ASoC: use 'time_left' instead of 'timeout' with

Merge series from Wolfram Sang <wsa+renesas@sang-engineering.com>:

There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_*() functions causing patterns like:

        timeout = wait_for_completion_timeout(...)
        if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
obvious and self explaining.

This is part of a tree-wide series. The rest of the patches can be found here
(some parts may still be WIP):

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left

Because these patches are generated, I audit them before sending. This is why I
will send series step by step. Build bot is happy with these patches, though.
No functional changes intended.

sound/soc/codecs/wm8962.c

@@ -2886,7 +2886,7 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 {
 	struct wm8962_priv *wm8962 = snd_soc_component_get_drvdata(component);
 	struct _fll_div fll_div;
-	unsigned long timeout;
+	unsigned long time_left;
 	int ret;
 	int fll1 = 0;
 
@@ -2974,14 +2974,14 @@ static int wm8962_set_fll(struct snd_soc_component *component, int fll_id, int s
 	 * higher if we'll error out
 	 */
 	if (wm8962->irq)
-		timeout = msecs_to_jiffies(5);
+		time_left = msecs_to_jiffies(5);
 	else
-		timeout = msecs_to_jiffies(1);
+		time_left = msecs_to_jiffies(1);
 
-	timeout = wait_for_completion_timeout(&wm8962->fll_lock,
-					      timeout);
+	time_left = wait_for_completion_timeout(&wm8962->fll_lock,
+						time_left);
 
-	if (timeout == 0 && wm8962->irq) {
+	if (time_left == 0 && wm8962->irq) {
 		dev_err(component->dev, "FLL lock timed out");
 		snd_soc_component_update_bits(component, WM8962_FLL_CONTROL_1,
 				    WM8962_FLL_ENA, 0);

sound/soc/codecs/wm8993.c

@@ -470,7 +470,7 @@ static int _wm8993_set_fll(struct snd_soc_component *component, int fll_id, int
 	struct i2c_client *i2c = to_i2c_client(component->dev);
 	u16 reg1, reg4, reg5;
 	struct _fll_div fll_div;
-	unsigned int timeout;
+	unsigned long time_left;
 	int ret;
 
 	/* Any change? */
@@ -543,19 +543,19 @@ static int _wm8993_set_fll(struct snd_soc_component *component, int fll_id, int
 
 	/* If we've got an interrupt wired up make sure we get it */
 	if (i2c->irq)
-		timeout = msecs_to_jiffies(20);
+		time_left = msecs_to_jiffies(20);
 	else if (Fref < 1000000)
-		timeout = msecs_to_jiffies(3);
+		time_left = msecs_to_jiffies(3);
 	else
-		timeout = msecs_to_jiffies(1);
+		time_left = msecs_to_jiffies(1);
 
 	try_wait_for_completion(&wm8993->fll_lock);
 
 	/* Enable the FLL */
 	snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 
-	timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout);
-	if (i2c->irq && !timeout)
+	time_left = wait_for_completion_timeout(&wm8993->fll_lock, time_left);
+	if (i2c->irq && !time_left)
 		dev_warn(component->dev, "Timed out waiting for FLL\n");
 
 	dev_dbg(component->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);

sound/soc/codecs/wm8994.c

@@ -2210,7 +2210,7 @@ static int _wm8994_set_fll(struct snd_soc_component *component, int id, int src,
 	int reg_offset, ret;
 	struct fll_div fll;
 	u16 reg, clk1, aif_reg, aif_src;
-	unsigned long timeout;
+	unsigned long time_left;
 	bool was_enabled;
 	struct clk *mclk;
 
@@ -2403,9 +2403,9 @@ static int _wm8994_set_fll(struct snd_soc_component *component, int id, int src,
 				    WM8994_FLL1_FRAC, reg);
 
 		if (wm8994->fll_locked_irq) {
-			timeout = wait_for_completion_timeout(&wm8994->fll_locked[id],
-							      msecs_to_jiffies(10));
-			if (timeout == 0)
+			time_left = wait_for_completion_timeout(&wm8994->fll_locked[id],
+								msecs_to_jiffies(10));
+			if (time_left == 0)
 				dev_warn(component->dev,
 					 "Timed out waiting for FLL lock\n");
 		} else {

sound/soc/codecs/wm8996.c

@@ -655,28 +655,28 @@ static void wait_for_dc_servo(struct snd_soc_component *component, u16 mask)
 	struct i2c_client *i2c = to_i2c_client(component->dev);
 	struct wm8996_priv *wm8996 = snd_soc_component_get_drvdata(component);
 	int ret;
-	unsigned long timeout = 200;
+	unsigned long time_left = 200;
 
 	snd_soc_component_write(component, WM8996_DC_SERVO_2, mask);
 
 	/* Use the interrupt if possible */
 	do {
 		if (i2c->irq) {
-			timeout = wait_for_completion_timeout(&wm8996->dcs_done,
-							      msecs_to_jiffies(200));
-			if (timeout == 0)
+			time_left = wait_for_completion_timeout(&wm8996->dcs_done,
+								msecs_to_jiffies(200));
+			if (time_left == 0)
 				dev_err(component->dev, "DC servo timed out\n");
 
 		} else {
 			msleep(1);
-			timeout--;
+			time_left--;
 		}
 
 		ret = snd_soc_component_read(component, WM8996_DC_SERVO_2);
 		dev_dbg(component->dev, "DC servo state: %x\n", ret);
-	} while (timeout && ret & mask);
+	} while (time_left && ret & mask);
 
-	if (timeout == 0)
+	if (time_left == 0)
 		dev_err(component->dev, "DC servo timed out for %x\n", mask);
 	else
 		dev_dbg(component->dev, "DC servo complete for %x\n", mask);