Sept 10, 2002
* linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002
*
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
* Note, this driver is not used at all on other systems because
......@@ -596,7 +596,7 @@ static unsigned int __init init_chipset_cmd64x (struct pci_dev *dev, const char
#ifdef __i386__
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_byte(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
printk("%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
}
#endif
......@@ -604,7 +604,7 @@ static unsigned int __init init_chipset_cmd64x (struct pci_dev *dev, const char
case PCI_DEVICE_ID_CMD_643:
break;
case PCI_DEVICE_ID_CMD_646:
printk("%s: chipset revision 0x%02X, ", name, class_rev);
printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev);
switch(class_rev) {
case 0x07:
case 0x05:
......
drivers/ide/pci/cs5530.c
View file @ 72037372
/*
* linux/drivers/ide/cs5530.c Version 0.7 Sept 10, 2002
* linux/drivers/ide/pci/cs5530.c Version 0.7 Sept 10, 2002
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
* Ditto of GNU General Public License.
......@@ -9,6 +9,9 @@
*
* Development of this chipset driver was funded
* by the nice folks at National Semiconductor.
*
* Documentation:
* CS5530 documentation available from National Semiconductor.
*/
#include <linux/config.h>
......
drivers/ide/pci/hpt34x.c
View file @ 72037372
/*
* linux/drivers/ide/hpt34x.c Version 0.40 Sept 10, 2002
* linux/drivers/ide/pci/hpt34x.c Version 0.40 Sept 10, 2002
*
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* May be copied or modified under the terms of the GNU General Public License
......
drivers/ide/pci/ns87415.c
View file @ 72037372
/*
* linux/drivers/ide/ns87415.c Version 2.00 Sep. 10, 2002
* linux/drivers/ide/pci/ns87415.c Version 2.00 Sep. 10, 2002
*
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
......
drivers/ide/pci/opti621.c
View file @ 72037372
/*
* linux/drivers/ide/opti621.c Version 0.7 Sept 10, 2002
* linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002
*
* Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
*/
......
drivers/ide/pci/pdc202xx_new.c
View file @ 72037372
......@@ -224,7 +224,7 @@ static int pdcnew_tune_chipset (ide_drive_t *drive, u8 xferspeed)
decode_registers(REG_D, DP);
#endif /* PDC202XX_DECODE_REGISTER_INFO */
#if PDC202XX_DEBUG_DRIVE_INFO
printk("%s: %s drive%d 0x%08x ",
printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
drive->name, ide_xfer_verbose(speed),
drive->dn, drive_conf);
pci_read_config_dword(dev, drive_pci, &drive_conf);
......@@ -321,7 +321,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
case PCI_DEVICE_ID_PROMISE_20268:
cable = pdcnew_new_cable_detect(hwif);
#if PDC202_DEBUG_CABLE
printk("%s: %s-pin cable, %s-pin cable, %d\n",
printk(KERN_DEBUG "%s: %s-pin cable, %s-pin cable, %d\n",
hwif->name, hwif->udma_four ? "80" : "40",
cable ? "40" : "80", cable);
#endif /* PDC202_DEBUG_CABLE */
......@@ -347,15 +347,15 @@ static int config_chipset_for_dma (ide_drive_t *drive)
if ((ultra_66) && (cable)) {
#ifdef DEBUG
printk("ULTRA 66/100/133: %s channel of Ultra 66/100/133 "
printk(KERN_DEBUG "ULTRA 66/100/133: %s channel of Ultra 66/100/133 "
"requires an 80-pin cable for Ultra66 operation.\n",
hwif->channel ? "Secondary" : "Primary");
printk(" Switching to Ultra33 mode.\n");
printk(KERN_DEBUG " Switching to Ultra33 mode.\n");
#endif /* DEBUG */
/* Primary : zero out second bit */
/* Secondary : zero out fourth bit */
printk("Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
printk("%s reduced to Ultra33 mode.\n", drive->name);
printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
}
if (drive->media != ide_disk)
......@@ -444,7 +444,7 @@ static void pdcnew_new_reset (ide_drive_t *drive)
/*
* Deleted this because it is redundant from the caller.
*/
printk("PDC202XX: %s channel reset.\n",
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
HWIF(drive)->channel ? "Secondary" : "Primary");
}
......@@ -459,7 +459,7 @@ static void pdcnew_reset_host (ide_hwif_t *hwif)
hwif->OUTB((udma_speed_flag & ~0x10), (high_16|0x001f));
mdelay(2000); /* 2 seconds ?! */
printk("PDC202XX: %s channel reset.\n",
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
hwif->channel ? "Secondary" : "Primary");
}
......@@ -513,7 +513,7 @@ static unsigned int __init init_chipset_pdcnew (struct pci_dev *dev, const char
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_dword(dev, PCI_ROM_ADDRESS,
dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
printk("%s: ROM enabled at 0x%08lx\n",
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n",
name, dev->resource[PCI_ROM_RESOURCE].start);
}
......@@ -555,7 +555,7 @@ static void __init init_hwif_pdc202new (ide_hwif_t *hwif)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
#if PDC202_DEBUG_CABLE
printk("%s: %s-pin cable\n",
printk(KERN_DEBUG "%s: %s-pin cable\n",
hwif->name, hwif->udma_four ? "80" : "40");
#endif /* PDC202_DEBUG_CABLE */
}
......
drivers/ide/pci/pdc202xx_old.c
View file @ 72037372
/*
* linux/drivers/ide/pdc202xx.c Version 0.36 Sept 11, 2002
* linux/drivers/ide/pci/pdc202xx_old.c Version 0.36 Sept 11, 2002
*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
*
......@@ -323,7 +323,7 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
decode_registers(REG_D, DP);
#endif /* PDC202XX_DECODE_REGISTER_INFO */
#if PDC202XX_DEBUG_DRIVE_INFO
printk("%s: %s drive%d 0x%08x ",
printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
drive->name, ide_xfer_verbose(speed),
drive->dn, drive_conf);
pci_read_config_dword(dev, drive_pci, &drive_conf);
......@@ -379,7 +379,7 @@ static int config_chipset_for_dma (ide_drive_t *drive)
case PCI_DEVICE_ID_PROMISE_20262:
cable = pdc202xx_old_cable_detect(hwif);
#if PDC202_DEBUG_CABLE
printk("%s: %s-pin cable, %s-pin cable, %d\n",
printk(KERN_DEBUG "%s: %s-pin cable, %s-pin cable, %d\n",
hwif->name, hwif->udma_four ? "80" : "40",
cable ? "40" : "80", cable);
#endif /* PDC202_DEBUG_CABLE */
......@@ -408,16 +408,16 @@ static int config_chipset_for_dma (ide_drive_t *drive)
if ((ultra_66) && (cable)) {
#ifdef DEBUG
printk("ULTRA 66/100/133: %s channel of Ultra 66/100/133 "
printk(KERN_DEBUG "ULTRA 66/100/133: %s channel of Ultra 66/100/133 "
"requires an 80-pin cable for Ultra66 operation.\n",
hwif->channel ? "Secondary" : "Primary");
printk(" Switching to Ultra33 mode.\n");
printk(KERN_DEBUG " Switching to Ultra33 mode.\n");
#endif /* DEBUG */
/* Primary : zero out second bit */
/* Secondary : zero out fourth bit */
hwif->OUTB(CLKSPD & ~mask, (hwif->dma_master + 0x11));
printk("Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
printk("%s reduced to Ultra33 mode.\n", drive->name);
printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
} else {
if (ultra_66) {
/*
......@@ -620,7 +620,7 @@ static void pdc202xx_reset_host (ide_hwif_t *hwif)
hwif->OUTB((udma_speed_flag & ~0x10), (high_16|0x001f));
mdelay(2000); /* 2 seconds ?! */
printk("PDC202XX: %s channel reset.\n",
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
hwif->channel ? "Secondary" : "Primary");
}
......@@ -699,7 +699,7 @@ static unsigned int __init init_chipset_pdc202xx (struct pci_dev *dev, const cha
if (dev->resource[PCI_ROM_RESOURCE].start) {
pci_write_config_dword(dev, PCI_ROM_ADDRESS,
dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
printk("%s: ROM enabled at 0x%08lx\n",
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n",
name, dev->resource[PCI_ROM_RESOURCE].start);
}
......@@ -780,7 +780,7 @@ static void __init init_hwif_pdc202xx (ide_hwif_t *hwif)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
#if PDC202_DEBUG_CABLE
printk("%s: %s-pin cable\n",
printk(KERN_DEBUG "%s: %s-pin cable\n",
hwif->name, hwif->udma_four ? "80" : "40");
#endif /* PDC202_DEBUG_CABLE */
}
......@@ -797,7 +797,7 @@ static void __init init_dma_pdc202xx (ide_hwif_t *hwif, unsigned long dmabase)
udma_speed_flag = hwif->INB((dmabase|0x1f));
primary_mode = hwif->INB((dmabase|0x1a));
secondary_mode = hwif->INB((dmabase|0x1b));
printk("%s: (U)DMA Burst Bit %sABLED " \
printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
"Primary %s Mode " \
"Secondary %s Mode.\n", hwif->cds->name,
(udma_speed_flag & 1) ? "EN" : "DIS",
......@@ -806,7 +806,7 @@ static void __init init_dma_pdc202xx (ide_hwif_t *hwif, unsigned long dmabase)
#ifdef CONFIG_PDC202XX_BURST
if (!(udma_speed_flag & 1)) {
printk("%s: FORCING BURST BIT 0x%02x->0x%02x ",
printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
hwif->cds->name, udma_speed_flag,
(udma_speed_flag|1));
hwif->OUTB(udma_speed_flag|1,(dmabase|0x1f));
......@@ -816,7 +816,7 @@ static void __init init_dma_pdc202xx (ide_hwif_t *hwif, unsigned long dmabase)
#endif /* CONFIG_PDC202XX_BURST */
#ifdef CONFIG_PDC202XX_MASTER
if (!(primary_mode & 1)) {
printk("%s: FORCING PRIMARY MODE BIT "
printk(KERN_INFO "%s: FORCING PRIMARY MODE BIT "
"0x%02x -> 0x%02x ", hwif->cds->name,
primary_mode, (primary_mode|1));
hwif->OUTB(primary_mode|1, (dmabase|0x1a));
......@@ -825,7 +825,7 @@ static void __init init_dma_pdc202xx (ide_hwif_t *hwif, unsigned long dmabase)
}
if (!(secondary_mode & 1)) {
printk("%s: FORCING SECONDARY MODE BIT "
printk(KERN_INFO "%s: FORCING SECONDARY MODE BIT "
"0x%02x -> 0x%02x ", hwif->cds->name,
secondary_mode, (secondary_mode|1));
hwif->OUTB(secondary_mode|1, (dmabase|0x1b));
......@@ -850,7 +850,7 @@ static void __init init_setup_pdc202ata4 (struct pci_dev *dev, ide_pci_device_t
if (irq != irq2) {
pci_write_config_byte(dev,
(PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
printk("%s: pci-config space interrupt "
printk(KERN_INFO "%s: pci-config space interrupt "
"mirror fixed.\n", d->name);
}
}
......
drivers/ide/pci/pdcadma.c
View file @ 72037372
/*
* linux/drivers/ide/pdcadma.c Version 0.05 Sept 10, 2002
* linux/drivers/ide/pci/pdcadma.c Version 0.05 Sept 10, 2002
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* May be copied or modified under the terms of the GNU General Public License
......
drivers/ide/pci/piix.c
View file @ 72037372
/*
* linux/drivers/ide/piix.c Version 0.42 January 11, 2003
* linux/drivers/ide/pci/piix.c Version 0.42 January 11, 2003
*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
......
drivers/ide/pci/rz1000.c
View file @ 72037372
/*
* linux/drivers/ide/rz1000.c Version 0.05 December 8, 1997
* linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
*
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
*/
......@@ -43,13 +43,13 @@ static void __init init_hwif_rz1000 (ide_hwif_t *hwif)
hwif->chipset = ide_rz1000;
if (!pci_read_config_word (dev, 0x40, &reg) &&
!pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
printk("%s: disabled chipset read-ahead "
printk(KERN_INFO "%s: disabled chipset read-ahead "
"(buggy RZ1000/RZ1001)\n", hwif->name);
} else {
hwif->serialized = 1;
hwif->drives[0].no_unmask = 1;
hwif->drives[1].no_unmask = 1;
printk("%s: serialized, disabled unmasking "
printk(KERN_INFO "%s: serialized, disabled unmasking "
"(buggy RZ1000/RZ1001)\n", hwif->name);
}
}
......
drivers/ide/pci/sc1200.c
View file @ 72037372
/*
* linux/drivers/ide/sc1200.c Version 0.9 24-Oct-2002
* linux/drivers/ide/pci/sc1200.c Version 0.91 28-Jan-2003
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
* May be copied or modified under the terms of the GNU General Public License
*
* Development of this chipset driver was funded
* by the nice folks at National Semiconductor.
*
* Documentation:
* Available from National Semiconductor
*/
#include <linux/config.h>
......
drivers/ide/pci/serverworks.c
View file @ 72037372
/*
* linux/drivers/ide/serverworks.c Version 0.7 10 Sept 2002
* linux/drivers/ide/pci/serverworks.c Version 0.7 10 Sept 2002
*
* Copyright (C) 1998-2000 Michel Aubry
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz
......@@ -21,6 +21,9 @@
*
* CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
*
* Documentation:
* Available under NDA only. Errata info very hard to get.
*
*/
#include <linux/config.h>
......
drivers/ide/pci/slc90e66.c
View file @ 72037372
/*
* linux/drivers/ide/slc90e66.c Version 0.11 September 11, 2002
* linux/drivers/ide/pci/slc90e66.c Version 0.11 September 11, 2002
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
*
......
drivers/ide/pci/trm290.c
View file @ 72037372
/*
* linux/drivers/ide/trm290.c Version 1.02 Mar. 18, 2000
* linux/drivers/ide/pci/trm290.c Version 1.02 Mar. 18, 2000
*
* Copyright (c) 1997-1998 Mark Lord
* May be copied or modified under the terms of the GNU General Public License
......@@ -176,6 +176,7 @@ static void trm290_selectproc (ide_drive_t *drive)
trm290_prepare_drive(drive, drive->using_dma);
}
#ifdef CONFIG_BLK_DEV_IDEDMA
static int trm290_ide_dma_write (ide_drive_t *drive /*, struct request *rq */)
{
ide_hwif_t *hwif = HWIF(drive);
......@@ -296,6 +297,7 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive)
status = hwif->INW(hwif->dma_status);
return (status == 0x00ff);
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
/*
* Invoked from ide-dma.c at boot time.
......@@ -342,11 +344,13 @@ void __init init_hwif_trm290 (ide_hwif_t *hwif)
ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3);
#ifdef CONFIG_BLK_DEV_IDEDMA
hwif->ide_dma_write = &trm290_ide_dma_write;
hwif->ide_dma_read = &trm290_ide_dma_read;
hwif->ide_dma_begin = &trm290_ide_dma_begin;
hwif->ide_dma_end = &trm290_ide_dma_end;
hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq;
#endif /* CONFIG_BLK_DEV_IDEDMA */
hwif->selectproc = &trm290_selectproc;
hwif->autodma = 0; /* play it safe for now */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7