drm/radeon: consolidate r600_audio.c into r600_hdmi.c

Most of that functionality is only used by r600_hdmi.c
and I'm planning to change that further.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/radeon/Makefile

@@ -72,7 +72,7 @@ radeon-y += radeon_device.o radeon_asic.o radeon_kms.o \
 	radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
 	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \
 	r200.o radeon_legacy_tv.o r600_cs.o r600_blit_shaders.o \
-	radeon_pm.o atombios_dp.o r600_audio.o r600_hdmi.o dce3_1_afmt.o \
+	radeon_pm.o atombios_dp.o r600_hdmi.o dce3_1_afmt.o \
 	evergreen.o evergreen_cs.o evergreen_blit_shaders.o \
 	evergreen_hdmi.o radeon_trace_points.o ni.o cayman_blit_shaders.o \
 	atombios_encoders.o radeon_semaphore.o radeon_sa.o atombios_i2c.o si.o \

drivers/gpu/drm/radeon/r600_audio.c

-/*
- * Copyright 2008 Advanced Micro Devices, Inc.
- * Copyright 2008 Red Hat Inc.
- * Copyright 2009 Christian König.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: Christian König
- */
-#include <drm/drmP.h>
-#include "radeon.h"
-#include "radeon_reg.h"
-#include "radeon_asic.h"
-#include "atom.h"
-
-/*
- * check if the chipset is supported
- */
-static int r600_audio_chipset_supported(struct radeon_device *rdev)
-{
-	return ASIC_IS_DCE2(rdev) && !ASIC_IS_NODCE(rdev);
-}
-
-struct r600_audio_pin r600_audio_status(struct radeon_device *rdev)
-{
-	struct r600_audio_pin status;
-	uint32_t value;
-
-	value = RREG32(R600_AUDIO_RATE_BPS_CHANNEL);
-
-	/* number of channels */
-	status.channels = (value & 0x7) + 1;
-
-	/* bits per sample */
-	switch ((value & 0xF0) >> 4) {
-	case 0x0:
-		status.bits_per_sample = 8;
-		break;
-	case 0x1:
-		status.bits_per_sample = 16;
-		break;
-	case 0x2:
-		status.bits_per_sample = 20;
-		break;
-	case 0x3:
-		status.bits_per_sample = 24;
-		break;
-	case 0x4:
-		status.bits_per_sample = 32;
-		break;
-	default:
-		dev_err(rdev->dev, "Unknown bits per sample 0x%x, using 16\n",
-			(int)value);
-		status.bits_per_sample = 16;
-	}
-
-	/* current sampling rate in HZ */
-	if (value & 0x4000)
-		status.rate = 44100;
-	else
-		status.rate = 48000;
-	status.rate *= ((value >> 11) & 0x7) + 1;
-	status.rate /= ((value >> 8) & 0x7) + 1;
-
-	value = RREG32(R600_AUDIO_STATUS_BITS);
-
-	/* iec 60958 status bits */
-	status.status_bits = value & 0xff;
-
-	/* iec 60958 category code */
-	status.category_code = (value >> 8) & 0xff;
-
-	return status;
-}
-
-/*
