Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

This pull includes the new Arm "komeda" DRM driver. It is currently hosted
in the same repo as the other "mali-dp" driver because it is the next
iteration of the IP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131173600.GN25147@e110455-lin.cambridge.arm.com

Documentation/devicetree/bindings/display/arm,komeda.txt

+Device Tree bindings for Arm Komeda display driver
+
+Required properties:
+- compatible: Should be "arm,mali-d71"
+- reg: Physical base address and length of the registers in the system
+- interrupts: the interrupt line number of the device in the system
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+    in 'clock-names'
+- clock-names: A list of clock names. It should contain:
+      - "mclk": for the main processor clock
+      - "pclk": for the APB interface clock
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Required properties for sub-node: pipeline@nq
+Each device contains one or two pipeline sub-nodes (at least one), each
+pipeline node should provide properties:
+- reg: Zero-indexed identifier for the pipeline
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+    in 'clock-names'
+- clock-names: should contain:
+      - "pxclk": pixel clock
+      - "aclk": AXI interface clock
+
+- port: each pipeline connect to an encoder input port. The connection is
+    modeled using the OF graph bindings specified in
+    Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+  - memory-region: phandle to a node describing memory (see
+    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+    to be used for the framebuffer; if not present, the framebuffer may
+    be located anywhere in memory.
+
+Example:
+/ {
+	...
+
+	dp0: display@c00000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,mali-d71";
+		reg = <0xc00000 0x20000>;
+		interrupts = <0 168 4>;
+		clocks = <&dpu_mclk>, <&dpu_aclk>;
+		clock-names = "mclk", "pclk";
+
+		dp0_pipe0: pipeline@0 {
+			clocks = <&fpgaosc2>, <&dpu_aclk>;
+			clock-names = "pxclk", "aclk";
+			reg = <0>;
+
+			port {
+				dp0_pipe0_out: endpoint {
+					remote-endpoint = <&db_dvi0_in>;
+				};
+			};
+		};
+
+		dp0_pipe1: pipeline@1 {
+			clocks = <&fpgaosc2>, <&dpu_aclk>;
+			clock-names = "pxclk", "aclk";
+			reg = <1>;
+
+			port {
+				dp0_pipe1_out: endpoint {
+					remote-endpoint = <&db_dvi1_in>;
+				};
+			};
+		};
+	};
+	...
+};

Documentation/gpu/afbc.rst

+.. SPDX-License-Identifier: GPL-2.0+
+
+===================================
+ Arm Framebuffer Compression (AFBC)
+===================================
+
+AFBC is a proprietary lossless image compression protocol and format.
+It provides fine-grained random access and minimizes the amount of
+data transferred between IP blocks.
+
+AFBC can be enabled on drivers which support it via use of the AFBC
+format modifiers defined in drm_fourcc.h. See DRM_FORMAT_MOD_ARM_AFBC(*).
+
+All users of the AFBC modifiers must follow the usage guidelines laid
+out in this document, to ensure compatibility across different AFBC
+producers and consumers.
+
+Components and Ordering
+=======================
+
+AFBC streams can contain several components - where a component
+corresponds to a color channel (i.e. R, G, B, X, A, Y, Cb, Cr).
+The assignment of input/output color channels must be consistent
+between the encoder and the decoder for correct operation, otherwise
+the consumer will interpret the decoded data incorrectly.
+
+Furthermore, when the lossless colorspace transform is used
+(AFBC_FORMAT_MOD_YTR, which should be enabled for RGB buffers for
+maximum compression efficiency), the component order must be:
+
+ * Component 0: R
+ * Component 1: G
+ * Component 2: B
+
+The component ordering is communicated via the fourcc code in the
+fourcc:modifier pair. In general, component '0' is considered to
+reside in the least-significant bits of the corresponding linear
+format. For example, COMP(bits):
+
+ * DRM_FORMAT_ABGR8888
+
+   * Component 0: R(8)
+   * Component 1: G(8)
+   * Component 2: B(8)
+   * Component 3: A(8)
+
+ * DRM_FORMAT_BGR888
+
+   * Component 0: R(8)
+   * Component 1: G(8)
+   * Component 2: B(8)
+
+ * DRM_FORMAT_YUYV
+
+   * Component 0: Y(8)
+   * Component 1: Cb(8, 2x1 subsampled)
+   * Component 2: Cr(8, 2x1 subsampled)
+
+In AFBC, 'X' components are not treated any differently from any other
+component. Therefore, an AFBC buffer with fourcc DRM_FORMAT_XBGR8888
+encodes with 4 components, like so:
+
+ * DRM_FORMAT_XBGR8888
+
+   * Component 0: R(8)
+   * Component 1: G(8)
+   * Component 2: B(8)
+   * Component 3: X(8)
+
+Please note, however, that the inclusion of a "wasted" 'X' channel is
+bad for compression efficiency, and so it's recommended to avoid
+formats containing 'X' bits. If a fourth component is
+required/expected by the encoder/decoder, then it is recommended to
+instead use an equivalent format with alpha, setting all alpha bits to
+'1'. If there is no requirement for a fourth component, then a format
+which doesn't include alpha can be used, e.g. DRM_FORMAT_BGR888.
+
+Number of Planes
+================
+
+Formats which are typically multi-planar in linear layouts (e.g. YUV
+420), can be encoded into one, or multiple, AFBC planes. As with
+component order, the encoder and decoder must agree about the number
+of planes in order to correctly decode the buffer. The fourcc code is
+used to determine the number of encoded planes in an AFBC buffer,
+matching the number of planes for the linear (unmodified) format.
+Within each plane, the component ordering also follows the fourcc
+code:
+
+For example:
+
+ * DRM_FORMAT_YUYV: nplanes = 1
+
+   * Plane 0:
+
+     * Component 0: Y(8)
+     * Component 1: Cb(8, 2x1 subsampled)
+     * Component 2: Cr(8, 2x1 subsampled)
+
+ * DRM_FORMAT_NV12: nplanes = 2
+
+   * Plane 0:
+
+     * Component 0: Y(8)
+
+   * Plane 1:
+
+     * Component 0: Cb(8, 2x1 subsampled)
+     * Component 1: Cr(8, 2x1 subsampled)
+
+Cross-device interoperability
+=============================
+
+For maximum compatibility across devices, the table below defines
+canonical formats for use between AFBC-enabled devices. Formats which
+are listed here must be used exactly as specified when using the AFBC
+modifiers. Formats which are not listed should be avoided.
+
+.. flat-table:: AFBC formats
+
+   * - Fourcc code
+     - Description
+     - Planes/Components
+
+   * - DRM_FORMAT_ABGR2101010
+     - 10-bit per component RGB, with 2-bit alpha
+     - Plane 0: 4 components
+              * Component 0: R(10)
+              * Component 1: G(10)
+              * Component 2: B(10)
+              * Component 3: A(2)
+
+   * - DRM_FORMAT_ABGR8888
+     - 8-bit per component RGB, with 8-bit alpha
+     - Plane 0: 4 components
+              * Component 0: R(8)
+              * Component 1: G(8)
+              * Component 2: B(8)
+              * Component 3: A(8)
+
+   * - DRM_FORMAT_BGR888
+     - 8-bit per component RGB
+     - Plane 0: 3 components
+              * Component 0: R(8)
+              * Component 1: G(8)
+              * Component 2: B(8)
+
+   * - DRM_FORMAT_BGR565
+     - 5/6-bit per component RGB
+     - Plane 0: 3 components
+              * Component 0: R(5)
+              * Component 1: G(6)
+              * Component 2: B(5)
+
+   * - DRM_FORMAT_ABGR1555
+     - 5-bit per component RGB, with 1-bit alpha
+     - Plane 0: 4 components
+              * Component 0: R(5)
+              * Component 1: G(5)
+              * Component 2: B(5)
+              * Component 3: A(1)
+
+   * - DRM_FORMAT_VUY888
+     - 8-bit per component YCbCr 444, single plane
+     - Plane 0: 3 components
+              * Component 0: Y(8)
+              * Component 1: Cb(8)
+              * Component 2: Cr(8)
+
+   * - DRM_FORMAT_VUY101010
+     - 10-bit per component YCbCr 444, single plane
+     - Plane 0: 3 components
+              * Component 0: Y(10)
+              * Component 1: Cb(10)
+              * Component 2: Cr(10)
+
+   * - DRM_FORMAT_YUYV
+     - 8-bit per component YCbCr 422, single plane
+     - Plane 0: 3 components
+              * Component 0: Y(8)
+              * Component 1: Cb(8, 2x1 subsampled)
+              * Component 2: Cr(8, 2x1 subsampled)
+
+   * - DRM_FORMAT_NV16
+     - 8-bit per component YCbCr 422, two plane
+     - Plane 0: 1 component
+              * Component 0: Y(8)
+       Plane 1: 2 components
+              * Component 0: Cb(8, 2x1 subsampled)
+              * Component 1: Cr(8, 2x1 subsampled)
+
+   * - DRM_FORMAT_Y210
+     - 10-bit per component YCbCr 422, single plane
+     - Plane 0: 3 components
+              * Component 0: Y(10)
+              * Component 1: Cb(10, 2x1 subsampled)
+              * Component 2: Cr(10, 2x1 subsampled)
+
+   * - DRM_FORMAT_P210
+     - 10-bit per component YCbCr 422, two plane
+     - Plane 0: 1 component
+              * Component 0: Y(10)
+       Plane 1: 2 components
+              * Component 0: Cb(10, 2x1 subsampled)
+              * Component 1: Cr(10, 2x1 subsampled)
+
+   * - DRM_FORMAT_YUV420_8BIT
+     - 8-bit per component YCbCr 420, single plane
+     - Plane 0: 3 components
+              * Component 0: Y(8)
+              * Component 1: Cb(8, 2x2 subsampled)
+              * Component 2: Cr(8, 2x2 subsampled)
+
+   * - DRM_FORMAT_YUV420_10BIT
+     - 10-bit per component YCbCr 420, single plane
+     - Plane 0: 3 components
+              * Component 0: Y(10)
+              * Component 1: Cb(10, 2x2 subsampled)
+              * Component 2: Cr(10, 2x2 subsampled)
+
+   * - DRM_FORMAT_NV12
+     - 8-bit per component YCbCr 420, two plane
+     - Plane 0: 1 component
+              * Component 0: Y(8)
+       Plane 1: 2 components
+              * Component 0: Cb(8, 2x2 subsampled)
+              * Component 1: Cr(8, 2x2 subsampled)
+
+   * - DRM_FORMAT_P010
+     - 10-bit per component YCbCr 420, two plane
+     - Plane 0: 1 component
+              * Component 0: Y(10)
+       Plane 1: 2 components
+              * Component 0: Cb(10, 2x2 subsampled)
+              * Component 1: Cr(10, 2x2 subsampled)

Documentation/gpu/drivers.rst

@@ -17,6 +17,8 @@ GPU Driver Documentation
    vkms
    bridge/dw-hdmi
    xen-front
+   afbc
+   komeda-kms
 
 .. only::  subproject and html
 

MAINTAINERS

@@ -1133,13 +1133,26 @@ S:	Supported
 F:	drivers/gpu/drm/arm/hdlcd_*
 F:	Documentation/devicetree/bindings/display/arm,hdlcd.txt
 
+ARM KOMEDA DRM-KMS DRIVER
+M:	James (Qian) Wang <james.qian.wang@arm.com>
+M:	Liviu Dudau <liviu.dudau@arm.com>
+L:	Mali DP Maintainers <malidp@foss.arm.com>
+S:	Supported
+T:	git git://linux-arm.org/linux-ld.git for-upstream/mali-dp
+F:	drivers/gpu/drm/arm/display/include/
+F:	drivers/gpu/drm/arm/display/komeda/
+F:	Documentation/devicetree/bindings/display/arm/arm,komeda.txt
+F:	Documentation/gpu/komeda-kms.rst
+
 ARM MALI-DP DRM DRIVER
 M:	Liviu Dudau <liviu.dudau@arm.com>
 M:	Brian Starkey <brian.starkey@arm.com>
-M:	Mali DP Maintainers <malidp@foss.arm.com>
+L:	Mali DP Maintainers <malidp@foss.arm.com>
 S:	Supported
+T:	git git://linux-arm.org/linux-ld.git for-upstream/mali-dp
 F:	drivers/gpu/drm/arm/
 F:	Documentation/devicetree/bindings/display/arm,malidp.txt
+F:	Documentation/gpu/afbc.rst
 
 ARM MFM AND FLOPPY DRIVERS
 M:	Ian Molton <spyro@f2s.com>

drivers/gpu/drm/Makefile

@@ -51,7 +51,7 @@ obj-$(CONFIG_DRM_DEBUG_SELFTEST) += selftests/
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
 obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
-obj-$(CONFIG_DRM_ARM)	+= arm/
+obj-y			+= arm/
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_SCHED)	+= scheduler/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/

drivers/gpu/drm/arm/Kconfig

-config DRM_ARM
-	bool
-	help
-	  Choose this option to select drivers for ARM's devices
+# SPDX-License-Identifier: GPL-2.0
+menu "ARM devices"
 
 config DRM_HDLCD
 	tristate "ARM HDLCD"
 	depends on DRM && OF && (ARM || ARM64)
 	depends on COMMON_CLK
-	select DRM_ARM
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	help
@@ -29,7 +26,6 @@ config DRM_MALI_DISPLAY
 	tristate "ARM Mali Display Processor"
 	depends on DRM && OF && (ARM || ARM64)
 	depends on COMMON_CLK
-	select DRM_ARM
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
@@ -40,3 +36,7 @@ config DRM_MALI_DISPLAY
 	  of the hardware.
 
 	  If compiled as a module it will be called mali-dp.
+
+source "drivers/gpu/drm/arm/display/Kconfig"
+
+endmenu

drivers/gpu/drm/arm/Makefile

@@ -3,3 +3,4 @@ obj-$(CONFIG_DRM_HDLCD)	+= hdlcd.o
 mali-dp-y := malidp_drv.o malidp_hw.o malidp_planes.o malidp_crtc.o
 mali-dp-y += malidp_mw.o
 obj-$(CONFIG_DRM_MALI_DISPLAY)	+= mali-dp.o
+obj-$(CONFIG_DRM_KOMEDA) += display/

drivers/gpu/drm/arm/display/Kbuild

+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_DRM_KOMEDA) += komeda/

drivers/gpu/drm/arm/display/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+config DRM_KOMEDA
+	tristate "ARM Komeda display driver"
+	depends on DRM && OF
+	depends on COMMON_CLK
+	select DRM_KMS_HELPER
+	select DRM_KMS_CMA_HELPER
+	select DRM_GEM_CMA_HELPER
+	select VIDEOMODE_HELPERS
+	help
+	  Choose this option if you want to compile the ARM Komeda display
+	  Processor driver. It supports the D71 variants of the hardware.
+
+	  If compiled as a module it will be called komeda.

drivers/gpu/drm/arm/display/include/malidp_io.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _MALIDP_IO_H_
+#define _MALIDP_IO_H_
+
+#include <linux/io.h>
+
+static inline u32
+malidp_read32(u32 __iomem *base, u32 offset)
+{
+	return readl((base + (offset >> 2)));
+}
+
+static inline void
+malidp_write32(u32 __iomem *base, u32 offset, u32 v)
+{
+	writel(v, (base + (offset >> 2)));
+}
+
+static inline void
+malidp_write32_mask(u32 __iomem *base, u32 offset, u32 m, u32 v)
+{
+	u32 tmp = malidp_read32(base, offset);
+
+	tmp &= (~m);
+	malidp_write32(base, offset, v | tmp);
+}
+
+static inline void
+malidp_write_group(u32 __iomem *base, u32 offset, int num, const u32 *values)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		malidp_write32(base, offset + i * 4, values[i]);
+}
+
+#endif /*_MALIDP_IO_H_*/

drivers/gpu/drm/arm/display/include/malidp_product.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _MALIDP_PRODUCT_H_
+#define _MALIDP_PRODUCT_H_
+
+/* Product identification */
+#define MALIDP_CORE_ID(__product, __major, __minor, __status) \
+	((((__product) & 0xFFFF) << 16) | (((__major) & 0xF) << 12) | \
+	(((__minor) & 0xF) << 8) | ((__status) & 0xFF))
+
+#define MALIDP_CORE_ID_PRODUCT_ID(__core_id) ((__u32)(__core_id) >> 16)
+#define MALIDP_CORE_ID_MAJOR(__core_id)      (((__u32)(__core_id) >> 12) & 0xF)
+#define MALIDP_CORE_ID_MINOR(__core_id)      (((__u32)(__core_id) >> 8) & 0xF)
+#define MALIDP_CORE_ID_STATUS(__core_id)     (((__u32)(__core_id)) & 0xFF)
+
+/* Mali-display product IDs */
+#define MALIDP_D71_PRODUCT_ID   0x0071
+
+#endif /* _MALIDP_PRODUCT_H_ */

drivers/gpu/drm/arm/display/include/malidp_utils.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _MALIDP_UTILS_
+#define _MALIDP_UTILS_
+
+#define has_bit(nr, mask)	(BIT(nr) & (mask))
+#define has_bits(bits, mask)	(((bits) & (mask)) == (bits))
+
+#define dp_for_each_set_bit(bit, mask) \
+	for_each_set_bit((bit), ((unsigned long *)&(mask)), sizeof(mask) * 8)
+
+#endif /* _MALIDP_UTILS_ */

drivers/gpu/drm/arm/display/komeda/Makefile

+# SPDX-License-Identifier: GPL-2.0
+
+ccflags-y := \
+	-I$(src)/../include \
+	-I$(src)
+
+komeda-y := \
+	komeda_drv.o \
+	komeda_dev.o \
+	komeda_format_caps.o \
+	komeda_pipeline.o \
+	komeda_framebuffer.o \
+	komeda_kms.o \
+	komeda_crtc.o \
+	komeda_plane.o \
+	komeda_private_obj.o
+
+komeda-y += \
+	d71/d71_dev.o
+
+obj-$(CONFIG_DRM_KOMEDA) += komeda.o

drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include "malidp_io.h"
+#include "komeda_dev.h"
+
+static int d71_enum_resources(struct komeda_dev *mdev)
+{
+	/* TODO add enum resources */
+	return -1;
+}
+
+#define __HW_ID(__group, __format) \
+	((((__group) & 0x7) << 3) | ((__format) & 0x7))
+
+#define RICH		KOMEDA_FMT_RICH_LAYER
+#define SIMPLE		KOMEDA_FMT_SIMPLE_LAYER
+#define RICH_SIMPLE	(KOMEDA_FMT_RICH_LAYER | KOMEDA_FMT_SIMPLE_LAYER)
+#define RICH_WB		(KOMEDA_FMT_RICH_LAYER | KOMEDA_FMT_WB_LAYER)
+#define RICH_SIMPLE_WB	(RICH_SIMPLE | KOMEDA_FMT_WB_LAYER)
+
+#define Rot_0		DRM_MODE_ROTATE_0
+#define Flip_H_V	(DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y | Rot_0)
+#define Rot_ALL_H_V	(DRM_MODE_ROTATE_MASK | Flip_H_V)
+
+#define LYT_NM		BIT(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16)
+#define LYT_WB		BIT(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8)
+#define LYT_NM_WB	(LYT_NM | LYT_WB)
+
+#define AFB_TH		AFBC(_TILED | _SPARSE)
+#define AFB_TH_SC_YTR	AFBC(_TILED | _SC | _SPARSE | _YTR)
+#define AFB_TH_SC_YTR_BS AFBC(_TILED | _SC | _SPARSE | _YTR | _SPLIT)
+
+static struct komeda_format_caps d71_format_caps_table[] = {
+	/*   HW_ID    |        fourcc        | tile_sz |   layer_types |   rots    | afbc_layouts | afbc_features */
+	/* ABGR_2101010*/
+	{__HW_ID(0, 0),	DRM_FORMAT_ARGB2101010,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(0, 1),	DRM_FORMAT_ABGR2101010,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(0, 1),	DRM_FORMAT_ABGR2101010,	1,	RICH_SIMPLE,	Rot_ALL_H_V,	LYT_NM_WB, AFB_TH_SC_YTR_BS}, /* afbc */
+	{__HW_ID(0, 2),	DRM_FORMAT_RGBA1010102,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(0, 3),	DRM_FORMAT_BGRA1010102,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	/* ABGR_8888*/
+	{__HW_ID(1, 0),	DRM_FORMAT_ARGB8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(1, 1),	DRM_FORMAT_ABGR8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(1, 1),	DRM_FORMAT_ABGR8888,	1,	RICH_SIMPLE,	Rot_ALL_H_V,	LYT_NM_WB, AFB_TH_SC_YTR_BS}, /* afbc */
+	{__HW_ID(1, 2),	DRM_FORMAT_RGBA8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(1, 3),	DRM_FORMAT_BGRA8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	/* XBGB_8888 */
+	{__HW_ID(2, 0),	DRM_FORMAT_XRGB8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(2, 1),	DRM_FORMAT_XBGR8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(2, 2),	DRM_FORMAT_RGBX8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	{__HW_ID(2, 3),	DRM_FORMAT_BGRX8888,	1,	RICH_SIMPLE_WB,	Flip_H_V,		0, 0},
+	/* BGR_888 */ /* none-afbc RGB888 doesn't support rotation and flip */
+	{__HW_ID(3, 0),	DRM_FORMAT_RGB888,	1,	RICH_SIMPLE_WB,	Rot_0,			0, 0},
+	{__HW_ID(3, 1),	DRM_FORMAT_BGR888,	1,	RICH_SIMPLE_WB,	Rot_0,			0, 0},
+	{__HW_ID(3, 1),	DRM_FORMAT_BGR888,	1,	RICH_SIMPLE,	Rot_ALL_H_V,	LYT_NM_WB, AFB_TH_SC_YTR_BS}, /* afbc */
+	/* BGR 16bpp */
+	{__HW_ID(4, 0),	DRM_FORMAT_RGBA5551,	1,	RICH_SIMPLE,	Flip_H_V,		0, 0},
+	{__HW_ID(4, 1),	DRM_FORMAT_ABGR1555,	1,	RICH_SIMPLE,	Flip_H_V,		0, 0},
+	{__HW_ID(4, 1),	DRM_FORMAT_ABGR1555,	1,	RICH_SIMPLE,	Rot_ALL_H_V,	LYT_NM_WB, AFB_TH_SC_YTR}, /* afbc */
+	{__HW_ID(4, 2),	DRM_FORMAT_RGB565,	1,	RICH_SIMPLE,	Flip_H_V,		0, 0},
+	{__HW_ID(4, 3),	DRM_FORMAT_BGR565,	1,	RICH_SIMPLE,	Flip_H_V,		0, 0},
+	{__HW_ID(4, 3),	DRM_FORMAT_BGR565,	1,	RICH_SIMPLE,	Rot_ALL_H_V,	LYT_NM_WB, AFB_TH_SC_YTR}, /* afbc */
+	{__HW_ID(4, 4), DRM_FORMAT_R8,		1,	SIMPLE,		Rot_0,			0, 0},
+	/* YUV 444/422/420 8bit  */
+	{__HW_ID(5, 0),	0 /*XYUV8888*/,		1,	0,		0,			0, 0},
+	/* XYUV unsupported*/
+	{__HW_ID(5, 1),	DRM_FORMAT_YUYV,	1,	RICH,		Rot_ALL_H_V,	LYT_NM, AFB_TH}, /* afbc */
+	{__HW_ID(5, 2),	DRM_FORMAT_YUYV,	1,	RICH,		Flip_H_V,		0, 0},
+	{__HW_ID(5, 3),	DRM_FORMAT_UYVY,	1,	RICH,		Flip_H_V,		0, 0},
+	{__HW_ID(5, 4),	0, /*X0L0 */		2,		0,			0, 0}, /* Y0L0 unsupported */
+	{__HW_ID(5, 6),	DRM_FORMAT_NV12,	1,	RICH,		Flip_H_V,		0, 0},
+	{__HW_ID(5, 6),	0/*DRM_FORMAT_YUV420_8BIT*/,	1,	RICH,	Rot_ALL_H_V,	LYT_NM, AFB_TH}, /* afbc */
+	{__HW_ID(5, 7),	DRM_FORMAT_YUV420,	1,	RICH,		Flip_H_V,		0, 0},
+	/* YUV 10bit*/
+	{__HW_ID(6, 0),	0,/*XVYU2101010*/	1,	0,		0,			0, 0},/* VYV30 unsupported */
+	{__HW_ID(6, 6),	0/*DRM_FORMAT_X0L2*/,	2,	RICH,		Flip_H_V,		0, 0},
+	{__HW_ID(6, 7),	0/*DRM_FORMAT_P010*/,	1,	RICH,		Flip_H_V,		0, 0},
+	{__HW_ID(6, 7),	0/*DRM_FORMAT_YUV420_10BIT*/, 1,	RICH,	Rot_ALL_H_V,	LYT_NM, AFB_TH},
+};
+
+static void d71_init_fmt_tbl(struct komeda_dev *mdev)
+{
+	struct komeda_format_caps_table *table = &mdev->fmt_tbl;
+
+	table->format_caps = d71_format_caps_table;
+	table->n_formats = ARRAY_SIZE(d71_format_caps_table);
+}
+
+static struct komeda_dev_funcs d71_chip_funcs = {
+	.init_format_table = d71_init_fmt_tbl,
+	.enum_resources	= d71_enum_resources,
+	.cleanup	= NULL,
+};
+
+#define GLB_ARCH_ID		0x000
+#define GLB_CORE_ID		0x004
+#define GLB_CORE_INFO		0x008
+
+struct komeda_dev_funcs *
+d71_identify(u32 __iomem *reg_base, struct komeda_chip_info *chip)
+{
+	chip->arch_id	= malidp_read32(reg_base, GLB_ARCH_ID);
+	chip->core_id	= malidp_read32(reg_base, GLB_CORE_ID);
+	chip->core_info	= malidp_read32(reg_base, GLB_CORE_INFO);
+
+	return &d71_chip_funcs;
+}

drivers/gpu/drm/arm/display/komeda/komeda_crtc.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <linux/pm_runtime.h>
+#include "komeda_dev.h"
+#include "komeda_kms.h"
+
+struct drm_crtc_helper_funcs komeda_crtc_helper_funcs = {
+};
+
+static const struct drm_crtc_funcs komeda_crtc_funcs = {
+};
+
+int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms,
+			   struct komeda_dev *mdev)
+{
+	struct komeda_crtc *crtc;
+	struct komeda_pipeline *master;
+	char str[16];
+	int i;
+
+	kms->n_crtcs = 0;
+
+	for (i = 0; i < mdev->n_pipelines; i++) {
+		crtc = &kms->crtcs[kms->n_crtcs];
+		master = mdev->pipelines[i];
+
+		crtc->master = master;
+		crtc->slave  = NULL;
+
+		if (crtc->slave)
+			sprintf(str, "pipe-%d", crtc->slave->id);
+		else
+			sprintf(str, "None");
+
+		DRM_INFO("crtc%d: master(pipe-%d) slave(%s) output: %s.\n",
+			 kms->n_crtcs, master->id, str,
+			 master->of_output_dev ?
+			 master->of_output_dev->full_name : "None");
+
+		kms->n_crtcs++;
+	}
+
+	return 0;
+}
+
+static struct drm_plane *
+get_crtc_primary(struct komeda_kms_dev *kms, struct komeda_crtc *crtc)
+{
+	struct komeda_plane *kplane;
+	struct drm_plane *plane;
+
+	drm_for_each_plane(plane, &kms->base) {
+		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+			continue;
+
+		kplane = to_kplane(plane);
+		/* only master can be primary */
+		if (kplane->layer->base.pipeline == crtc->master)
+			return plane;
+	}
+
+	return NULL;
+}
+
+static int komeda_crtc_add(struct komeda_kms_dev *kms,
+			   struct komeda_crtc *kcrtc)
+{
+	struct drm_crtc *crtc = &kcrtc->base;
+	int err;
+
+	err = drm_crtc_init_with_planes(&kms->base, crtc,
+					get_crtc_primary(kms, kcrtc), NULL,
+					&komeda_crtc_funcs, NULL);
+	if (err)
+		return err;
+
+	drm_crtc_helper_add(crtc, &komeda_crtc_helper_funcs);
+	drm_crtc_vblank_reset(crtc);
+
+	crtc->port = kcrtc->master->of_output_port;
+
+	return 0;
+}
+
+int komeda_kms_add_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev)
+{
+	int i, err;
+
+	for (i = 0; i < kms->n_crtcs; i++) {
+		err = komeda_crtc_add(kms, &kms->crtcs[i]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}

drivers/gpu/drm/arm/display/komeda/komeda_dev.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include "komeda_dev.h"
+
+static int komeda_parse_pipe_dt(struct komeda_dev *mdev, struct device_node *np)
+{
+	struct komeda_pipeline *pipe;
+	struct clk *clk;
+	u32 pipe_id;
+	int ret = 0;
+
+	ret = of_property_read_u32(np, "reg", &pipe_id);
+	if (ret != 0 || pipe_id >= mdev->n_pipelines)
+		return -EINVAL;
+
+	pipe = mdev->pipelines[pipe_id];
+
+	clk = of_clk_get_by_name(np, "aclk");
+	if (IS_ERR(clk)) {
+		DRM_ERROR("get aclk for pipeline %d failed!\n", pipe_id);
+		return PTR_ERR(clk);
+	}
+	pipe->aclk = clk;
+
+	clk = of_clk_get_by_name(np, "pxclk");
+	if (IS_ERR(clk)) {
+		DRM_ERROR("get pxclk for pipeline %d failed!\n", pipe_id);
+		return PTR_ERR(clk);
+	}
+	pipe->pxlclk = clk;
+
+	/* enum ports */
+	pipe->of_output_dev =
+		of_graph_get_remote_node(np, KOMEDA_OF_PORT_OUTPUT, 0);
+	pipe->of_output_port =
+		of_graph_get_port_by_id(np, KOMEDA_OF_PORT_OUTPUT);
+
+	pipe->of_node = np;
+
+	return 0;
+}
+
+static int komeda_parse_dt(struct device *dev, struct komeda_dev *mdev)
+{
+	struct device_node *child, *np = dev->of_node;
+	struct clk *clk;
+	int ret;
+
+	clk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	mdev->mclk = clk;
+
+	for_each_available_child_of_node(np, child) {
+		if (of_node_cmp(child->name, "pipeline") == 0) {
+			ret = komeda_parse_pipe_dt(mdev, child);
+			if (ret) {
+				DRM_ERROR("parse pipeline dt error!\n");
+				of_node_put(child);
+				break;
+			}
+		}
+	}
+
+	return ret;
+}
+
+struct komeda_dev *komeda_dev_create(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct komeda_product_data *product;
+	struct komeda_dev *mdev;
+	struct resource *io_res;
+	int err = 0;
+
+	product = of_device_get_match_data(dev);
+	if (!product)
+		return ERR_PTR(-ENODEV);
+
+	io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io_res) {
+		DRM_ERROR("No registers defined.\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	mdev = devm_kzalloc(dev, sizeof(*mdev), GFP_KERNEL);
+	if (!mdev)
+		return ERR_PTR(-ENOMEM);
+
+	mdev->dev = dev;
+	mdev->reg_base = devm_ioremap_resource(dev, io_res);
+	if (IS_ERR(mdev->reg_base)) {
+		DRM_ERROR("Map register space failed.\n");
+		err = PTR_ERR(mdev->reg_base);
+		mdev->reg_base = NULL;
+		goto err_cleanup;
+	}
+
+	mdev->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(mdev->pclk)) {
+		DRM_ERROR("Get APB clk failed.\n");
+		err = PTR_ERR(mdev->pclk);
+		mdev->pclk = NULL;
+		goto err_cleanup;
+	}
+
+	/* Enable APB clock to access the registers */
+	clk_prepare_enable(mdev->pclk);
+
+	mdev->funcs = product->identify(mdev->reg_base, &mdev->chip);
+	if (!komeda_product_match(mdev, product->product_id)) {
+		DRM_ERROR("DT configured %x mismatch with real HW %x.\n",
+			  product->product_id,
+			  MALIDP_CORE_ID_PRODUCT_ID(mdev->chip.core_id));
+		err = -ENODEV;
+		goto err_cleanup;
+	}
+
+	DRM_INFO("Found ARM Mali-D%x version r%dp%d\n",
+		 MALIDP_CORE_ID_PRODUCT_ID(mdev->chip.core_id),
+		 MALIDP_CORE_ID_MAJOR(mdev->chip.core_id),
+		 MALIDP_CORE_ID_MINOR(mdev->chip.core_id));
+
+	mdev->funcs->init_format_table(mdev);
+
+	err = mdev->funcs->enum_resources(mdev);
+	if (err) {
+		DRM_ERROR("enumerate display resource failed.\n");
+		goto err_cleanup;
+	}
+
+	err = komeda_parse_dt(dev, mdev);
+	if (err) {
+		DRM_ERROR("parse device tree failed.\n");
+		goto err_cleanup;
+	}
+
+	return mdev;
+
+err_cleanup:
+	komeda_dev_destroy(mdev);
+	return ERR_PTR(err);
+}
+
+void komeda_dev_destroy(struct komeda_dev *mdev)
+{
+	struct device *dev = mdev->dev;
+	struct komeda_dev_funcs *funcs = mdev->funcs;
+	int i;
+
+	for (i = 0; i < mdev->n_pipelines; i++) {
+		komeda_pipeline_destroy(mdev, mdev->pipelines[i]);
+		mdev->pipelines[i] = NULL;
+	}
+
+	mdev->n_pipelines = 0;
+
+	if (funcs && funcs->cleanup)
+		funcs->cleanup(mdev);
+
+	if (mdev->reg_base) {
+		devm_iounmap(dev, mdev->reg_base);
+		mdev->reg_base = NULL;
+	}
+
+	if (mdev->mclk) {
+		devm_clk_put(dev, mdev->mclk);
+		mdev->mclk = NULL;
+	}
+
+	if (mdev->pclk) {
+		clk_disable_unprepare(mdev->pclk);
+		devm_clk_put(dev, mdev->pclk);
+		mdev->pclk = NULL;
+	}
+
+	devm_kfree(dev, mdev);
+}

drivers/gpu/drm/arm/display/komeda/komeda_dev.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _KOMEDA_DEV_H_
+#define _KOMEDA_DEV_H_
+
+#include <linux/device.h>
+#include <linux/clk.h>
+#include "komeda_pipeline.h"
+#include "malidp_product.h"
+#include "komeda_format_caps.h"
+
+/* malidp device id */
+enum {
+	MALI_D71 = 0,
+};
+
+/* pipeline DT ports */
+enum {
+	KOMEDA_OF_PORT_OUTPUT		= 0,
+	KOMEDA_OF_PORT_COPROC		= 1,
+};
+
+struct komeda_chip_info {
+	u32 arch_id;
+	u32 core_id;
+	u32 core_info;
+	u32 bus_width;
+};
+
+struct komeda_product_data {
+	u32 product_id;
+	struct komeda_dev_funcs *(*identify)(u32 __iomem *reg,
+					     struct komeda_chip_info *info);
+};
+
+struct komeda_dev;
+
+/**
+ * struct komeda_dev_funcs
+ *
+ * Supplied by chip level and returned by the chip entry function xxx_identify,
+ */
+struct komeda_dev_funcs {
+	/**
+	 * @init_format_table:
+	 *
+	 * initialize &komeda_dev->format_table, this function should be called
+	 * before the &enum_resource
+	 */
+	void (*init_format_table)(struct komeda_dev *mdev);
+	/**
+	 * @enum_resources:
+	 *
+	 * for CHIP to report or add pipeline and component resources to CORE
+	 */
+	int (*enum_resources)(struct komeda_dev *mdev);
+	/** @cleanup: call to chip to cleanup komeda_dev->chip data */
+	void (*cleanup)(struct komeda_dev *mdev);
+};
+
+/**
+ * struct komeda_dev
+ *
+ * Pipeline and component are used to describe how to handle the pixel data.
+ * komeda_device is for describing the whole view of the device, and the
+ * control-abilites of device.
+ */
+struct komeda_dev {
+	struct device *dev;
+	u32 __iomem   *reg_base;
+
+	struct komeda_chip_info chip;
+	/** @fmt_tbl: initialized by &komeda_dev_funcs->init_format_table */
+	struct komeda_format_caps_table fmt_tbl;
+	/** @pclk: APB clock for register access */
+	struct clk *pclk;
+	/** @mck: HW main engine clk */
+	struct clk *mclk;
+
+	int n_pipelines;
+	struct komeda_pipeline *pipelines[KOMEDA_MAX_PIPELINES];
+
+	/** @funcs: chip funcs to access to HW */
+	struct komeda_dev_funcs *funcs;
+	/**
+	 * @chip_data:
+	 *
+	 * chip data will be added by &komeda_dev_funcs.enum_resources() and
+	 * destroyed by &komeda_dev_funcs.cleanup()
+	 */
+	void *chip_data;
+};
+
+static inline bool
+komeda_product_match(struct komeda_dev *mdev, u32 target)
+{
+	return MALIDP_CORE_ID_PRODUCT_ID(mdev->chip.core_id) == target;
+}
+
+struct komeda_dev_funcs *
+d71_identify(u32 __iomem *reg, struct komeda_chip_info *chip);
+
+struct komeda_dev *komeda_dev_create(struct device *dev);
+void komeda_dev_destroy(struct komeda_dev *mdev);
+
+#endif /*_KOMEDA_DEV_H_*/

drivers/gpu/drm/arm/display/komeda/komeda_drv.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/component.h>
+#include <drm/drm_of.h>
+#include "komeda_dev.h"
+#include "komeda_kms.h"
+
+struct komeda_drv {
+	struct komeda_dev *mdev;
+	struct komeda_kms_dev *kms;
+};
+
+static void komeda_unbind(struct device *dev)
+{
+	struct komeda_drv *mdrv = dev_get_drvdata(dev);
+
+	if (!mdrv)
+		return;
+
+	komeda_kms_detach(mdrv->kms);
+	komeda_dev_destroy(mdrv->mdev);
+
+	dev_set_drvdata(dev, NULL);
+	devm_kfree(dev, mdrv);
+}
+
+static int komeda_bind(struct device *dev)
+{
+	struct komeda_drv *mdrv;
+	int err;
+
+	mdrv = devm_kzalloc(dev, sizeof(*mdrv), GFP_KERNEL);
+	if (!mdrv)
+		return -ENOMEM;
+
+	mdrv->mdev = komeda_dev_create(dev);
+	if (IS_ERR(mdrv->mdev)) {
+		err = PTR_ERR(mdrv->mdev);
+		goto free_mdrv;
+	}
+
+	mdrv->kms = komeda_kms_attach(mdrv->mdev);
+	if (IS_ERR(mdrv->kms)) {
+		err = PTR_ERR(mdrv->kms);
+		goto destroy_mdev;
+	}
+
+	dev_set_drvdata(dev, mdrv);
+
+	return 0;
+
+destroy_mdev:
+	komeda_dev_destroy(mdrv->mdev);
+
+free_mdrv:
+	devm_kfree(dev, mdrv);
+	return err;
+}
+
+static const struct component_master_ops komeda_master_ops = {
+	.bind	= komeda_bind,
+	.unbind	= komeda_unbind,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+static void komeda_add_slave(struct device *master,
+			     struct component_match **match,
+			     struct device_node *np, int port)
+{
+	struct device_node *remote;
+
+	remote = of_graph_get_remote_node(np, port, 0);
+	if (remote) {
+		drm_of_component_match_add(master, match, compare_of, remote);
+		of_node_put(remote);
+	}
+}
+
+static int komeda_platform_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct component_match *match = NULL;
+	struct device_node *child;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	for_each_available_child_of_node(dev->of_node, child) {
+		if (of_node_cmp(child->name, "pipeline") != 0)
+			continue;
+
+		/* add connector */
+		komeda_add_slave(dev, &match, child, KOMEDA_OF_PORT_OUTPUT);
+	}
+
+	return component_master_add_with_match(dev, &komeda_master_ops, match);
+}
+
+static int komeda_platform_remove(struct platform_device *pdev)
+{
+	component_master_del(&pdev->dev, &komeda_master_ops);
+	return 0;
+}
+
+static const struct komeda_product_data komeda_products[] = {
+	[MALI_D71] = {
+		.product_id = MALIDP_D71_PRODUCT_ID,
+		.identify = d71_identify,
+	},
+};
+
+const struct of_device_id komeda_of_match[] = {
+	{ .compatible = "arm,mali-d71", .data = &komeda_products[MALI_D71], },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, komeda_of_match);
+
+static struct platform_driver komeda_platform_driver = {
+	.probe	= komeda_platform_probe,
+	.remove	= komeda_platform_remove,
+	.driver	= {
+		.name = "komeda",
+		.of_match_table	= komeda_of_match,
+		.pm = NULL,
+	},
+};
+
+module_platform_driver(komeda_platform_driver);
+
+MODULE_AUTHOR("James.Qian.Wang <james.qian.wang@arm.com>");
+MODULE_DESCRIPTION("Komeda KMS driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/arm/display/komeda/komeda_format_caps.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+
+#include <linux/slab.h>
+#include "komeda_format_caps.h"
+#include "malidp_utils.h"
+
+const struct komeda_format_caps *
+komeda_get_format_caps(struct komeda_format_caps_table *table,
+		       u32 fourcc, u64 modifier)
+{
+	const struct komeda_format_caps *caps;
+	u64 afbc_features = modifier & ~(AFBC_FORMAT_MOD_BLOCK_SIZE_MASK);
+	u32 afbc_layout = modifier & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK;
+	int id;
+
+	for (id = 0; id < table->n_formats; id++) {
+		caps = &table->format_caps[id];
+
+		if (fourcc != caps->fourcc)
+			continue;
+
+		if ((modifier == 0ULL) && (caps->supported_afbc_layouts == 0))
+			return caps;
+
+		if (has_bits(afbc_features, caps->supported_afbc_features) &&
+		    has_bit(afbc_layout, caps->supported_afbc_layouts))
+			return caps;
+	}
+
+	return NULL;
+}
+
+u32 *komeda_get_layer_fourcc_list(struct komeda_format_caps_table *table,
+				  u32 layer_type, u32 *n_fmts)
+{
+	const struct komeda_format_caps *cap;
+	u32 *fmts;
+	int i, j, n = 0;
+
+	fmts = kcalloc(table->n_formats, sizeof(u32), GFP_KERNEL);
+	if (!fmts)
+		return NULL;
+
+	for (i = 0; i < table->n_formats; i++) {
+		cap = &table->format_caps[i];
+		if (!(layer_type & cap->supported_layer_types) ||
+		    (cap->fourcc == 0))
+			continue;
+
+		/* one fourcc may has two caps items in table (afbc/none-afbc),
+		 * so check the existing list to avoid adding a duplicated one.
+		 */
+		for (j = n - 1; j >= 0; j--)
+			if (fmts[j] == cap->fourcc)
+				break;
+
+		if (j < 0)
+			fmts[n++] = cap->fourcc;
+	}
+
+	if (n_fmts)
+		*n_fmts = n;
+
+	return fmts;
+}
+
+void komeda_put_fourcc_list(u32 *fourcc_list)
+{
+	kfree(fourcc_list);
+}

drivers/gpu/drm/arm/display/komeda/komeda_format_caps.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+
+#ifndef _KOMEDA_FORMAT_CAPS_H_
+#define _KOMEDA_FORMAT_CAPS_H_
+
+#include <linux/types.h>
+#include <uapi/drm/drm_fourcc.h>
+#include <drm/drm_fourcc.h>
+
+#define AFBC(x)		DRM_FORMAT_MOD_ARM_AFBC(x)
+
+/* afbc layerout */
+#define AFBC_16x16(x)	AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 | (x))
+#define AFBC_32x8(x)	AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 | (x))
+
+/* afbc features */
+#define _YTR		AFBC_FORMAT_MOD_YTR
+#define _SPLIT		AFBC_FORMAT_MOD_SPLIT
+#define _SPARSE		AFBC_FORMAT_MOD_SPARSE
+#define _CBR		AFBC_FORMAT_MOD_CBR
+#define _TILED		AFBC_FORMAT_MOD_TILED
+#define _SC		AFBC_FORMAT_MOD_SC
+
+/* layer_type */
+#define KOMEDA_FMT_RICH_LAYER		BIT(0)
+#define KOMEDA_FMT_SIMPLE_LAYER		BIT(1)
+#define KOMEDA_FMT_WB_LAYER		BIT(2)
+
+#define AFBC_TH_LAYOUT_ALIGNMENT	8
+#define AFBC_HEADER_SIZE		16
+#define AFBC_SUPERBLK_ALIGNMENT		128
+#define AFBC_SUPERBLK_PIXELS		256
+#define AFBC_BODY_START_ALIGNMENT	1024
+#define AFBC_TH_BODY_START_ALIGNMENT	4096
+
+/**
+ * struct komeda_format_caps
+ *
+ * komeda_format_caps is for describing ARM display specific features and
+ * limitations for a specific format, and format_caps will be linked into
+ * &komeda_framebuffer like a extension of &drm_format_info.
+ *
+ * NOTE: one fourcc may has two different format_caps items for fourcc and
+ * fourcc+modifier
+ *
+ * @hw_id: hw format id, hw specific value.
+ * @fourcc: drm fourcc format.
+ * @tile_size: format tiled size, used by ARM format X0L0/X0L2
+ * @supported_layer_types: indicate which layer supports this format
+ * @supported_rots: allowed rotations for this format
+ * @supported_afbc_layouts: supported afbc layerout
+ * @supported_afbc_features: supported afbc features
+ */
+struct komeda_format_caps {
+	u32 hw_id;
+	u32 fourcc;
+	u32 tile_size;
+	u32 supported_layer_types;
+	u32 supported_rots;
+	u32 supported_afbc_layouts;
+	u64 supported_afbc_features;
+};
+
+/**
+ * struct komeda_format_caps_table - format_caps mananger
+ *
+ * @n_formats: the size of format_caps list.
+ * @format_caps: format_caps list.
+ */
+struct komeda_format_caps_table {
+	u32 n_formats;
+	const struct komeda_format_caps *format_caps;
+};
+
+const struct komeda_format_caps *
+komeda_get_format_caps(struct komeda_format_caps_table *table,
+		       u32 fourcc, u64 modifier);
+
+u32 *komeda_get_layer_fourcc_list(struct komeda_format_caps_table *table,
+				  u32 layer_type, u32 *n_fmts);
+
+void komeda_put_fourcc_list(u32 *fourcc_list);
+
+#endif

drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <drm/drm_gem.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include "komeda_framebuffer.h"
+#include "komeda_dev.h"
+
+static void komeda_fb_destroy(struct drm_framebuffer *fb)
+{
+	struct komeda_fb *kfb = to_kfb(fb);
+	u32 i;
+
+	for (i = 0; i < fb->format->num_planes; i++)
+		drm_gem_object_put_unlocked(fb->obj[i]);
+
+	drm_framebuffer_cleanup(fb);
+	kfree(kfb);
+}
+
+static int komeda_fb_create_handle(struct drm_framebuffer *fb,
+				   struct drm_file *file, u32 *handle)
+{
+	return drm_gem_handle_create(file, fb->obj[0], handle);
+}
+
+static const struct drm_framebuffer_funcs komeda_fb_funcs = {
+	.destroy	= komeda_fb_destroy,
+	.create_handle	= komeda_fb_create_handle,
+};
+
+static int
+komeda_fb_none_afbc_size_check(struct komeda_dev *mdev, struct komeda_fb *kfb,
+			       struct drm_file *file,
+			       const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	struct drm_framebuffer *fb = &kfb->base;
+	struct drm_gem_object *obj;
+	u32 min_size = 0;
+	u32 i;
+
+	for (i = 0; i < fb->format->num_planes; i++) {
+		obj = drm_gem_object_lookup(file, mode_cmd->handles[i]);
+		if (!obj) {
+			DRM_DEBUG_KMS("Failed to lookup GEM object\n");
+			fb->obj[i] = NULL;
+
+			return -ENOENT;
+		}
+
+		kfb->aligned_w = fb->width / (i ? fb->format->hsub : 1);
+		kfb->aligned_h = fb->height / (i ? fb->format->vsub : 1);
+
+		if (fb->pitches[i] % mdev->chip.bus_width) {
+			DRM_DEBUG_KMS("Pitch[%d]: 0x%x doesn't align to 0x%x\n",
+				      i, fb->pitches[i], mdev->chip.bus_width);
+			drm_gem_object_put_unlocked(obj);
+			fb->obj[i] = NULL;
+
+			return -EINVAL;
+		}
+
+		min_size = ((kfb->aligned_h / kfb->format_caps->tile_size - 1)
+			    * fb->pitches[i])
+			    + (kfb->aligned_w * fb->format->cpp[i]
+			       * kfb->format_caps->tile_size)
+			    + fb->offsets[i];
+
+		if (obj->size < min_size) {
+			DRM_DEBUG_KMS("Fail to check none afbc fb size.\n");
+			drm_gem_object_put_unlocked(obj);
+			fb->obj[i] = NULL;
+
+			return -EINVAL;
+		}
+
+		fb->obj[i] = obj;
+	}
+
+	if (fb->format->num_planes == 3) {
+		if (fb->pitches[1] != fb->pitches[2]) {
+			DRM_DEBUG_KMS("The pitch[1] and [2] are not same\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+struct drm_framebuffer *
+komeda_fb_create(struct drm_device *dev, struct drm_file *file,
+		 const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	struct komeda_dev *mdev = dev->dev_private;
+	struct komeda_fb *kfb;
+	int ret = 0, i;
+
+	kfb = kzalloc(sizeof(*kfb), GFP_KERNEL);
+	if (!kfb)
+		return ERR_PTR(-ENOMEM);
+
+	kfb->format_caps = komeda_get_format_caps(&mdev->fmt_tbl,
+						  mode_cmd->pixel_format,
+						  mode_cmd->modifier[0]);
+	if (!kfb->format_caps) {
+		DRM_DEBUG_KMS("FMT %x is not supported.\n",
+			      mode_cmd->pixel_format);
+		kfree(kfb);
+		return ERR_PTR(-EINVAL);
+	}
+
+	drm_helper_mode_fill_fb_struct(dev, &kfb->base, mode_cmd);
+
+	ret = komeda_fb_none_afbc_size_check(mdev, kfb, file, mode_cmd);
+	if (ret < 0)
+		goto err_cleanup;
+
+	ret = drm_framebuffer_init(dev, &kfb->base, &komeda_fb_funcs);
+	if (ret < 0) {
+		DRM_DEBUG_KMS("failed to initialize fb\n");
+
+		goto err_cleanup;
+	}
+
+	return &kfb->base;
+
+err_cleanup:
+	for (i = 0; i < kfb->base.format->num_planes; i++)
+		drm_gem_object_put_unlocked(kfb->base.obj[i]);
+
+	kfree(kfb);
+	return ERR_PTR(ret);
+}
+
+dma_addr_t
+komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int y, int plane)
+{
+	struct drm_framebuffer *fb = &kfb->base;
+	const struct drm_gem_cma_object *obj;
+	u32 plane_x, plane_y, cpp, pitch, offset;
+
+	if (plane >= fb->format->num_planes) {
+		DRM_DEBUG_KMS("Out of max plane num.\n");
+		return -EINVAL;
+	}
+
+	obj = drm_fb_cma_get_gem_obj(fb, plane);
+
+	offset = fb->offsets[plane];
+	if (!fb->modifier) {
+		plane_x = x / (plane ? fb->format->hsub : 1);
+		plane_y = y / (plane ? fb->format->vsub : 1);
+		cpp = fb->format->cpp[plane];
+		pitch = fb->pitches[plane];
+		offset += plane_x * cpp *  kfb->format_caps->tile_size +
+				(plane_y * pitch) / kfb->format_caps->tile_size;
+	}
+
+	return obj->paddr + offset;
+}

drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _KOMEDA_FRAMEBUFFER_H_
+#define _KOMEDA_FRAMEBUFFER_H_
+
+#include <drm/drm_framebuffer.h>
+#include "komeda_format_caps.h"
+
+/** struct komeda_fb - entend drm_framebuffer with komeda attribute */
+struct komeda_fb {
+	/** @base: &drm_framebuffer */
+	struct drm_framebuffer base;
+	/* @format_caps: &komeda_format_caps */
+	const struct komeda_format_caps *format_caps;
+	/** @aligned_w: aligned frame buffer width */
+	u32 aligned_w;
+	/** @aligned_h: aligned frame buffer height */
+	u32 aligned_h;
+};
+
+#define to_kfb(dfb)	container_of(dfb, struct komeda_fb, base)
+
+struct drm_framebuffer *
+komeda_fb_create(struct drm_device *dev, struct drm_file *file,
+		 const struct drm_mode_fb_cmd2 *mode_cmd);
+dma_addr_t
+komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int y, int plane);
+bool komeda_fb_is_layer_supported(struct komeda_fb *kfb, u32 layer_type);
+
+#endif

drivers/gpu/drm/arm/display/komeda/komeda_kms.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <linux/component.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <linux/interrupt.h>
+#include "komeda_dev.h"
+#include "komeda_kms.h"
+#include "komeda_framebuffer.h"
+
+DEFINE_DRM_GEM_CMA_FOPS(komeda_cma_fops);
+
+static int komeda_gem_cma_dumb_create(struct drm_file *file,
+				      struct drm_device *dev,
+				      struct drm_mode_create_dumb *args)
+{
+	u32 alignment = 16; /* TODO get alignment from dev */
+
+	args->pitch = ALIGN(DIV_ROUND_UP(args->width * args->bpp, 8),
+			    alignment);
+
+	return drm_gem_cma_dumb_create_internal(file, dev, args);
+}
+
+static struct drm_driver komeda_kms_driver = {
+	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC |
+			   DRIVER_PRIME,
+	.lastclose			= drm_fb_helper_lastclose,
+	.gem_free_object_unlocked	= drm_gem_cma_free_object,
+	.gem_vm_ops			= &drm_gem_cma_vm_ops,
+	.dumb_create			= komeda_gem_cma_dumb_create,
+	.prime_handle_to_fd		= drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle		= drm_gem_prime_fd_to_handle,
+	.gem_prime_export		= drm_gem_prime_export,
+	.gem_prime_import		= drm_gem_prime_import,
+	.gem_prime_get_sg_table		= drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table	= drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap			= drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap		= drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap			= drm_gem_cma_prime_mmap,
+	.fops = &komeda_cma_fops,
+	.name = "komeda",
+	.desc = "Arm Komeda Display Processor driver",
+	.date = "20181101",
+	.major = 0,
+	.minor = 1,
+};
+
+static void komeda_kms_commit_tail(struct drm_atomic_state *old_state)
+{
+	struct drm_device *dev = old_state->dev;
+
+	drm_atomic_helper_commit_modeset_disables(dev, old_state);
+
+	drm_atomic_helper_commit_planes(dev, old_state, 0);
+
+	drm_atomic_helper_commit_modeset_enables(dev, old_state);
+
+	drm_atomic_helper_wait_for_flip_done(dev, old_state);
+
+	drm_atomic_helper_commit_hw_done(old_state);
+
+	drm_atomic_helper_cleanup_planes(dev, old_state);
+}
+
+static const struct drm_mode_config_helper_funcs komeda_mode_config_helpers = {
+	.atomic_commit_tail = komeda_kms_commit_tail,
+};
+
+static const struct drm_mode_config_funcs komeda_mode_config_funcs = {
+	.fb_create		= komeda_fb_create,
+	.atomic_check		= drm_atomic_helper_check,
+	.atomic_commit		= drm_atomic_helper_commit,
+};
+
+static void komeda_kms_mode_config_init(struct komeda_kms_dev *kms,
+					struct komeda_dev *mdev)
+{
+	struct drm_mode_config *config = &kms->base.mode_config;
+
+	drm_mode_config_init(&kms->base);
+
+	komeda_kms_setup_crtcs(kms, mdev);
+
+	/* Get value from dev */
+	config->min_width	= 0;
+	config->min_height	= 0;
+	config->max_width	= 4096;
+	config->max_height	= 4096;
+	config->allow_fb_modifiers = false;
+
+	config->funcs = &komeda_mode_config_funcs;
+	config->helper_private = &komeda_mode_config_helpers;
+}
+
+struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev)
+{
+	struct komeda_kms_dev *kms = kzalloc(sizeof(*kms), GFP_KERNEL);
+	struct drm_device *drm;
+	int err;
+
+	if (!kms)
+		return ERR_PTR(-ENOMEM);
+
+	drm = &kms->base;
+	err = drm_dev_init(drm, &komeda_kms_driver, mdev->dev);
+	if (err)
+		goto free_kms;
+
+	drm->dev_private = mdev;
+
+	komeda_kms_mode_config_init(kms, mdev);
+
+	err = komeda_kms_add_private_objs(kms, mdev);
+	if (err)
+		goto cleanup_mode_config;
+
+	err = komeda_kms_add_planes(kms, mdev);
+	if (err)
+		goto cleanup_mode_config;
+
+	err = drm_vblank_init(drm, kms->n_crtcs);
+	if (err)
+		goto cleanup_mode_config;
+
+	err = komeda_kms_add_crtcs(kms, mdev);
+	if (err)
+		goto cleanup_mode_config;
+
+	err = component_bind_all(mdev->dev, kms);
+	if (err)
+		goto cleanup_mode_config;
+
+	drm_mode_config_reset(drm);
+
+	err = drm_dev_register(drm, 0);
+	if (err)
+		goto cleanup_mode_config;
+
+	return kms;
+
+cleanup_mode_config:
+	drm_mode_config_cleanup(drm);
+free_kms:
+	kfree(kms);
+	return ERR_PTR(err);
+}
+
+void komeda_kms_detach(struct komeda_kms_dev *kms)
+{
+	struct drm_device *drm = &kms->base;
+	struct komeda_dev *mdev = drm->dev_private;
+
+	drm_dev_unregister(drm);
+	component_unbind_all(mdev->dev, drm);
+	komeda_kms_cleanup_private_objs(mdev);
+	drm_mode_config_cleanup(drm);
+	drm->dev_private = NULL;
+	drm_dev_put(drm);
+}

drivers/gpu/drm/arm/display/komeda/komeda_kms.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#ifndef _KOMEDA_KMS_H_
+#define _KOMEDA_KMS_H_
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_writeback.h>
+
+/** struct komeda_plane - komeda instance of drm_plane */
+struct komeda_plane {
+	/** @base: &drm_plane */
+	struct drm_plane base;
+	/**
+	 * @layer:
+	 *
+	 * represents available layer input pipelines for this plane.
+	 *
+	 * NOTE:
+	 * the layer is not for a specific Layer, but indicate a group of
+	 * Layers with same capabilities.
+	 */
+	struct komeda_layer *layer;
+};
+
+/**
+ * struct komeda_plane_state
+ *
+ * The plane_state can be split into two data flow (left/right) and handled
+ * by two layers &komeda_plane.layer and &komeda_plane.layer.right
+ */
+struct komeda_plane_state {
+	/** @base: &drm_plane_state */
+	struct drm_plane_state base;
+
+	/* private properties */
+};
+
+/**
+ * struct komeda_wb_connector
+ */
+struct komeda_wb_connector {
+	/** @base: &drm_writeback_connector */
+	struct drm_writeback_connector base;
+
+	/** @wb_layer: represents associated writeback pipeline of komeda */
+	struct komeda_layer *wb_layer;
+};
+
+/**
+ * struct komeda_crtc
+ */
+struct komeda_crtc {
+	/** @base: &drm_crtc */
+	struct drm_crtc base;
+	/** @master: only master has display output */
+	struct komeda_pipeline *master;
+	/**
+	 * @slave: optional
+	 *
+	 * Doesn't have its own display output, the handled data flow will
+	 * merge into the master.
+	 */
+	struct komeda_pipeline *slave;
+};
+
+/** struct komeda_crtc_state */
+struct komeda_crtc_state {
+	/** @base: &drm_crtc_state */
+	struct drm_crtc_state base;
+
+	/* private properties */
+
+	/* computed state which are used by validate/check */
+	u32 affected_pipes;
+	u32 active_pipes;
+};
+
+/** struct komeda_kms_dev - for gather KMS related things */
+struct komeda_kms_dev {
+	/** @base: &drm_device */
+	struct drm_device base;
+
+	/** @n_crtcs: valid numbers of crtcs in &komeda_kms_dev.crtcs */
+	int n_crtcs;
+	/** @crtcs: crtcs list */
+	struct komeda_crtc crtcs[KOMEDA_MAX_PIPELINES];
+};
+
+#define to_kplane(p)	container_of(p, struct komeda_plane, base)
+#define to_kplane_st(p)	container_of(p, struct komeda_plane_state, base)
+#define to_kconn(p)	container_of(p, struct komeda_wb_connector, base)
+#define to_kcrtc(p)	container_of(p, struct komeda_crtc, base)
+#define to_kcrtc_st(p)	container_of(p, struct komeda_crtc_state, base)
+#define to_kdev(p)	container_of(p, struct komeda_kms_dev, base)
+
+int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
+
+int komeda_kms_add_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
+int komeda_kms_add_planes(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
+int komeda_kms_add_private_objs(struct komeda_kms_dev *kms,
+				struct komeda_dev *mdev);
+void komeda_kms_cleanup_private_objs(struct komeda_dev *mdev);
+
+struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev);
+void komeda_kms_detach(struct komeda_kms_dev *kms);
+
+#endif /*_KOMEDA_KMS_H_*/

drivers/gpu/drm/arm/display/komeda/komeda_pipeline.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include "komeda_dev.h"
+#include "komeda_pipeline.h"
+
+/** komeda_pipeline_add - Add a pipeline to &komeda_dev */
+struct komeda_pipeline *
+komeda_pipeline_add(struct komeda_dev *mdev, size_t size,
+		    struct komeda_pipeline_funcs *funcs)
+{
+	struct komeda_pipeline *pipe;
+
+	if (mdev->n_pipelines + 1 > KOMEDA_MAX_PIPELINES) {
+		DRM_ERROR("Exceed max support %d pipelines.\n",
+			  KOMEDA_MAX_PIPELINES);
+		return NULL;
+	}
+
+	if (size < sizeof(*pipe)) {
+		DRM_ERROR("Request pipeline size too small.\n");
+		return NULL;
+	}
+
+	pipe = devm_kzalloc(mdev->dev, size, GFP_KERNEL);
+	if (!pipe)
+		return NULL;
+
+	pipe->mdev = mdev;
+	pipe->id   = mdev->n_pipelines;
+	pipe->funcs = funcs;
+
+	mdev->pipelines[mdev->n_pipelines] = pipe;
+	mdev->n_pipelines++;
+
+	return pipe;
+}
+
+void komeda_pipeline_destroy(struct komeda_dev *mdev,
+			     struct komeda_pipeline *pipe)
+{
+	struct komeda_component *c;
+	int i;
+
+	dp_for_each_set_bit(i, pipe->avail_comps) {
+		c = komeda_pipeline_get_component(pipe, i);
+		komeda_component_destroy(mdev, c);
+	}
+
+	clk_put(pipe->pxlclk);
+	clk_put(pipe->aclk);
+
+	of_node_put(pipe->of_output_dev);
+	of_node_put(pipe->of_output_port);
+	of_node_put(pipe->of_node);
+
+	devm_kfree(mdev->dev, pipe);
+}
+
+struct komeda_component **
+komeda_pipeline_get_component_pos(struct komeda_pipeline *pipe, int id)
+{
+	struct komeda_dev *mdev = pipe->mdev;
+	struct komeda_pipeline *temp = NULL;
+	struct komeda_component **pos = NULL;
+
+	switch (id) {
+	case KOMEDA_COMPONENT_LAYER0:
+	case KOMEDA_COMPONENT_LAYER1:
+	case KOMEDA_COMPONENT_LAYER2:
+	case KOMEDA_COMPONENT_LAYER3:
+		pos = to_cpos(pipe->layers[id - KOMEDA_COMPONENT_LAYER0]);
+		break;
+	case KOMEDA_COMPONENT_WB_LAYER:
+		pos = to_cpos(pipe->wb_layer);
+		break;
+	case KOMEDA_COMPONENT_COMPIZ0:
+	case KOMEDA_COMPONENT_COMPIZ1:
+		temp = mdev->pipelines[id - KOMEDA_COMPONENT_COMPIZ0];
+		if (!temp) {
+			DRM_ERROR("compiz-%d doesn't exist.\n", id);
+			return NULL;
+		}
+		pos = to_cpos(temp->compiz);
+		break;
+	case KOMEDA_COMPONENT_SCALER0:
+	case KOMEDA_COMPONENT_SCALER1:
+		pos = to_cpos(pipe->scalers[id - KOMEDA_COMPONENT_SCALER0]);
+		break;
+	case KOMEDA_COMPONENT_IPS0:
+	case KOMEDA_COMPONENT_IPS1:
+		temp = mdev->pipelines[id - KOMEDA_COMPONENT_IPS0];
+		if (!temp) {
+			DRM_ERROR("ips-%d doesn't exist.\n", id);
+			return NULL;
+		}
+		pos = to_cpos(temp->improc);
+		break;
+	case KOMEDA_COMPONENT_TIMING_CTRLR:
+		pos = to_cpos(pipe->ctrlr);
+		break;
+	default:
+		pos = NULL;
+		DRM_ERROR("Unknown pipeline resource ID: %d.\n", id);
+		break;
+	}
+
+	return pos;
+}
+
+struct komeda_component *
+komeda_pipeline_get_component(struct komeda_pipeline *pipe, int id)
+{
+	struct komeda_component **pos = NULL;
+	struct komeda_component *c = NULL;
+
+	pos = komeda_pipeline_get_component_pos(pipe, id);
+	if (pos)
+		c = *pos;
+
+	return c;
+}
+
+/** komeda_component_add - Add a component to &komeda_pipeline */
+struct komeda_component *
+komeda_component_add(struct komeda_pipeline *pipe,
+		     size_t comp_sz, u32 id, u32 hw_id,
+		     struct komeda_component_funcs *funcs,
+		     u8 max_active_inputs, u32 supported_inputs,
+		     u8 max_active_outputs, u32 __iomem *reg,
+		     const char *name_fmt, ...)
+{
+	struct komeda_component **pos;
+	struct komeda_component *c;
+	int idx, *num = NULL;
+
+	if (max_active_inputs > KOMEDA_COMPONENT_N_INPUTS) {
+		WARN(1, "please large KOMEDA_COMPONENT_N_INPUTS to %d.\n",
+		     max_active_inputs);
+		return NULL;
+	}
+
+	pos = komeda_pipeline_get_component_pos(pipe, id);
+	if (!pos || (*pos))
+		return NULL;
+
+	if (has_bit(id, KOMEDA_PIPELINE_LAYERS)) {
+		idx = id - KOMEDA_COMPONENT_LAYER0;
+		num = &pipe->n_layers;
+		if (idx != pipe->n_layers) {
+			DRM_ERROR("please add Layer by id sequence.\n");
+			return NULL;
+		}
+	} else if (has_bit(id,  KOMEDA_PIPELINE_SCALERS)) {
+		idx = id - KOMEDA_COMPONENT_SCALER0;
+		num = &pipe->n_scalers;
+		if (idx != pipe->n_scalers) {
+			DRM_ERROR("please add Scaler by id sequence.\n");
+			return NULL;
+		}
+	}
+
+	c = devm_kzalloc(pipe->mdev->dev, comp_sz, GFP_KERNEL);
+	if (!c)
+		return NULL;
+
+	c->id = id;
+	c->hw_id = hw_id;
+	c->reg = reg;
+	c->pipeline = pipe;
+	c->max_active_inputs = max_active_inputs;
+	c->max_active_outputs = max_active_outputs;
+	c->supported_inputs = supported_inputs;
+	c->funcs = funcs;
+
+	if (name_fmt) {
+		va_list args;
+
+		va_start(args, name_fmt);
+		vsnprintf(c->name, sizeof(c->name), name_fmt, args);
+		va_end(args);
+	}
+
+	if (num)
+		*num = *num + 1;
+
+	pipe->avail_comps |= BIT(c->id);
+	*pos = c;
+
+	return c;
+}
+
+void komeda_component_destroy(struct komeda_dev *mdev,
+			      struct komeda_component *c)
+{
+	devm_kfree(mdev->dev, c);
+}

drivers/gpu/drm/arm/display/komeda/komeda_plane.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include "komeda_dev.h"
+#include "komeda_kms.h"
+
+static const struct drm_plane_helper_funcs komeda_plane_helper_funcs = {
+};
+
+static void komeda_plane_destroy(struct drm_plane *plane)
+{
+	drm_plane_cleanup(plane);
+
+	kfree(to_kplane(plane));
+}
+
+static const struct drm_plane_funcs komeda_plane_funcs = {
+};
+
+/* for komeda, which is pipeline can be share between crtcs */
+static u32 get_possible_crtcs(struct komeda_kms_dev *kms,
+			      struct komeda_pipeline *pipe)
+{
+	struct komeda_crtc *crtc;
+	u32 possible_crtcs = 0;
+	int i;
+
+	for (i = 0; i < kms->n_crtcs; i++) {
+		crtc = &kms->crtcs[i];
+
+		if ((pipe == crtc->master) || (pipe == crtc->slave))
+			possible_crtcs |= BIT(i);
+	}
+
+	return possible_crtcs;
+}
+
+/* use Layer0 as primary */
+static u32 get_plane_type(struct komeda_kms_dev *kms,
+			  struct komeda_component *c)
+{
+	bool is_primary = (c->id == KOMEDA_COMPONENT_LAYER0);
+
+	return is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
+}
+
+static int komeda_plane_add(struct komeda_kms_dev *kms,
+			    struct komeda_layer *layer)
+{
+	struct komeda_dev *mdev = kms->base.dev_private;
+	struct komeda_component *c = &layer->base;
+	struct komeda_plane *kplane;
+	struct drm_plane *plane;
+	u32 *formats, n_formats = 0;
+	int err;
+
+	kplane = kzalloc(sizeof(*kplane), GFP_KERNEL);
+	if (!kplane)
+		return -ENOMEM;
+
+	plane = &kplane->base;
+	kplane->layer = layer;
+
+	formats = komeda_get_layer_fourcc_list(&mdev->fmt_tbl,
+					       layer->layer_type, &n_formats);
+
+	err = drm_universal_plane_init(&kms->base, plane,
+			get_possible_crtcs(kms, c->pipeline),
+			&komeda_plane_funcs,
+			formats, n_formats, NULL,
+			get_plane_type(kms, c),
+			"%s", c->name);
+
+	komeda_put_fourcc_list(formats);
+
+	if (err)
+		goto cleanup;
+
+	drm_plane_helper_add(plane, &komeda_plane_helper_funcs);
+
+	return 0;
+cleanup:
+	komeda_plane_destroy(plane);
+	return err;
+}
+
+int komeda_kms_add_planes(struct komeda_kms_dev *kms, struct komeda_dev *mdev)
+{
+	struct komeda_pipeline *pipe;
+	int i, j, err;
+
+	for (i = 0; i < mdev->n_pipelines; i++) {
+		pipe = mdev->pipelines[i];
+
+		for (j = 0; j < pipe->n_layers; j++) {
+			err = komeda_plane_add(kms, pipe->layers[j]);
+			if (err)
+				return err;
+		}
+	}
+
+	return 0;
+}

drivers/gpu/drm/arm/display/komeda/komeda_private_obj.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
+ * Author: James.Qian.Wang <james.qian.wang@arm.com>
+ *
+ */
+#include "komeda_dev.h"
+#include "komeda_kms.h"
+
+static struct drm_private_state *
+komeda_pipeline_atomic_duplicate_state(struct drm_private_obj *obj)
+{
+	struct komeda_pipeline_state *st;
+
+	st = kmemdup(obj->state, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return NULL;
+
+	st->active_comps = 0;
+
+	__drm_atomic_helper_private_obj_duplicate_state(obj, &st->obj);
+
+	return &st->obj;
+}
+
+static void
+komeda_pipeline_atomic_destroy_state(struct drm_private_obj *obj,
+				     struct drm_private_state *state)
+{
+	kfree(priv_to_pipe_st(state));
+}
+
+static const struct drm_private_state_funcs komeda_pipeline_obj_funcs = {
+	.atomic_duplicate_state	= komeda_pipeline_atomic_duplicate_state,
+	.atomic_destroy_state	= komeda_pipeline_atomic_destroy_state,
+};
+
+static int komeda_pipeline_obj_add(struct komeda_kms_dev *kms,
+				   struct komeda_pipeline *pipe)
+{
+	struct komeda_pipeline_state *st;
+
+	st = kzalloc(sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->pipe = pipe;
+	drm_atomic_private_obj_init(&kms->base, &pipe->obj, &st->obj,
+				    &komeda_pipeline_obj_funcs);
+
+	return 0;
+}
+
+int komeda_kms_add_private_objs(struct komeda_kms_dev *kms,
+				struct komeda_dev *mdev)
+{
+	struct komeda_pipeline *pipe;
+	int i, err;
+
+	for (i = 0; i < mdev->n_pipelines; i++) {
+		pipe = mdev->pipelines[i];
+
+		err = komeda_pipeline_obj_add(kms, pipe);
+		if (err)
+			return err;
+
+		/* Add component */
+	}
+
+	return 0;
+}
+
+void komeda_kms_cleanup_private_objs(struct komeda_dev *mdev)
+{
+	struct komeda_pipeline *pipe;
+	struct komeda_component *c;
+	int i, id;
+
+	for (i = 0; i < mdev->n_pipelines; i++) {
+		pipe = mdev->pipelines[i];
+		dp_for_each_set_bit(id, pipe->avail_comps) {
+			c = komeda_pipeline_get_component(pipe, id);
+
+			drm_atomic_private_obj_fini(&c->obj);
+		}
+		drm_atomic_private_obj_fini(&pipe->obj);
+	}
+}

include/uapi/drm/drm_fourcc.h

@@ -574,6 +574,9 @@ extern "C" {
  * AFBC has several features which may be supported and/or used, which are
  * represented using bits in the modifier. Not all combinations are valid,
  * and different devices or use-cases may support different combinations.
+ *
+ * Further information on the use of AFBC modifiers can be found in
+ * Documentation/gpu/afbc.rst
  */
 #define DRM_FORMAT_MOD_ARM_AFBC(__afbc_mode)	fourcc_mod_code(ARM, __afbc_mode)