Commit 7222a8a5 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki

Merge branches 'acpi-scan', 'acpi-misc', 'acpi-button' and 'acpi-dptf'

* acpi-scan:
  ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name

* acpi-misc:
  ACPI: GED: fix -Wformat
  ACPI: Fix whitespace inconsistencies

* acpi-button:
  ACPI: button: Add DMI quirk for Medion Akoya E2228T

* acpi-dptf:
  ACPI: DPTF: Support Alder Lake
......@@ -578,7 +578,7 @@ acpi_video_bqc_value_to_level(struct acpi_video_device *device,
ACPI_VIDEO_FIRST_LEVEL - 1 - bqc_value;
level = device->brightness->levels[bqc_value +
ACPI_VIDEO_FIRST_LEVEL];
ACPI_VIDEO_FIRST_LEVEL];
} else {
level = bqc_value;
}
......@@ -990,8 +990,8 @@ acpi_video_init_brightness(struct acpi_video_device *device)
goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"found %d brightness levels\n",
br->count - ACPI_VIDEO_FIRST_LEVEL));
"found %d brightness levels\n",
br->count - ACPI_VIDEO_FIRST_LEVEL));
return 0;
out_free_levels:
......
......@@ -987,7 +987,7 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume)
*/
if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) ||
(test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) &&
(battery->capacity_now <= battery->alarm)))
(battery->capacity_now <= battery->alarm)))
acpi_pm_wakeup_event(&battery->device->dev);
return result;
......
......@@ -89,7 +89,18 @@ static const struct dmi_system_id dmi_lid_quirks[] = {
*/
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
DMI_MATCH(DMI_PRODUCT_NAME, "E2215T MD60198"),
DMI_MATCH(DMI_PRODUCT_NAME, "E2215T"),
},
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
},
{
/*
* Medion Akoya E2228T, notification of the LID device only
* happens on close, not on open and _LID always returns closed.
*/
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
DMI_MATCH(DMI_PRODUCT_NAME, "E2228T"),
},
.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
},
......
......@@ -106,6 +106,7 @@ static int pch_fivr_remove(struct platform_device *pdev)
static const struct acpi_device_id pch_fivr_device_ids[] = {
{"INTC1045", 0},
{"INTC1049", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, pch_fivr_device_ids);
......
......@@ -229,6 +229,8 @@ static const struct acpi_device_id int3407_device_ids[] = {
{"INT3532", 0},
{"INTC1047", 0},
{"INTC1050", 0},
{"INTC1060", 0},
{"INTC1061", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, int3407_device_ids);
......
......@@ -25,10 +25,16 @@ static const struct acpi_device_id int340x_thermal_device_ids[] = {
{"INT340A"},
{"INT340B"},
{"INTC1040"},
{"INTC1041"},
{"INTC1043"},
{"INTC1044"},
{"INTC1045"},
{"INTC1046"},
{"INTC1047"},
{"INTC1048"},
{"INTC1049"},
{"INTC1060"},
{"INTC1061"},
{""},
};
......
......@@ -31,7 +31,7 @@ int acpi_notifier_call_chain(struct acpi_device *dev, u32 type, u32 data)
event.type = type;
event.data = data;
return (blocking_notifier_call_chain(&acpi_chain_head, 0, (void *)&event)
== NOTIFY_BAD) ? -EINVAL : 0;
== NOTIFY_BAD) ? -EINVAL : 0;
}
EXPORT_SYMBOL(acpi_notifier_call_chain);
......
......@@ -101,7 +101,7 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares,
switch (gsi) {
case 0 ... 255:
sprintf(ev_name, "_%c%02hhX",
sprintf(ev_name, "_%c%02X",
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
......
......@@ -27,6 +27,7 @@ static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
{"INT3404", 0},
{"INTC1044", 0},
{"INTC1048", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, fan_device_ids);
......
......@@ -134,7 +134,7 @@ int acpi_add_power_resource(acpi_handle handle);
void acpi_power_add_remove_device(struct acpi_device *adev, bool add);
int acpi_power_wakeup_list_init(struct list_head *list, int *system_level);
int acpi_device_sleep_wake(struct acpi_device *dev,
int enable, int sleep_state, int dev_state);
int enable, int sleep_state, int dev_state);
int acpi_power_get_inferred_state(struct acpi_device *device, int *state);
int acpi_power_on_resources(struct acpi_device *device, int state);
int acpi_power_transition(struct acpi_device *device, int state);
......
......@@ -2175,10 +2175,10 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
* these commands.
*/
enum nfit_aux_cmds {
NFIT_CMD_TRANSLATE_SPA = 5,
NFIT_CMD_ARS_INJECT_SET = 7,
NFIT_CMD_ARS_INJECT_CLEAR = 8,
NFIT_CMD_ARS_INJECT_GET = 9,
NFIT_CMD_TRANSLATE_SPA = 5,
NFIT_CMD_ARS_INJECT_SET = 7,
NFIT_CMD_ARS_INJECT_CLEAR = 8,
NFIT_CMD_ARS_INJECT_GET = 9,
};
static void acpi_nfit_init_dsms(struct acpi_nfit_desc *acpi_desc)
......@@ -2632,7 +2632,7 @@ static int acpi_nfit_blk_region_enable(struct nvdimm_bus *nvdimm_bus,
nfit_blk->bdw_offset = nfit_mem->bdw->offset;
mmio = &nfit_blk->mmio[BDW];
mmio->addr.base = devm_nvdimm_memremap(dev, nfit_mem->spa_bdw->address,
nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
nfit_mem->spa_bdw->length, nd_blk_memremap_flags(ndbr));
if (!mmio->addr.base) {
dev_dbg(dev, "%s failed to map bdw\n",
nvdimm_name(nvdimm));
......
......@@ -175,7 +175,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
* configure the IRQ assigned to this slot|dev|pin. The 'source_index'
* indicates which resource descriptor in the resource template (of
* the link device) this interrupt is allocated from.
*
*
* NOTE: Don't query the Link Device for IRQ information at this time
* because Link Device enumeration may not have occurred yet
* (e.g. exists somewhere 'below' this _PRT entry in the ACPI
......
......@@ -6,8 +6,8 @@
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
*
* TBD:
* 1. Support more than one IRQ resource entry per link device (index).
* TBD:
* 1. Support more than one IRQ resource entry per link device (index).
* 2. Implement start/stop mechanism and use ACPI Bus Driver facilities
* for IRQ management (e.g. start()->_SRS).
*/
......@@ -249,8 +249,8 @@ static int acpi_pci_link_get_current(struct acpi_pci_link *link)
}
}
/*
* Query and parse _CRS to get the current IRQ assignment.
/*
* Query and parse _CRS to get the current IRQ assignment.
*/
status = acpi_walk_resources(link->device->handle, METHOD_NAME__CRS,
......@@ -396,7 +396,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
/*
* "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt
* Link Devices to move the PIRQs around to minimize sharing.
*
*
* "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs
* that the BIOS has already set to active. This is necessary because
* ACPI has no automatic means of knowing what ISA IRQs are used. Note that
......@@ -414,7 +414,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
*
* Note that PCI IRQ routers have a list of possible IRQs,
* which may not include the IRQs this table says are available.
*
*
* Since this heuristic can't tell the difference between a link
* that no device will attach to, vs. a link which may be shared
* by multiple active devices -- it is not optimal.
......
......@@ -173,7 +173,7 @@ static int pci_mcfg_quirk_matches(struct mcfg_fixup *f, u16 segment,
{
if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
!memcmp(f->oem_table_id, mcfg_oem_table_id,
ACPI_OEM_TABLE_ID_SIZE) &&
ACPI_OEM_TABLE_ID_SIZE) &&
f->oem_revision == mcfg_oem_revision &&
f->segment == segment &&
resource_contains(&f->bus_range, bus_range))
......
......@@ -13,7 +13,7 @@
* 1. via "Device Specific (D-State) Control"
* 2. via "Power Resource Control".
* The code below deals with ACPI Power Resources control.
*
*
* An ACPI "power resource object" represents a software controllable power
* plane, clock plane, or other resource depended on by a device.
*
......@@ -645,7 +645,7 @@ int acpi_power_wakeup_list_init(struct list_head *list, int *system_level_p)
* -ENODEV if the execution of either _DSW or _PSW has failed
*/
int acpi_device_sleep_wake(struct acpi_device *dev,