- * update all hdmi interfaces with current audio parameters
- */
-void r600_audio_update_hdmi(struct work_struct *work)
-{
-	struct radeon_device *rdev = container_of(work, struct radeon_device,
-						  audio_work);
-	struct drm_device *dev = rdev->ddev;
-	struct r600_audio_pin audio_status = r600_audio_status(rdev);
-	struct drm_encoder *encoder;
-	bool changed = false;
-
-	if (rdev->audio.pin[0].channels != audio_status.channels ||
-	    rdev->audio.pin[0].rate != audio_status.rate ||
-	    rdev->audio.pin[0].bits_per_sample != audio_status.bits_per_sample ||
-	    rdev->audio.pin[0].status_bits != audio_status.status_bits ||
-	    rdev->audio.pin[0].category_code != audio_status.category_code) {
-		rdev->audio.pin[0] = audio_status;
-		changed = true;
-	}
-
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		if (!radeon_encoder_is_digital(encoder))
-			continue;
-		if (changed || r600_hdmi_buffer_status_changed(encoder))
-			r600_hdmi_update_audio_settings(encoder);
-	}
-}
-
-/* enable the audio stream */
-void r600_audio_enable(struct radeon_device *rdev,
-		       struct r600_audio_pin *pin,
-		       bool enable)
-{
-	u32 value = 0;
-
-	if (!pin)
-		return;
-
-	if (ASIC_IS_DCE4(rdev)) {
-		if (enable) {
-			value |= 0x81000000; /* Required to enable audio */
-			value |= 0x0e1000f0; /* fglrx sets that too */
-		}
-		WREG32(EVERGREEN_AUDIO_ENABLE, value);
-	} else {
-		WREG32_P(R600_AUDIO_ENABLE,
-			 enable ? 0x81000000 : 0x0, ~0x81000000);
-	}
-}
-
-/*
- * initialize the audio vars
- */
-int r600_audio_init(struct radeon_device *rdev)
-{
-	if (!radeon_audio || !r600_audio_chipset_supported(rdev))
-		return 0;
-
-	rdev->audio.enabled = true;
-
-	rdev->audio.num_pins = 1;
-	rdev->audio.pin[0].channels = -1;
-	rdev->audio.pin[0].rate = -1;
-	rdev->audio.pin[0].bits_per_sample = -1;
-	rdev->audio.pin[0].status_bits = 0;
-	rdev->audio.pin[0].category_code = 0;
-	rdev->audio.pin[0].id = 0;
-	/* disable audio.  it will be set up later */
-	r600_audio_enable(rdev, &rdev->audio.pin[0], false);
-
-	return 0;
-}
-
-/*
- * release the audio timer
- * TODO: How to do this correctly on SMP systems?
- */
-void r600_audio_fini(struct radeon_device *rdev)
-{
-	if (!rdev->audio.enabled)
-		return;
-
-	r600_audio_enable(rdev, &rdev->audio.pin[0], false);
-
-	rdev->audio.enabled = false;
-}
-
-struct r600_audio_pin *r600_audio_get_pin(struct radeon_device *rdev)
-{
-	/* only one pin on 6xx-NI */
-	return &rdev->audio.pin[0];
-}

drivers/gpu/drm/radeon/r600_hdmi.c

@@ -71,6 +71,160 @@ static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = {
 };
 
 
+/*
+ * check if the chipset is supported
+ */
+static int r600_audio_chipset_supported(struct radeon_device *rdev)
+{
+	return ASIC_IS_DCE2(rdev) && !ASIC_IS_NODCE(rdev);
+}
+
+static struct r600_audio_pin r600_audio_status(struct radeon_device *rdev)
+{
+	struct r600_audio_pin status;
+	uint32_t value;
+
+	value = RREG32(R600_AUDIO_RATE_BPS_CHANNEL);
+
+	/* number of channels */
+	status.channels = (value & 0x7) + 1;
+
+	/* bits per sample */
+	switch ((value & 0xF0) >> 4) {
+	case 0x0:
+		status.bits_per_sample = 8;
+		break;
+	case 0x1:
+		status.bits_per_sample = 16;
+		break;
+	case 0x2:
+		status.bits_per_sample = 20;
+		break;
+	case 0x3:
+		status.bits_per_sample = 24;
+		break;
+	case 0x4:
+		status.bits_per_sample = 32;
+		break;
+	default:
+		dev_err(rdev->dev, "Unknown bits per sample 0x%x, using 16\n",
+			(int)value);
+		status.bits_per_sample = 16;
+	}
+
+	/* current sampling rate in HZ */
+	if (value & 0x4000)
+		status.rate = 44100;
+	else
+		status.rate = 48000;
+	status.rate *= ((value >> 11) & 0x7) + 1;
+	status.rate /= ((value >> 8) & 0x7) + 1;
+
+	value = RREG32(R600_AUDIO_STATUS_BITS);
+
+	/* iec 60958 status bits */
+	status.status_bits = value & 0xff;
+
+	/* iec 60958 category code */
+	status.category_code = (value >> 8) & 0xff;
+
+	return status;
+}
+
+/*
+ * update all hdmi interfaces with current audio parameters
+ */
+void r600_audio_update_hdmi(struct work_struct *work)
+{
+	struct radeon_device *rdev = container_of(work, struct radeon_device,
+						  audio_work);
+	struct drm_device *dev = rdev->ddev;
+	struct r600_audio_pin audio_status = r600_audio_status(rdev);
+	struct drm_encoder *encoder;
+	bool changed = false;
+
+	if (rdev->audio.pin[0].channels != audio_status.channels ||
+	    rdev->audio.pin[0].rate != audio_status.rate ||
+	    rdev->audio.pin[0].bits_per_sample != audio_status.bits_per_sample ||
+	    rdev->audio.pin[0].status_bits != audio_status.status_bits ||
+	    rdev->audio.pin[0].category_code != audio_status.category_code) {
+		rdev->audio.pin[0] = audio_status;
+		changed = true;
+	}
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		if (!radeon_encoder_is_digital(encoder))
+			continue;
+		if (changed || r600_hdmi_buffer_status_changed(encoder))
+			r600_hdmi_update_audio_settings(encoder);
+	}
+}
+
+/* enable the audio stream */
+void r600_audio_enable(struct radeon_device *rdev,
+		       struct r600_audio_pin *pin,
+		       bool enable)
+{
+	u32 value = 0;
+
+	if (!pin)
+		return;
+
+	if (ASIC_IS_DCE4(rdev)) {
+		if (enable) {
+			value |= 0x81000000; /* Required to enable audio */
+			value |= 0x0e1000f0; /* fglrx sets that too */
+		}
+		WREG32(EVERGREEN_AUDIO_ENABLE, value);
+	} else {
+		WREG32_P(R600_AUDIO_ENABLE,
+			 enable ? 0x81000000 : 0x0, ~0x81000000);
+	}
+}
+
+/*
+ * initialize the audio vars
+ */
+int r600_audio_init(struct radeon_device *rdev)
+{
+	if (!radeon_audio || !r600_audio_chipset_supported(rdev))
+		return 0;
+
+	rdev->audio.enabled = true;
+
+	rdev->audio.num_pins = 1;
+	rdev->audio.pin[0].channels = -1;
+	rdev->audio.pin[0].rate = -1;
+	rdev->audio.pin[0].bits_per_sample = -1;
+	rdev->audio.pin[0].status_bits = 0;
+	rdev->audio.pin[0].category_code = 0;
+	rdev->audio.pin[0].id = 0;
+	/* disable audio.  it will be set up later */
+	r600_audio_enable(rdev, &rdev->audio.pin[0], false);
+
+	return 0;
+}
+
+/*
+ * release the audio timer
+ * TODO: How to do this correctly on SMP systems?
+ */
+void r600_audio_fini(struct radeon_device *rdev)
+{
+	if (!rdev->audio.enabled)
+		return;
+
+	r600_audio_enable(rdev, &rdev->audio.pin[0], false);
+
+	rdev->audio.enabled = false;
+}
+
+struct r600_audio_pin *r600_audio_get_pin(struct radeon_device *rdev)
+{
+	/* only one pin on 6xx-NI */
+	return &rdev->audio.pin[0];
+}
+
 /*
  * calculate CTS and N values if they are not found in the table
  */

drivers/gpu/drm/radeon/radeon_asic.h

@@ -392,7 +392,6 @@ void r600_disable_interrupts(struct radeon_device *rdev);
 void r600_rlc_stop(struct radeon_device *rdev);
 /* r600 audio */
 int r600_audio_init(struct radeon_device *rdev);
-struct r600_audio_pin r600_audio_status(struct radeon_device *rdev);
 void r600_audio_fini(struct radeon_device *rdev);
 void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock);
 void r600_hdmi_update_avi_infoframe(struct drm_encoder *encoder, void *buffer,