pwm: dwc: split pci out of core driver

Moving towards adding non-pci support for the driver, move the pci
parts out of the core into their own module. This is partly due to
the module_driver() code only being allowed once in a module and also
to avoid a number of #ifdef if we build a single file in a system
without pci support.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230907161242.67190-2-ben.dooks@codethink.co.ukSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/Kconfig

@@ -186,9 +186,19 @@ config PWM_CROS_EC
 	  PWM driver for exposing a PWM attached to the ChromeOS Embedded
 	  Controller.
 
+config PWM_DWC_CORE
+	tristate
+	depends on HAS_IOMEM
+	help
+	  PWM driver for Synopsys DWC PWM Controller.
+
+	  To compile this driver as a module, build the dependecies as
+	  modules, this will be called pwm-dwc-core.
+
 config PWM_DWC
-	tristate "DesignWare PWM Controller"
-	depends on PCI
+	tristate "DesignWare PWM Controller (PCI bus)"
+	depends on HAS_IOMEM && PCI
+	select PWM_DWC_CORE
 	help
 	  PWM driver for Synopsys DWC PWM Controller attached to a PCI bus.
 

drivers/pwm/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_PWM_CLK)		+= pwm-clk.o
 obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
 obj-$(CONFIG_PWM_CRC)		+= pwm-crc.o
 obj-$(CONFIG_PWM_CROS_EC)	+= pwm-cros-ec.o
+obj-$(CONFIG_PWM_DWC_CORE)	+= pwm-dwc-core.o
 obj-$(CONFIG_PWM_DWC)		+= pwm-dwc.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
 obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o

drivers/pwm/pwm-dwc-core.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DesignWare PWM Controller driver core
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ *
+ * Author: Felipe Balbi (Intel)
+ * Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+ * Author: Raymond Tan <raymond.tan@intel.com>
+ */
+
+#define DEFAULT_SYMBOL_NAMESPACE dwc_pwm
+
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+
+#include "pwm-dwc.h"
+
+static void __dwc_pwm_set_enable(struct dwc_pwm *dwc, int pwm, int enabled)
+{
+	u32 reg;
+
+	reg = dwc_pwm_readl(dwc, DWC_TIM_CTRL(pwm));
+
+	if (enabled)
+		reg |= DWC_TIM_CTRL_EN;
+	else
+		reg &= ~DWC_TIM_CTRL_EN;
+
+	dwc_pwm_writel(dwc, reg, DWC_TIM_CTRL(pwm));
+}
+
+static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
+				     struct pwm_device *pwm,
+				     const struct pwm_state *state)
+{
+	u64 tmp;
+	u32 ctrl;
+	u32 high;
+	u32 low;
+
+	/*
+	 * Calculate width of low and high period in terms of input clock
+	 * periods and check are the result within HW limits between 1 and
+	 * 2^32 periods.
+	 */
+	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, DWC_CLK_PERIOD_NS);
+	if (tmp < 1 || tmp > (1ULL << 32))
+		return -ERANGE;
+	low = tmp - 1;
+
+	tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
+				    DWC_CLK_PERIOD_NS);
+	if (tmp < 1 || tmp > (1ULL << 32))
+		return -ERANGE;
+	high = tmp - 1;
+
+	/*
+	 * Specification says timer usage flow is to disable timer, then
+	 * program it followed by enable. It also says Load Count is loaded
+	 * into timer after it is enabled - either after a disable or
+	 * a reset. Based on measurements it happens also without disable
+	 * whenever Load Count is updated. But follow the specification.
+	 */
+	__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
+
+	/*
+	 * Write Load Count and Load Count 2 registers. Former defines the
+	 * width of low period and latter the width of high period in terms
+	 * multiple of input clock periods:
+	 * Width = ((Count + 1) * input clock period).
+	 */
+	dwc_pwm_writel(dwc, low, DWC_TIM_LD_CNT(pwm->hwpwm));
+	dwc_pwm_writel(dwc, high, DWC_TIM_LD_CNT2(pwm->hwpwm));
+
+	/*
+	 * Set user-defined mode, timer reloads from Load Count registers
+	 * when it counts down to 0.
+	 * Set PWM mode, it makes output to toggle and width of low and high
+	 * periods are set by Load Count registers.
+	 */
+	ctrl = DWC_TIM_CTRL_MODE_USER | DWC_TIM_CTRL_PWM;
+	dwc_pwm_writel(dwc, ctrl, DWC_TIM_CTRL(pwm->hwpwm));
+
+	/*
+	 * Enable timer. Output starts from low period.
+	 */
+	__dwc_pwm_set_enable(dwc, pwm->hwpwm, state->enabled);
+
+	return 0;
+}
+
+static int dwc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+
+	if (state->polarity != PWM_POLARITY_INVERSED)
+		return -EINVAL;
+
+	if (state->enabled) {
+		if (!pwm->state.enabled)
+			pm_runtime_get_sync(chip->dev);
+		return __dwc_pwm_configure_timer(dwc, pwm, state);
+	} else {
+		if (pwm->state.enabled) {
+			__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
+			pm_runtime_put_sync(chip->dev);
+		}
+	}
+
+	return 0;
+}
+
+static int dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			     struct pwm_state *state)
+{
+	struct dwc_pwm *dwc = to_dwc_pwm(chip);
+	u64 duty, period;
+
+	pm_runtime_get_sync(chip->dev);
+
+	state->enabled = !!(dwc_pwm_readl(dwc,
+				DWC_TIM_CTRL(pwm->hwpwm)) & DWC_TIM_CTRL_EN);
+
+	duty = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
+	duty += 1;
+	duty *= DWC_CLK_PERIOD_NS;
+	state->duty_cycle = duty;
+
+	period = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
+	period += 1;
+	period *= DWC_CLK_PERIOD_NS;
+	period += duty;
+	state->period = period;
+
+	state->polarity = PWM_POLARITY_INVERSED;
+
+	pm_runtime_put_sync(chip->dev);
+
+	return 0;
+}
+
+static const struct pwm_ops dwc_pwm_ops = {
+	.apply = dwc_pwm_apply,
+	.get_state = dwc_pwm_get_state,
+};
+
+struct dwc_pwm *dwc_pwm_alloc(struct device *dev)
+{
+	struct dwc_pwm *dwc;
+
+	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
+	if (!dwc)
+		return NULL;
+
+	dwc->chip.dev = dev;
+	dwc->chip.ops = &dwc_pwm_ops;
+	dwc->chip.npwm = DWC_TIMERS_TOTAL;
+
+	dev_set_drvdata(dev, dwc);
+	return dwc;
+}
+EXPORT_SYMBOL_GPL(dwc_pwm_alloc);
+
+MODULE_AUTHOR("Felipe Balbi (Intel)");
+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@linux.intel.com>");
+MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>");
+MODULE_DESCRIPTION("DesignWare PWM Controller");
+MODULE_LICENSE("GPL");

drivers/pwm/pwm-dwc.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- * DesignWare PWM Controller driver
+ * DesignWare PWM Controller driver (PCI part)
  *
  * Copyright (C) 2018-2020 Intel Corporation
  *
@@ -13,6 +13,8 @@
  *   periods are one or more input clock periods long.
  */
 
+#define DEFAULT_MOUDLE_NAMESPACE dwc_pwm
+
 #include <linux/bitops.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
@@ -21,197 +23,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/pwm.h>
 
-#define DWC_TIM_LD_CNT(n)	((n) * 0x14)
-#define DWC_TIM_LD_CNT2(n)	(((n) * 4) + 0xb0)
-#define DWC_TIM_CUR_VAL(n)	(((n) * 0x14) + 0x04)
-#define DWC_TIM_CTRL(n)		(((n) * 0x14) + 0x08)
-#define DWC_TIM_EOI(n)		(((n) * 0x14) + 0x0c)
-#define DWC_TIM_INT_STS(n)	(((n) * 0x14) + 0x10)
-
-#define DWC_TIMERS_INT_STS	0xa0
-#define DWC_TIMERS_EOI		0xa4
-#define DWC_TIMERS_RAW_INT_STS	0xa8
-#define DWC_TIMERS_COMP_VERSION	0xac
-
-#define DWC_TIMERS_TOTAL	8
-#define DWC_CLK_PERIOD_NS	10
-
-/* Timer Control Register */
-#define DWC_TIM_CTRL_EN		BIT(0)
-#define DWC_TIM_CTRL_MODE	BIT(1)
-#define DWC_TIM_CTRL_MODE_FREE	(0 << 1)
-#define DWC_TIM_CTRL_MODE_USER	(1 << 1)
-#define DWC_TIM_CTRL_INT_MASK	BIT(2)
-#define DWC_TIM_CTRL_PWM	BIT(3)
-
-struct dwc_pwm_ctx {
-	u32 cnt;
-	u32 cnt2;
-	u32 ctrl;
-};
-
-struct dwc_pwm {
-	struct pwm_chip chip;
-	void __iomem *base;
-	struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
-};
-#define to_dwc_pwm(p)	(container_of((p), struct dwc_pwm, chip))
-
-static inline u32 dwc_pwm_readl(struct dwc_pwm *dwc, u32 offset)
-{
-	return readl(dwc->base + offset);
-}
-
-static inline void dwc_pwm_writel(struct dwc_pwm *dwc, u32 value, u32 offset)
-{
-	writel(value, dwc->base + offset);
-}
-
-static void __dwc_pwm_set_enable(struct dwc_pwm *dwc, int pwm, int enabled)
-{
-	u32 reg;
-
-	reg = dwc_pwm_readl(dwc, DWC_TIM_CTRL(pwm));
-
-	if (enabled)
-		reg |= DWC_TIM_CTRL_EN;
-	else
-		reg &= ~DWC_TIM_CTRL_EN;
-
-	dwc_pwm_writel(dwc, reg, DWC_TIM_CTRL(pwm));
-}
-
-static int __dwc_pwm_configure_timer(struct dwc_pwm *dwc,
-				     struct pwm_device *pwm,
-				     const struct pwm_state *state)
-{
-	u64 tmp;
-	u32 ctrl;
-	u32 high;
-	u32 low;
-
-	/*
-	 * Calculate width of low and high period in terms of input clock
-	 * periods and check are the result within HW limits between 1 and
-	 * 2^32 periods.
-	 */
-	tmp = DIV_ROUND_CLOSEST_ULL(state->duty_cycle, DWC_CLK_PERIOD_NS);
-	if (tmp < 1 || tmp > (1ULL << 32))
-		return -ERANGE;
-	low = tmp - 1;
-
-	tmp = DIV_ROUND_CLOSEST_ULL(state->period - state->duty_cycle,
-				    DWC_CLK_PERIOD_NS);
-	if (tmp < 1 || tmp > (1ULL << 32))
-		return -ERANGE;
-	high = tmp - 1;
-
-	/*
-	 * Specification says timer usage flow is to disable timer, then
-	 * program it followed by enable. It also says Load Count is loaded
-	 * into timer after it is enabled - either after a disable or
-	 * a reset. Based on measurements it happens also without disable
-	 * whenever Load Count is updated. But follow the specification.
-	 */
-	__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
-
-	/*
-	 * Write Load Count and Load Count 2 registers. Former defines the
-	 * width of low period and latter the width of high period in terms
-	 * multiple of input clock periods:
-	 * Width = ((Count + 1) * input clock period).
-	 */
-	dwc_pwm_writel(dwc, low, DWC_TIM_LD_CNT(pwm->hwpwm));
-	dwc_pwm_writel(dwc, high, DWC_TIM_LD_CNT2(pwm->hwpwm));
-
-	/*
-	 * Set user-defined mode, timer reloads from Load Count registers
-	 * when it counts down to 0.
-	 * Set PWM mode, it makes output to toggle and width of low and high
-	 * periods are set by Load Count registers.
-	 */
-	ctrl = DWC_TIM_CTRL_MODE_USER | DWC_TIM_CTRL_PWM;
-	dwc_pwm_writel(dwc, ctrl, DWC_TIM_CTRL(pwm->hwpwm));
-
-	/*
-	 * Enable timer. Output starts from low period.
-	 */
-	__dwc_pwm_set_enable(dwc, pwm->hwpwm, state->enabled);
-
-	return 0;
-}
-
-static int dwc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
-			 const struct pwm_state *state)
-{
-	struct dwc_pwm *dwc = to_dwc_pwm(chip);
-
-	if (state->polarity != PWM_POLARITY_INVERSED)
-		return -EINVAL;
-
-	if (state->enabled) {
-		if (!pwm->state.enabled)
-			pm_runtime_get_sync(chip->dev);
-		return __dwc_pwm_configure_timer(dwc, pwm, state);
-	} else {
-		if (pwm->state.enabled) {
-			__dwc_pwm_set_enable(dwc, pwm->hwpwm, false);
-			pm_runtime_put_sync(chip->dev);
-		}
-	}
-
-	return 0;
-}
-
-static int dwc_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
-			     struct pwm_state *state)
-{
-	struct dwc_pwm *dwc = to_dwc_pwm(chip);
-	u64 duty, period;
-
-	pm_runtime_get_sync(chip->dev);
-
-	state->enabled = !!(dwc_pwm_readl(dwc,
-				DWC_TIM_CTRL(pwm->hwpwm)) & DWC_TIM_CTRL_EN);
-
-	duty = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(pwm->hwpwm));
-	duty += 1;
-	duty *= DWC_CLK_PERIOD_NS;
-	state->duty_cycle = duty;
-
-	period = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(pwm->hwpwm));
-	period += 1;
-	period *= DWC_CLK_PERIOD_NS;
-	period += duty;
-	state->period = period;
-
-	state->polarity = PWM_POLARITY_INVERSED;
-
-	pm_runtime_put_sync(chip->dev);
-
-	return 0;
-}
-
-static const struct pwm_ops dwc_pwm_ops = {
-	.apply = dwc_pwm_apply,
-	.get_state = dwc_pwm_get_state,
-};
-
-static struct dwc_pwm *dwc_pwm_alloc(struct device *dev)
-{
-	struct dwc_pwm *dwc;
-
-	dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL);
-	if (!dwc)
-		return NULL;
-
-	dwc->chip.dev = dev;
-	dwc->chip.ops = &dwc_pwm_ops;
-	dwc->chip.npwm = DWC_TIMERS_TOTAL;
-
-	dev_set_drvdata(dev, dwc);
-	return dwc;
-}
+#include "pwm-dwc.h"
 
 static int dwc_pwm_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {

drivers/pwm/pwm-dwc.h

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DesignWare PWM Controller driver
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ *
+ * Author: Felipe Balbi (Intel)
+ * Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
+ * Author: Raymond Tan <raymond.tan@intel.com>
+ */
+
+MODULE_IMPORT_NS(dwc_pwm);
+
+#define DWC_TIM_LD_CNT(n)	((n) * 0x14)
+#define DWC_TIM_LD_CNT2(n)	(((n) * 4) + 0xb0)
+#define DWC_TIM_CUR_VAL(n)	(((n) * 0x14) + 0x04)
+#define DWC_TIM_CTRL(n)		(((n) * 0x14) + 0x08)
+#define DWC_TIM_EOI(n)		(((n) * 0x14) + 0x0c)
+#define DWC_TIM_INT_STS(n)	(((n) * 0x14) + 0x10)
+
+#define DWC_TIMERS_INT_STS	0xa0
+#define DWC_TIMERS_EOI		0xa4
+#define DWC_TIMERS_RAW_INT_STS	0xa8
+#define DWC_TIMERS_COMP_VERSION	0xac
+
+#define DWC_TIMERS_TOTAL	8
+#define DWC_CLK_PERIOD_NS	10
+
+/* Timer Control Register */
+#define DWC_TIM_CTRL_EN		BIT(0)
+#define DWC_TIM_CTRL_MODE	BIT(1)
+#define DWC_TIM_CTRL_MODE_FREE	(0 << 1)
+#define DWC_TIM_CTRL_MODE_USER	(1 << 1)
+#define DWC_TIM_CTRL_INT_MASK	BIT(2)
+#define DWC_TIM_CTRL_PWM	BIT(3)
+
+struct dwc_pwm_ctx {
+	u32 cnt;
+	u32 cnt2;
+	u32 ctrl;
+};
+
+struct dwc_pwm {
+	struct pwm_chip chip;
+	void __iomem *base;
+	struct dwc_pwm_ctx ctx[DWC_TIMERS_TOTAL];
+};
+#define to_dwc_pwm(p)	(container_of((p), struct dwc_pwm, chip))
+
+static inline u32 dwc_pwm_readl(struct dwc_pwm *dwc, u32 offset)
+{
+	return readl(dwc->base + offset);
+}
+
+static inline void dwc_pwm_writel(struct dwc_pwm *dwc, u32 value, u32 offset)
+{
+	writel(value, dwc->base + offset);
+}
+
+extern struct dwc_pwm *dwc_pwm_alloc(struct device *dev);