Commit 7272e051 authored by Brian Austin's avatar Brian Austin Committed by Mark Brown

ASoC: cs42l51: Fix SOC_DOUBLE_R_SX_TLV shift values for ADC, PCM, and Analog kcontrols

The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros
Fixed the TLV for aout_tlv to show -102dB correctly

Fixes: 1d99f243 (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV)
Reported-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: default avatarBrian Austin <brian.austin@cirrus.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
parent 38dbfb59
......@@ -124,9 +124,8 @@ static int cs42l51_set_chan_mix(struct snd_kcontrol *kcontrol,
static const DECLARE_TLV_DB_SCALE(adc_pcm_tlv, -5150, 50, 0);
static const DECLARE_TLV_DB_SCALE(tone_tlv, -1050, 150, 0);
/* This is a lie. after -102 db, it stays at -102 */
/* maybe a range would be better */
static const DECLARE_TLV_DB_SCALE(aout_tlv, -11550, 50, 0);
static const DECLARE_TLV_DB_SCALE(aout_tlv, -10200, 50, 0);
static const DECLARE_TLV_DB_SCALE(boost_tlv, 1600, 1600, 0);
static const char *chan_mix[] = {
......@@ -141,7 +140,7 @@ static const struct soc_enum cs42l51_chan_mix =
static const struct snd_kcontrol_new cs42l51_snd_controls[] = {
SOC_DOUBLE_R_SX_TLV("PCM Playback Volume",
CS42L51_PCMA_VOL, CS42L51_PCMB_VOL,
6, 0x19, 0x7F, adc_pcm_tlv),
0, 0x19, 0x7F, adc_pcm_tlv),
SOC_DOUBLE_R("PCM Playback Switch",
CS42L51_PCMA_VOL, CS42L51_PCMB_VOL, 7, 1, 1),
SOC_DOUBLE_R_SX_TLV("Analog Playback Volume",
......@@ -149,7 +148,7 @@ static const struct snd_kcontrol_new cs42l51_snd_controls[] = {
0, 0x34, 0xE4, aout_tlv),
SOC_DOUBLE_R_SX_TLV("ADC Mixer Volume",
CS42L51_ADCA_VOL, CS42L51_ADCB_VOL,
6, 0x19, 0x7F, adc_pcm_tlv),
0, 0x19, 0x7F, adc_pcm_tlv),
SOC_DOUBLE_R("ADC Mixer Switch",
CS42L51_ADCA_VOL, CS42L51_ADCB_VOL, 7, 1, 1),
SOC_SINGLE("Playback Deemphasis Switch", CS42L51_DAC_CTL, 3, 1, 0),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment