staging: r8188eu: remove ODM_CmnInfoUpdate function

This function does not improve code readability.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/hal/odm.c

@@ -385,46 +385,6 @@ void ODM_CmnInfoPtrArrayHook(struct odm_dm_struct *pDM_Odm, enum odm_common_info
 	}
 }
 
-/*  Update Band/CHannel/.. The values are dynamic but non-per-packet. */
-void ODM_CmnInfoUpdate(struct odm_dm_struct *pDM_Odm, u32 CmnInfo, u64 Value)
-{
-	/*  */
-	/*  This init variable may be changed in run time. */
-	/*  */
-	switch	(CmnInfo) {
-	case	ODM_CMNINFO_ABILITY:
-		pDM_Odm->SupportAbility = (u32)Value;
-		break;
-	case	ODM_CMNINFO_RF_TYPE:
-		pDM_Odm->RFType = (u8)Value;
-		break;
-	case	ODM_CMNINFO_WIFI_DIRECT:
-		pDM_Odm->bWIFI_Direct = (bool)Value;
-		break;
-	case	ODM_CMNINFO_WIFI_DISPLAY:
-		pDM_Odm->bWIFI_Display = (bool)Value;
-		break;
-	case	ODM_CMNINFO_LINK:
-		pDM_Odm->bLinked = (bool)Value;
-		break;
-	case	ODM_CMNINFO_RSSI_MIN:
-		pDM_Odm->RSSI_Min = (u8)Value;
-		break;
-	case	ODM_CMNINFO_DBG_COMP:
-		pDM_Odm->DebugComponents = Value;
-		break;
-	case	ODM_CMNINFO_DBG_LEVEL:
-		pDM_Odm->DebugLevel = (u32)Value;
-		break;
-	case	ODM_CMNINFO_RA_THRESHOLD_HIGH:
-		pDM_Odm->RateAdaptive.HighRSSIThresh = (u8)Value;
-		break;
-	case	ODM_CMNINFO_RA_THRESHOLD_LOW:
-		pDM_Odm->RateAdaptive.LowRSSIThresh = (u8)Value;
-		break;
-	}
-}
-
 void odm_CommonInfoSelfInit(struct odm_dm_struct *pDM_Odm)
 {
 	struct adapter *adapter = pDM_Odm->Adapter;
@@ -1179,8 +1139,7 @@ void odm_RSSIMonitorCheckCE(struct odm_dm_struct *pDM_Odm)
 		pdmpriv->EntryMinUndecoratedSmoothedPWDB = 0;
 
 	FindMinimumRSSI(Adapter);
-	ODM_CmnInfoUpdate(&pHalData->odmpriv, ODM_CMNINFO_RSSI_MIN,
-			  pdmpriv->MinUndecoratedPWDBForDM);
+	pHalData->odmpriv.RSSI_Min = pdmpriv->MinUndecoratedPWDBForDM;
 }
 
 /* 3============================================================ */

drivers/staging/rtl8188eu/hal/rtl8188e_dm.c

@@ -67,18 +67,18 @@ static void Init_ODM_ComInfo_88E(struct adapter *Adapter)
 
 
 	if (hal_data->rf_type == RF_1T1R)
-		ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_RF_TYPE, ODM_1T1R);
+		dm_odm->RFType = ODM_1T1R;
 	else if (hal_data->rf_type == RF_2T2R)
-		ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_RF_TYPE, ODM_2T2R);
+		dm_odm->RFType = ODM_2T2R;
 	else if (hal_data->rf_type == RF_1T2R)
-		ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_RF_TYPE, ODM_1T2R);
+		dm_odm->RFType = ODM_1T2R;
 
 	ODM_CmnInfoInit(dm_odm, ODM_CMNINFO_RF_ANTENNA_TYPE, hal_data->TRxAntDivType);
 
 	pdmpriv->InitODMFlag =	ODM_RF_CALIBRATION |
 				ODM_RF_TX_PWR_TRACK;
 
-	ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_ABILITY, pdmpriv->InitODMFlag);
+	dm_odm->SupportAbility = pdmpriv->InitODMFlag;
 }
 
 static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
@@ -109,7 +109,7 @@ static void Update_ODM_ComInfo_88E(struct adapter *Adapter)
 					ODM_RF_TX_PWR_TRACK;
 	}
 
-	ODM_CmnInfoUpdate(dm_odm, ODM_CMNINFO_ABILITY, pdmpriv->InitODMFlag);
+	dm_odm->SupportAbility = pdmpriv->InitODMFlag;
 
 	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_TX_UNI, &(Adapter->xmitpriv.tx_bytes));
 	ODM_CmnInfoHook(dm_odm, ODM_CMNINFO_RX_UNI, &(Adapter->recvpriv.rx_bytes));
@@ -166,7 +166,7 @@ void rtw_hal_dm_watchdog(struct adapter *Adapter)
 			bLinked = true;
 	}
 
-	ODM_CmnInfoUpdate(&hal_data->odmpriv, ODM_CMNINFO_LINK, bLinked);
+	hal_data->odmpriv.bLinked = bLinked;
 	ODM_DMWatchdog(&hal_data->odmpriv);
 skip_dm:
 	/*  Check GPIO to determine current RF on/off and Pbc status. */

drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c

@@ -165,10 +165,10 @@ void rtw_hal_set_odm_var(struct adapter *Adapter, enum hal_odm_variable eVariabl
 		}
 		break;
 	case HAL_ODM_P2P_STATE:
-			ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DIRECT, bSet);
+		podmpriv->bWIFI_Direct = bSet;
 		break;
 	case HAL_ODM_WIFI_DISPLAY_STATE:
-			ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DISPLAY, bSet);
+		podmpriv->bWIFI_Display = bSet;
 		break;
 	default:
 		break;