Commit 734fe6f1 authored by Ville Syrjälä's avatar Ville Syrjälä

drm/i915: Store the m2 divider as a whole in bxt_clk_div

Get rid of the pointless m2 int vs. frac split in bxt_clk_div
and just store the whole divider as one.

v2: Document the full divider as a proper decimal number
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307233940.4161-5-ville.syrjala@linux.intel.comReviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
parent 8b080334
......@@ -2088,8 +2088,7 @@ struct bxt_clk_div {
int clock;
u32 p1;
u32 p2;
u32 m2_int;
u32 m2_frac;
u32 m2;
u32 n;
int vco;
......@@ -2097,13 +2096,14 @@ struct bxt_clk_div {
/* pre-calculated values for DP linkrates */
static const struct bxt_clk_div bxt_dp_clk_val[] = {
{ .clock = 162000, .p1 = 4, .p2 = 2, .m2_int = 32, .m2_frac = 1677722, .n = 1, },
{ .clock = 270000, .p1 = 4, .p2 = 1, .m2_int = 27, .m2_frac = 0, .n = 1, },
{ .clock = 540000, .p1 = 2, .p2 = 1, .m2_int = 27, .m2_frac = 0, .n = 1, },
{ .clock = 216000, .p1 = 3, .p2 = 2, .m2_int = 32, .m2_frac = 1677722, .n = 1, },
{ .clock = 243000, .p1 = 4, .p2 = 1, .m2_int = 24, .m2_frac = 1258291, .n = 1, },
{ .clock = 324000, .p1 = 4, .p2 = 1, .m2_int = 32, .m2_frac = 1677722, .n = 1, },
{ .clock = 432000, .p1 = 3, .p2 = 1, .m2_int = 32, .m2_frac = 1677722, .n = 1, },
/* m2 is .22 binary fixed point */
{ .clock = 162000, .p1 = 4, .p2 = 2, .n = 1, .m2 = 0x819999a /* 32.4 */ },
{ .clock = 270000, .p1 = 4, .p2 = 1, .n = 1, .m2 = 0x6c00000 /* 27.0 */ },
{ .clock = 540000, .p1 = 2, .p2 = 1, .n = 1, .m2 = 0x6c00000 /* 27.0 */ },
{ .clock = 216000, .p1 = 3, .p2 = 2, .n = 1, .m2 = 0x819999a /* 32.4 */ },
{ .clock = 243000, .p1 = 4, .p2 = 1, .n = 1, .m2 = 0x6133333 /* 24.3 */ },
{ .clock = 324000, .p1 = 4, .p2 = 1, .n = 1, .m2 = 0x819999a /* 32.4 */ },
{ .clock = 432000, .p1 = 3, .p2 = 1, .n = 1, .m2 = 0x819999a /* 32.4 */ },
};
static bool
......@@ -2130,8 +2130,7 @@ bxt_ddi_hdmi_pll_dividers(struct intel_crtc_state *crtc_state,
clk_div->p2 = best_clock.p2;
drm_WARN_ON(&i915->drm, best_clock.m1 != 2);
clk_div->n = best_clock.n;
clk_div->m2_int = best_clock.m2 >> 22;
clk_div->m2_frac = best_clock.m2 & ((1 << 22) - 1);
clk_div->m2 = best_clock.m2;
clk_div->vco = best_clock.vco;
......@@ -2200,11 +2199,11 @@ static bool bxt_ddi_set_dpll_hw_state(struct intel_crtc_state *crtc_state,
lanestagger = 0x02;
dpll_hw_state->ebb0 = PORT_PLL_P1(clk_div->p1) | PORT_PLL_P2(clk_div->p2);
dpll_hw_state->pll0 = PORT_PLL_M2_INT(clk_div->m2_int);
dpll_hw_state->pll0 = PORT_PLL_M2_INT(clk_div->m2 >> 22);
dpll_hw_state->pll1 = PORT_PLL_N(clk_div->n);
dpll_hw_state->pll2 = PORT_PLL_M2_FRAC(clk_div->m2_frac);
dpll_hw_state->pll2 = PORT_PLL_M2_FRAC(clk_div->m2 & 0x3fffff);
if (clk_div->m2_frac)
if (clk_div->m2 & 0x3fffff)
dpll_hw_state->pll3 = PORT_PLL_M2_FRAC_ENABLE;
dpll_hw_state->pll6 = PORT_PLL_PROP_COEFF(prop_coef) |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment