crypto: starfive - Use dma for aes requests

Convert AES module to use dma for data transfers to reduce cpu load and
compatible with future variants.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/starfive/Kconfig

@@ -14,6 +14,10 @@ config CRYPTO_DEV_JH7110
 	select CRYPTO_RSA
 	select CRYPTO_AES
 	select CRYPTO_CCM
+	select CRYPTO_GCM
+	select CRYPTO_ECB
+	select CRYPTO_CBC
+	select CRYPTO_CTR
 	help
 	  Support for StarFive JH7110 crypto hardware acceleration engine.
 	  This module provides acceleration for public key algo,

drivers/crypto/starfive/jh7110-cryp.c

@@ -89,28 +89,10 @@ static void starfive_dma_cleanup(struct starfive_cryp_dev *cryp)
 	dma_release_channel(cryp->rx);
 }
 
-static irqreturn_t starfive_cryp_irq(int irq, void *priv)
-{
-	u32 status;
-	u32 mask;
-	struct starfive_cryp_dev *cryp = (struct starfive_cryp_dev *)priv;
-
-	mask = readl(cryp->base + STARFIVE_IE_MASK_OFFSET);
-	status = readl(cryp->base + STARFIVE_IE_FLAG_OFFSET);
-	if (status & STARFIVE_IE_FLAG_AES_DONE) {
-		mask |= STARFIVE_IE_MASK_AES_DONE;
-		writel(mask, cryp->base + STARFIVE_IE_MASK_OFFSET);
-		tasklet_schedule(&cryp->aes_done);
-	}
-
-	return IRQ_HANDLED;
-}
-
 static int starfive_cryp_probe(struct platform_device *pdev)
 {
 	struct starfive_cryp_dev *cryp;
 	struct resource *res;
-	int irq;
 	int ret;
 
 	cryp = devm_kzalloc(&pdev->dev, sizeof(*cryp), GFP_KERNEL);
@@ -125,8 +107,6 @@ static int starfive_cryp_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->base),
 				     "Error remapping memory for platform device\n");
 
-	tasklet_init(&cryp->aes_done, starfive_aes_done_task, (unsigned long)cryp);
-
 	cryp->phys_base = res->start;
 	cryp->dma_maxburst = 32;
 	cryp->side_chan = side_chan;
@@ -146,16 +126,6 @@ static int starfive_cryp_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->rst),
 				     "Error getting hardware reset line\n");
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	ret = devm_request_irq(&pdev->dev, irq, starfive_cryp_irq, 0, pdev->name,
-			       (void *)cryp);
-	if (ret)
-		return dev_err_probe(&pdev->dev, ret,
-				     "Failed to register interrupt handler\n");
-
 	clk_prepare_enable(cryp->hclk);
 	clk_prepare_enable(cryp->ahb);
 	reset_control_deassert(cryp->rst);
@@ -212,8 +182,6 @@ static int starfive_cryp_probe(struct platform_device *pdev)
 	clk_disable_unprepare(cryp->ahb);
 	reset_control_assert(cryp->rst);
 
-	tasklet_kill(&cryp->aes_done);
-
 	return ret;
 }
 
@@ -225,8 +193,6 @@ static void starfive_cryp_remove(struct platform_device *pdev)
 	starfive_hash_unregister_algs();
 	starfive_rsa_unregister_algs();
 
-	tasklet_kill(&cryp->aes_done);
-
 	crypto_engine_stop(cryp->engine);
 	crypto_engine_exit(cryp->engine);
 

drivers/crypto/starfive/jh7110-cryp.h

@@ -169,6 +169,7 @@ struct starfive_cryp_ctx {
 	struct crypto_akcipher			*akcipher_fbk;
 	struct crypto_ahash			*ahash_fbk;
 	struct crypto_aead			*aead_fbk;
+	struct crypto_skcipher			*skcipher_fbk;
 };
 
 struct starfive_cryp_dev {
@@ -186,10 +187,7 @@ struct starfive_cryp_dev {
 	struct dma_chan				*rx;
 	struct dma_slave_config			cfg_in;
 	struct dma_slave_config			cfg_out;
-	struct scatter_walk			in_walk;
-	struct scatter_walk			out_walk;
 	struct crypto_engine			*engine;
-	struct tasklet_struct			aes_done;
 	struct completion			dma_done;
 	size_t					assoclen;
 	size_t					total_in;
@@ -237,6 +235,4 @@ void starfive_rsa_unregister_algs(void);
 
 int starfive_aes_register_algs(void);
 void starfive_aes_unregister_algs(void);
-
-void starfive_aes_done_task(unsigned long param);
 #endif