int enable, int sleep_state, int dev_state)
int enable, int sleep_state, int dev_state)
{
union acpi_object in_arg[3];
struct acpi_object_list arg_list = { 3, in_arg };
......@@ -690,7 +690,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev,
/*
* Prepare a wakeup device, two steps (Ref ACPI 2.0:P229):
* 1. Power on the power resources required for the wakeup device
* 1. Power on the power resources required for the wakeup device
* 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power
* State Wake) for the device, if present
*/
......
......@@ -354,7 +354,7 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr)
(u32) px->control, (u32) px->status));
/*
* Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
* Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
*/
if (!px->core_frequency ||
((u32)(px->core_frequency * 1000) !=
......@@ -627,7 +627,7 @@ int acpi_processor_preregister_performance(
goto err_ret;
/*
* Now that we have _PSD data from all CPUs, lets setup P-state
* Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
for_each_possible_cpu(i) {
......@@ -693,7 +693,7 @@ int acpi_processor_preregister_performance(
if (match_pdomain->domain != pdomain->domain)
continue;
match_pr->performance->shared_type =
match_pr->performance->shared_type =
pr->performance->shared_type;
cpumask_copy(match_pr->performance->shared_cpu_map,
pr->performance->shared_cpu_map);
......
......@@ -366,7 +366,7 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
state_readers[i].mode,
ACPI_SBS_BATTERY,
state_readers[i].command,
(u8 *)battery +
(u8 *)battery +
state_readers[i].offset);
if (result)
goto end;
......
......@@ -176,7 +176,7 @@ int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 address,
EXPORT_SYMBOL_GPL(acpi_smbus_write);
int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
smbus_alarm_callback callback, void *context)
smbus_alarm_callback callback, void *context)
{
mutex_lock(&hc->lock);
hc->callback = callback;
......
......@@ -24,9 +24,9 @@ enum acpi_sbs_device_addr {
typedef void (*smbus_alarm_callback)(void *context);
extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address,
u8 command, u8 * data);
u8 command, u8 *data);
extern int acpi_smbus_write(struct acpi_smb_hc *hc, u8 protocol, u8 slave_address,
u8 command, u8 * data, u8 length);
u8 command, u8 *data, u8 length);
extern int acpi_smbus_register_callback(struct acpi_smb_hc *hc,
smbus_alarm_callback callback, void *context);
smbus_alarm_callback callback, void *context);
extern int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc);
......@@ -1453,7 +1453,7 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
}
/**
* acpi_dma_configure - Set-up DMA configuration for the device.
* acpi_dma_configure_id - Set-up DMA configuration for the device.
* @dev: The pointer to the device
* @attr: device dma attributes
* @input_id: input device id const value pointer
......
......@@ -178,14 +178,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
},
},
{
.callback = video_detect_force_video,
.ident = "ThinkPad X201T",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
},
},
{
.callback = video_detect_force_video,
.ident = "ThinkPad X201T",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201T"),
},
},
/* The native backlight controls do not work on some older machines */
{
......
......@@ -44,7 +44,7 @@ void acpi_enable_wakeup_devices(u8 sleep_state)
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
|| dev->wakeup.prepare_count))
|| dev->wakeup.prepare_count))
continue;
if (device_may_wakeup(&dev->dev))
......@@ -69,7 +69,7 @@ void acpi_disable_wakeup_devices(u8 sleep_state)
if (!dev->wakeup.flags.valid
|| sleep_state > (u32) dev->wakeup.sleep_state
|| !(device_may_wakeup(&dev->dev)
|| dev->wakeup.prepare_count))
|| dev->wakeup.prepare_count))
continue;
acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment