Commit 721f3223 authored by Matthias Schwarzott's avatar Matthias Schwarzott Committed by Mauro Carvalho Chehab

[media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry

Unconditionally attaching Si2161/Si2165 demod driver
breaks Hauppauge WinTV Starburst.
So create own card entry for this.

Add card name comments to the subsystem ids.

This fixes a regression introduced in 3.17 by
36efec48 ([media] cx23885: Add si2165 support for HVR-5500)
Signed-off-by: default avatarMatthias Schwarzott <zzam@gentoo.org>
Tested-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
CC: stable@vger.kernel.org # for 3.17 and upper
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 3cb99af5
......@@ -614,7 +614,7 @@ struct cx23885_board cx23885_boards[] = {
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_HAUPPAUGE_HVR4400] = {
.name = "Hauppauge WinTV-HVR4400",
.name = "Hauppauge WinTV-HVR4400/HVR5500",
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
......@@ -622,6 +622,10 @@ struct cx23885_board cx23885_boards[] = {
.tuner_addr = 0x60, /* 0xc0 >> 1 */
.tuner_bus = 1,
},
[CX23885_BOARD_HAUPPAUGE_STARBURST] = {
.name = "Hauppauge WinTV Starburst",
.portb = CX23885_MPEG_DVB,
},
[CX23885_BOARD_AVERMEDIA_HC81R] = {
.name = "AVerTV Hybrid Express Slim HC81R",
.tuner_type = TUNER_XC2028,
......@@ -936,19 +940,19 @@ struct cx23885_subid cx23885_subids[] = {
}, {
.subvendor = 0x0070,
.subdevice = 0xc108,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-4400 (Model 121xxx, Hybrid DVB-T/S2, IR) */
}, {
.subvendor = 0x0070,
.subdevice = 0xc138,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
}, {
.subvendor = 0x0070,
.subdevice = 0xc12a,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
.card = CX23885_BOARD_HAUPPAUGE_STARBURST, /* Hauppauge WinTV Starburst (Model 121x00, DVB-S2, IR) */
}, {
.subvendor = 0x0070,
.subdevice = 0xc1f8,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400,
.card = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
}, {
.subvendor = 0x1461,
.subdevice = 0xd939,
......@@ -1545,8 +1549,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
break;
case CX23885_BOARD_HAUPPAUGE_HVR4400:
case CX23885_BOARD_HAUPPAUGE_STARBURST:
/* GPIO-8 tda10071 demod reset */
/* GPIO-9 si2165 demod reset */
/* GPIO-9 si2165 demod reset (only HVR4400/HVR5500)*/
/* Put the parts into reset and back */
cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
......@@ -1872,6 +1877,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR4400:
case CX23885_BOARD_HAUPPAUGE_STARBURST:
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
......@@ -1980,6 +1986,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_STARBURST:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_DVBSKY_T9580:
case CX23885_BOARD_DVBSKY_T982:
ts1->gen_ctrl_val = 0x5; /* Parallel */
......
......@@ -1710,6 +1710,17 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
case CX23885_BOARD_HAUPPAUGE_STARBURST:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(tda10071_attach,
&hauppauge_tda10071_config,
&i2c_bus->i2c_adap);
if (fe0->dvb.frontend != NULL) {
dvb_attach(a8293_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_a8293_config);
}
break;
case CX23885_BOARD_DVBSKY_T9580:
case CX23885_BOARD_DVBSKY_S950:
i2c_bus = &dev->i2c_bus[0];
......
......@@ -99,6 +99,7 @@
#define CX23885_BOARD_DVBSKY_S950 49
#define CX23885_BOARD_DVBSKY_S952 50
#define CX23885_BOARD_DVBSKY_T982 51
#define CX23885_BOARD_HAUPPAUGE_STARBURST 52
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment