Commit 722c90eb authored by Stefan Ringel's avatar Stefan Ringel Committed by Mauro Carvalho Chehab

[media] cx23885: add Terratec Cinergy T PCIe dual

Signed-off-by: default avatarStefan Ringel <linuxtv@stefanringel.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent b247377a
......@@ -492,6 +492,11 @@ struct cx23885_board cx23885_boards[] = {
CX25840_VIN7_CH3,
},
},
},
[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
.name = "TerraTec Cinergy T PCIe Dual",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
}
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
......@@ -696,6 +701,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x14f1,
.subdevice = 0x8502,
.card = CX23885_BOARD_MYGICA_X8507,
}, {
.subvendor = 0x153b,
.subdevice = 0x117e,
.card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
......@@ -1458,6 +1467,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
break;
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
......@@ -1530,6 +1540,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_MPX885:
case CX23885_BOARD_MYGICA_X8507:
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
......
......@@ -61,6 +61,8 @@
#include "cx23885-f300.h"
#include "altera-ci.h"
#include "stv0367.h"
#include "drxk.h"
#include "mt2063.h"
static unsigned int debug;
......@@ -600,6 +602,24 @@ static struct xc5000_config netup_xc5000_config[] = {
},
};
static struct drxk_config terratec_drxk_config[] = {
{
.adr = 0x29,
.no_i2c_bridge = 1,
}, {
.adr = 0x2a,
.no_i2c_bridge = 1,
},
};
static struct mt2063_config terratec_mt2063_config[] = {
{
.tuner_address = 0x60,
}, {
.tuner_address = 0x67,
},
};
int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{
struct cx23885_dev *dev = (struct cx23885_dev *)device;
......@@ -1115,6 +1135,39 @@ static int dvb_register(struct cx23885_tsport *port)
goto frontend_detach;
}
break;
case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
i2c_bus = &dev->i2c_bus[0];
i2c_bus2 = &dev->i2c_bus[1];
switch (port->nr) {
/* port b */
case 1:
fe0->dvb.frontend = dvb_attach(drxk_attach,
&terratec_drxk_config[0],
&i2c_bus->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(mt2063_attach,
fe0->dvb.frontend,
&terratec_mt2063_config[0],
&i2c_bus2->i2c_adap))
goto frontend_detach;
}
break;
/* port c */
case 2:
fe0->dvb.frontend = dvb_attach(drxk_attach,
&terratec_drxk_config[1],
&i2c_bus->i2c_adap);
if (fe0->dvb.frontend != NULL) {
if (!dvb_attach(mt2063_attach,
fe0->dvb.frontend,
&terratec_mt2063_config[1],
&i2c_bus2->i2c_adap))
goto frontend_detach;
}
break;
}
break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
......
......@@ -88,6 +88,7 @@
#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31
#define CX23885_BOARD_MPX885 32
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment