Commit 74c520da authored by Amit Kumar Salecha's avatar Amit Kumar Salecha Committed by David S. Miller

netxen: fix tx timeout recovery

Redesign tx timeout handling in line with new firmware
reset design that co-ordinates with other PCI function
drivers.

o For NX3031, first try to reset PCI function's own
  context before requesting firmware reset.

o For NX2031, since firmware heartbit is not supported
  directly request firmware reset.
Signed-off-by: default avatarAmit Kumar Salecha <amit@netxen.com>
Signed-off-by: default avatarDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ec5c50cb
......@@ -178,6 +178,7 @@
#define MAX_BUFFERS_PER_CMD 32
#define TX_STOP_THRESH ((MAX_SKB_FRAGS >> 2) + 4)
#define NX_MAX_TX_TIMEOUTS 2
/*
* Following are the states of the Phantom. Phantom will set them and
......@@ -1145,7 +1146,8 @@ struct netxen_adapter {
u8 link_changed;
u8 fw_wait_cnt;
u8 fw_fail_cnt;
u16 resv4;
u8 tx_timeo_cnt;
u8 need_fw_reset;
u8 has_link_events;
u8 fw_type;
......
......@@ -1434,8 +1434,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
__netif_tx_lock(tx_ring->txq, smp_processor_id());
if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH) {
netif_wake_queue(netdev);
adapter->tx_timeo_cnt = 0;
}
__netif_tx_unlock(tx_ring->txq);
}
}
......
......@@ -66,7 +66,7 @@ static int netxen_nic_close(struct net_device *netdev);
static netdev_tx_t netxen_nic_xmit_frame(struct sk_buff *,
struct net_device *);
static void netxen_tx_timeout(struct net_device *netdev);
static void netxen_reset_task(struct work_struct *work);
static void netxen_tx_timeout_task(struct work_struct *work);
static void netxen_fw_poll_work(struct work_struct *work);
static void netxen_schedule_work(struct netxen_adapter *adapter,
work_func_t func, int delay);
......@@ -875,6 +875,8 @@ netxen_start_firmware(struct netxen_adapter *adapter)
netxen_check_options(adapter);
adapter->need_fw_reset = 0;
/* fall through and release firmware */
err_out:
......@@ -1183,7 +1185,7 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
netdev->irq = adapter->msix_entries[0].vector;
INIT_WORK(&adapter->tx_timeout_task, netxen_reset_task);
INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
if (netxen_read_mac_addr(adapter))
dev_warn(&pdev->dev, "failed to read mac addr\n");
......@@ -1882,7 +1884,7 @@ static void netxen_tx_timeout(struct net_device *netdev)
schedule_work(&adapter->tx_timeout_task);
}
static void netxen_reset_task(struct work_struct *work)
static void netxen_tx_timeout_task(struct work_struct *work)
{
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, tx_timeout_task);
......@@ -1890,15 +1892,37 @@ static void netxen_reset_task(struct work_struct *work)
if (!netif_running(adapter->netdev))
return;
if (test_bit(__NX_RESETTING, &adapter->state))
if (test_and_set_bit(__NX_RESETTING, &adapter->state))
return;
netxen_napi_disable(adapter);
if (++adapter->tx_timeo_cnt >= NX_MAX_TX_TIMEOUTS)
goto request_reset;
if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
/* try to scrub interrupt */
netxen_napi_disable(adapter);
adapter->netdev->trans_start = jiffies;
adapter->netdev->trans_start = jiffies;
netxen_napi_enable(adapter);
netif_wake_queue(adapter->netdev);
netxen_napi_enable(adapter);
netif_wake_queue(adapter->netdev);
goto done;
} else {
if (!netxen_nic_reset_context(adapter)) {
adapter->netdev->trans_start = jiffies;
goto done;
}
/* context reset failed, fall through for fw reset */
}
request_reset:
adapter->need_fw_reset = 1;
done:
clear_bit(__NX_RESETTING, &adapter->state);
}
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
......@@ -2048,6 +2072,22 @@ nx_decr_dev_ref_cnt(struct netxen_adapter *adapter)
return count;
}
static void
nx_dev_request_reset(struct netxen_adapter *adapter)
{
u32 state;
if (netxen_api_lock(adapter))
return;
state = NXRD32(adapter, NX_CRB_DEV_STATE);
if (state != NX_DEV_INITALIZING)
NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_NEED_RESET);
netxen_api_unlock(adapter);
}
static int
netxen_can_start_firmware(struct netxen_adapter *adapter)
{
......@@ -2133,9 +2173,11 @@ netxen_fwinit_work(struct work_struct *work)
switch (dev_state) {
case NX_DEV_COLD:
case NX_DEV_READY:
netxen_start_firmware(adapter);
netxen_schedule_work(adapter, netxen_attach_work, 0);
return;
if (!netxen_start_firmware(adapter)) {
netxen_schedule_work(adapter, netxen_attach_work, 0);
return;
}
break;
case NX_DEV_INITALIZING:
if (++adapter->fw_wait_cnt < FW_POLL_THRESH) {
......@@ -2195,6 +2237,11 @@ netxen_check_health(struct netxen_adapter *adapter)
if (netxen_nic_check_temp(adapter))
goto detach;
if (adapter->need_fw_reset) {
nx_dev_request_reset(adapter);
goto detach;
}
state = NXRD32(adapter, NX_CRB_DEV_STATE);
if (state == NX_DEV_NEED_RESET)
goto detach;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment