Commit 7259124e authored by Jimmy Assarsson's avatar Jimmy Assarsson Committed by Marc Kleine-Budde

can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c

First part of adding support for Kvaser USB device family "hydra".

Split kvaser_usb.c into kvaser_usb/kvaser_usb{.h,_core.c,_leaf.c}.

kvaser_usb_core.c contains common functionality, such as USB
writing/reading and allocation of netdev.
kvaser_usb_leaf.c contains device specific code, used in
kvaser_usb_core.c.

struct kvaser_usb_dev_ops contains device specific functions that are
common for all devices in the family. While, struct kvaser_usb_dev_cfg
describes the device configurations in terms of CAN clock frequency,
timestamp frequency and CAN controller bittiming constants.
Signed-off-by: default avatarJimmy Assarsson <extja@kvaser.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent e0543f24
...@@ -7,7 +7,7 @@ obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o ...@@ -7,7 +7,7 @@ obj-$(CONFIG_CAN_8DEV_USB) += usb_8dev.o
obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
obj-$(CONFIG_CAN_GS_USB) += gs_usb.o obj-$(CONFIG_CAN_GS_USB) += gs_usb.o
obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb/
obj-$(CONFIG_CAN_MCBA_USB) += mcba_usb.o obj-$(CONFIG_CAN_MCBA_USB) += mcba_usb.o
obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/ obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/
obj-$(CONFIG_CAN_UCAN) += ucan.o obj-$(CONFIG_CAN_UCAN) += ucan.o
obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
kvaser_usb-y = kvaser_usb_core.o kvaser_usb_leaf.o
/* SPDX-License-Identifier: GPL-2.0 */
/* Parts of this driver are based on the following:
* - Kvaser linux leaf driver (version 4.78)
* - CAN driver for esd CAN-USB/2
* - Kvaser linux usbcanII driver (version 5.3)
*
* Copyright (C) 2002-2018 KVASER AB, Sweden. All rights reserved.
* Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
* Copyright (C) 2012 Olivier Sobrie <olivier@sobrie.be>
* Copyright (C) 2015 Valeo S.A.
*/
#ifndef KVASER_USB_H
#define KVASER_USB_H
/* Kvaser USB CAN dongles are divided into two major families:
* - Leaf: Based on Renesas M32C, running firmware labeled as 'filo'
* - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios'
*/
#include <linux/completion.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/usb.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#define KVASER_USB_MAX_RX_URBS 4
#define KVASER_USB_MAX_TX_URBS 128
#define KVASER_USB_TIMEOUT 1000 /* msecs */
#define KVASER_USB_RX_BUFFER_SIZE 3072
#define KVASER_USB_MAX_NET_DEVICES 3
/* USB devices features */
#define KVASER_USB_HAS_SILENT_MODE BIT(0)
#define KVASER_USB_HAS_TXRX_ERRORS BIT(1)
struct kvaser_usb_dev_cfg;
enum kvaser_usb_leaf_family {
KVASER_LEAF,
KVASER_USBCAN,
};
struct kvaser_usb_dev_card_data {
u32 ctrlmode_supported;
struct {
enum kvaser_usb_leaf_family family;
} leaf;
};
/* Context for an outstanding, not yet ACKed, transmission */
struct kvaser_usb_tx_urb_context {
struct kvaser_usb_net_priv *priv;
u32 echo_index;
int dlc;
};
struct kvaser_usb {
struct usb_device *udev;
struct usb_interface *intf;
struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES];
const struct kvaser_usb_dev_ops *ops;
const struct kvaser_usb_dev_cfg *cfg;
struct usb_endpoint_descriptor *bulk_in, *bulk_out;
struct usb_anchor rx_submitted;
/* @max_tx_urbs: Firmware-reported maximum number of outstanding,
* not yet ACKed, transmissions on this device. This value is
* also used as a sentinel for marking free tx contexts.
*/
u32 fw_version;
unsigned int nchannels;
unsigned int max_tx_urbs;
struct kvaser_usb_dev_card_data card_data;
bool rxinitdone;
void *rxbuf[KVASER_USB_MAX_RX_URBS];
dma_addr_t rxbuf_dma[KVASER_USB_MAX_RX_URBS];
};
struct kvaser_usb_net_priv {
struct can_priv can;
struct can_berr_counter bec;
struct kvaser_usb *dev;
struct net_device *netdev;
int channel;
struct completion start_comp, stop_comp;
struct usb_anchor tx_submitted;
spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */
int active_tx_contexts;
struct kvaser_usb_tx_urb_context tx_contexts[];
};
/**
* struct kvaser_usb_dev_ops - Device specific functions
* @dev_set_mode: used for can.do_set_mode
* @dev_set_bittiming: used for can.do_set_bittiming
* @dev_get_berr_counter: used for can.do_get_berr_counter
*
* @dev_setup_endpoints: setup USB in and out endpoints
* @dev_init_card: initialize card
* @dev_get_software_info: get software info
* @dev_get_card_info: get card info
*
* @dev_set_opt_mode: set ctrlmod
* @dev_start_chip: start the CAN controller
* @dev_stop_chip: stop the CAN controller
* @dev_reset_chip: reset the CAN controller
* @dev_flush_queue: flush outstanding CAN messages
* @dev_read_bulk_callback: handle incoming commands
* @dev_frame_to_cmd: translate struct can_frame into device command
*/
struct kvaser_usb_dev_ops {
int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode);
int (*dev_set_bittiming)(struct net_device *netdev);
int (*dev_get_berr_counter)(const struct net_device *netdev,
struct can_berr_counter *bec);
int (*dev_setup_endpoints)(struct kvaser_usb *dev);
int (*dev_init_card)(struct kvaser_usb *dev);
int (*dev_get_software_info)(struct kvaser_usb *dev);
int (*dev_get_card_info)(struct kvaser_usb *dev);
int (*dev_set_opt_mode)(const struct kvaser_usb_net_priv *priv);
int (*dev_start_chip)(struct kvaser_usb_net_priv *priv);
int (*dev_stop_chip)(struct kvaser_usb_net_priv *priv);
int (*dev_reset_chip)(struct kvaser_usb *dev, int channel);
int (*dev_flush_queue)(struct kvaser_usb_net_priv *priv);
void (*dev_read_bulk_callback)(struct kvaser_usb *dev, void *buf,
int len);
void *(*dev_frame_to_cmd)(const struct kvaser_usb_net_priv *priv,
const struct sk_buff *skb, int *frame_len,
int *cmd_len, u16 transid);
};
struct kvaser_usb_dev_cfg {
const struct can_clock clock;
const unsigned int timestamp_freq;
const struct can_bittiming_const * const bittiming_const;
const struct can_bittiming_const * const data_bittiming_const;
};
extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops;
int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len,
int *actual_len);
int kvaser_usb_send_cmd(const struct kvaser_usb *dev, void *cmd, int len);
int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
int len);
int kvaser_usb_can_rx_over_error(struct net_device *netdev);
#endif /* KVASER_USB_H */
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment