Commit 72df68ca authored by Rafael J. Wysocki's avatar Rafael J. Wysocki Committed by Len Brown

Hibernation: Move low level resume to disk.c

Move the low level restore code to kernel/power/disk.c , since the
corresponding low level hibernation code is already there.

Make restore fail if device_power_down(PMSG_PRETHAW) returns an
error.
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent 2ed43b63
...@@ -274,6 +274,53 @@ int hibernation_snapshot(int platform_mode) ...@@ -274,6 +274,53 @@ int hibernation_snapshot(int platform_mode)
return error; return error;
} }
/**
* resume_target_kernel - prepare devices that need to be suspended with
* interrupts off, restore the contents of highmem that have not been
* restored yet from the image and run the low level code that will restore
* the remaining contents of memory and switch to the just restored target
* kernel.
*/
static int resume_target_kernel(void)
{
int error;
local_irq_disable();
error = device_power_down(PMSG_PRETHAW);
if (error) {
printk(KERN_ERR "Some devices failed to power down, "
"aborting resume\n");
goto Enable_irqs;
}
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
error = restore_highmem();
if (!error) {
error = swsusp_arch_resume();
/*
* The code below is only ever reached in case of a failure.
* Otherwise execution continues at place where
* swsusp_arch_suspend() was called
*/
BUG_ON(!error);
/* This call to restore_highmem() undos the previous one */
restore_highmem();
}
/*
* The only reason why swsusp_arch_resume() can fail is memory being
* very tight, so we have to free it as soon as we can to avoid
* subsequent failures
*/
swsusp_free();
restore_processor_state();
touch_softlockup_watchdog();
device_power_up();
Enable_irqs:
local_irq_enable();
return error;
}
/** /**
* hibernation_restore - quiesce devices and restore the hibernation * hibernation_restore - quiesce devices and restore the hibernation
* snapshot image. If successful, control returns in hibernation_snaphot() * snapshot image. If successful, control returns in hibernation_snaphot()
...@@ -297,7 +344,7 @@ int hibernation_restore(int platform_mode) ...@@ -297,7 +344,7 @@ int hibernation_restore(int platform_mode)
if (!error) { if (!error) {
error = disable_nonboot_cpus(); error = disable_nonboot_cpus();
if (!error) if (!error)
error = swsusp_resume(); error = resume_target_kernel();
enable_nonboot_cpus(); enable_nonboot_cpus();
} }
platform_restore_cleanup(platform_mode); platform_restore_cleanup(platform_mode);
......
...@@ -152,7 +152,6 @@ extern int swsusp_swap_in_use(void); ...@@ -152,7 +152,6 @@ extern int swsusp_swap_in_use(void);
extern int swsusp_check(void); extern int swsusp_check(void);
extern int swsusp_shrink_memory(void); extern int swsusp_shrink_memory(void);
extern void swsusp_free(void); extern void swsusp_free(void);
extern int swsusp_resume(void);
extern int swsusp_read(unsigned int *flags_p); extern int swsusp_read(unsigned int *flags_p);
extern int swsusp_write(unsigned int flags); extern int swsusp_write(unsigned int flags);
extern void swsusp_close(void); extern void swsusp_close(void);
......
...@@ -261,38 +261,3 @@ int swsusp_shrink_memory(void) ...@@ -261,38 +261,3 @@ int swsusp_shrink_memory(void)
return 0; return 0;
} }
int swsusp_resume(void)
{
int error;
local_irq_disable();
/* NOTE: device_power_down() is just a suspend() with irqs off;
* it has no special "power things down" semantics
*/
if (device_power_down(PMSG_PRETHAW))
printk(KERN_ERR "Some devices failed to power down, very bad\n");
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
error = restore_highmem();
if (!error) {
error = swsusp_arch_resume();
/* The code below is only ever reached in case of a failure.
* Otherwise execution continues at place where
* swsusp_arch_suspend() was called
*/
BUG_ON(!error);
/* This call to restore_highmem() undos the previous one */
restore_highmem();
}
/* The only reason why swsusp_arch_resume() can fail is memory being
* very tight, so we have to free it as soon as we can to avoid
* subsequent failures
*/
swsusp_free();
restore_processor_state();
touch_softlockup_watchdog();
device_power_up();
local_irq_enable();
return error;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment